Question about 2001 Ford Windstar

1 Answer

How do i buy online the oxygen sensors for a 2001?

How do i buy online the oxygen sensors for a 2001 ford windstar? What is the description? just upstream and downstream?

Posted by on

  • Anonymous Mar 29, 2014

    I checked them out all 4 look the same to me

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 70 Answers

The oxygen sensor are just refered to as upstream for the o2s and down stream are actually refered to as catalytic monitors. So if you have lean or rich codes these would refer to the upstream .

Posted on May 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford windstar engine lean bank 1 and lean bank 2


Google your codes & then diagnose the
system & items related to the codes

Type: OBD Code PO 171 --or whatever the codes are

If you have Oxygen Sensor Codes, it is most likely the upstream sensors have failed, because you did not know they get replaced as preventative maintenance at 100,000 or when they fail, if that is how you take car of your vehicles

Aug 26, 2013 | 2001 Ford Windstar

1 Answer

Oxygen sensors


Replacing is the only way I know of to correct a problem. You could buy used sensors.

May 30, 2013 | 1999 Ford Windstar

1 Answer

Remove key switch


I need to locate code 171 and 174 oxygen sensor my engine light is on for ford winstar 2001

Oct 12, 2010 | 1996 Ford Windstar

1 Answer

Need to know how many oxygen sensors there are in a 2001 ford windstar


2 sensors, bank 1 and bank 2, they are before the catalytic converter

Apr 10, 2010 | 2001 Ford Windstar

1 Answer

2002 Ford Windstar Van


When it is jerking does it nealy stall, if so thats why the alt light flashes, almost stalling.

Have engine "scanned"

Mar 30, 2010 | 2001 Ford Windstar

1 Answer

Ford windstar check engine light comes on after stopping when starting to get moving again shows p0171 & p0174 codes why??


P0171 indicates a lean condition. The most common cause of this is a defective mass air flow sensor. Also check if any vacuum leaks. P0174 OBD-II Trouble Code


Technical Description

System Too Lean (Bank 2)


What does that mean?

Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exhaust.

Note: This DTC is very similar to P0171, and in fact your vehicle may show both codes at the same time.

-----------

Thanks.


Dec 17, 2009 | 2002 Ford Windstar Cargo

1 Answer

I need to locate oxygen sensor on windstar 2001


it will be the only thing sticking out of the exhaust system with wires on it but there should be 2

Nov 30, 2009 | 2001 Ford Windstar

1 Answer

I have a 2001 windstar this showed a code miss fire #3 cyl changed plugs/wires then the guy who is doing the work told me it was the cat converters so he replaced them and it still has a miss fire and runs...


Along the line of cat converters, you should do a visual inspection of your oxygen sensors. they could be bad or causing it. They monitor your exhaust and then adjust the fuel mixture accordingly

Sep 29, 2009 | 2001 Ford Windstar

1 Answer

Change oxygen sensor 2001 ford windstar


fist unclip wire,then unscrew it with a 28mm spanner ,fitting procedure is the reverse .It turns anticlockwise to unscrew and clockwise to screw up ,torque setting is a grunt and two scuffed knuckles and max of 3 swear words

Jan 01, 2009 | 2001 Ford Windstar

Not finding what you are looking for?
2001 Ford Windstar Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...