Question about 1991 Oldsmobile Cutlass Supreme

1 Answer

Power steering high pressure hose needs to be replaced on my 1991 oldsmobile cutlass supreme, 3.1L engine. However, I am unable to find repair guide.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The end going to power steering pump is easily accessible, however the end connected to the steering system is not as accessible. You will need an 18mm crows foot wrench and a long extension. Or since the line is being replaced anyway, cut the metal part of the hose as close to the nut that screws into the steering as possible so that you can use a deep-well socket on a two foot extension with a swivel. The steering mechanism is located approximately below your break booster and the high pressure line is the one closest to the fire wall.

Posted on Jul 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Would codes 33 and 54 cause a 93 oldsmobile cutlass supreme not to start


Code 54 is fuel pump circuit, Low voltage,will cause car not to start. Wiring open circuit/short circuit to ground, fuel pump relay, engine oil pressure warning lamp switch
Code 33 is MAP sensor,voltage high, low vacuum indicated.
Wiring short circuit to positive, hose blocked/leaking, MAP sensor, ECM

Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

1995 Oldsmobile Cutlass Ciera SL Fuel Pump Repair

How To Install Fuel Gas Pump and Sending Unit Lumina Regal Grand Prix...

Hard to start after replacing the fuel pump relay and the fuel pressure...

93 oldsmobile cutlass supreme replacing engine oil pressure sensor Google...

Mar 13, 2016 | Oldsmobile Cars & Trucks

1 Answer

While driving 91 olds cutlass supreme engine revs high but speed does not match, transmission fluid levels are normal


It's possible that the transmission modulator hose came off the valve or has a hole in it. Check the pass side of the trans for a hose hanging or other problems. If not there, check where it hooks to a vacuum source at the engine.

Mar 03, 2011 | 1991 Oldsmobile Cutlass Supreme

1 Answer

How Long to replace a power steering pressure hose? Labor cost?


6 cylinder engine remove and replace pressure power steering hose.

2.2 hrs X there shop labor rate = your labor cost.

Pre Mitchell labor guide

Jun 11, 2010 | 1992 Oldsmobile Cutlass Supreme

4 Answers

On a 1994 olds cutlass supreme SL can i put a regular rubber hose over a leak on the power steerings high pressure hose to buy myself time before i can afford to replace it? i plan on hose clamping it...


If it is a small leak you might be able to wrap it with a rubber hose and apply several clamps to put a band-aid on it. However, this is only temporary at best and could still cause problems depending on where it is leaking. One possible alternative to a new hose - if you take the hose to a shop like The Hoseman (or equivalent) they can rebuild the hose cheaper than buying a new one.

Jan 30, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

How to put on power steering pressure hose


Take the hoses to the nearest Hose Man Store. They will assemble and crimp as needed or as you specify.

Oct 22, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

1992 cutlass supreme power steering line leaks


you have to remove the driver side wheel and splash shield .its a very tight spot to get your arms and hands.if you got 3.1 engine remove the alternator .could help some.

May 13, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1991 oldsmobile cutlass supreme


Check for fuses/power/ground to the engine computer (or injector drive computer) whatever the case is.

Spark, fuel pump, and starter all are independant of the fuel injection computer.

Either the computer itself has gone bad, or it is not receiving power or ground, or wiring to the injectors might be bad...

Aug 28, 2008 | 1991 Oldsmobile Cutlass Supreme

1 Answer

1991 oldsmobile cutlass supreme 3.1 engine


I had an oldsmodbile that did the same thing and it was a vacuum hose problem. You need to check all your vacuum hoses for leaks and the connections.

Aug 08, 2008 | 1991 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1991 Oldsmobile Cutlass Supreme Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...