Question about 1993 Honda Civic 4 Door

1 Answer

Crank but no fire

It will turn over with a fully charged and full of gas battery will spark but motor acts as no spark or fire

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On any car always check ur fuses first... and ifthat does't work then check your distributor by taking out a spark plug from only one cylnder and put it in the plug and lay it on the block. then turn your key as if to crank it and c if ur getting a spark from the spark plug. if u aren't, then its either the distributor cap, a worn rotory button inside the distributor cap or it could be the moduel inside the distributor which would then mean youll have to replace the whole distributor

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed harmonic balancer on my 1994buick regal custom the serpintine belt and the sencor car want crank


Are you saying the starter motor won't crank the engine?
Was it working ok before you worked on it?
Make sure battery has a full charge, if it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse.
Are there any applicable trouble codes? If you fully obd1 compliant, you should be able to check some codes, yourself.
Your cam and crank sensor share ref voltage and ground, I'd want to check that.

Apr 24, 2017 | Cars & Trucks

1 Answer

We have a 2004 3.5L that does not fire


Usually if it cranks good but won't start, have a helper crank it while you check for spark at the spark plugs, gasoline engine. If spark everywhere, use a gage and check proper fuel pressure and fuel injector pulse. How long since a tune-up? Are there any applicable trouble codes? Don't crank starter motor more than few seconds at a time, let it cool off a little. Make sure battery has a full charge.
Your make and model didn't post for some reason?

May 17, 2016 | Cars & Trucks

1 Answer

My 94' Saturn SL won't start...acts like it's not getting any gas although it does. Acts like it wants to start but never does....what could be my problem?


Make sure battery has a full charge. If it cranks good but won't start, have a helper crank it while you check for spark at the plugs. If spark everywhere, use a gage and check proper fuel pressure and fuel injector pulse. Can you check for applicable trouble codes?
Unless you can do some testing, I don't know how to help?

Jan 18, 2016 | Saturn Cars & Trucks

1 Answer

89 camery no start , has fuel p.s.i. , injectors fireing , spark on all plugs , compression even across


Have you checked cam timing?If it has jumped a tooth or two it will not start.

Jun 18, 2017 | 1989 Toyota Camry

1 Answer

1966 ford pickup 352 motor turns over but acts as if the battery is dieing has new starter battery, cylanoid and wires


Battery may not have enough cranking amps to turn it over. Those old fords need at least 800 cca and to be fully charged. Keep in mind that not all new starters (parts in general) are always good. Make sure nothing else is drawing a bunch of juice from the battery at the same time. Like an aftermarket stereo for instance.

Nov 12, 2012 | 1966 Ford Mustang

1 Answer

The motor will turn over but will not crank, it cranked just fine yesterday and it has plenty of gas.


you need to check to see if the battery is fully charge and you have spark and you may need to have the crank sensor tested give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your truck wish you the best of luck Michigan Man.

Jan 12, 2010 | 1999 Dodge Ram

2 Answers

I have a 460 ford motor won't start. it just cranks and cranks. tried adjusting the timing no luck. Both batteries fully charged. The starter is fairley new, maybe 2 yrs old . i am getting spark out of the...


pull of dist. cap and see if rotor turns while someone cranks it for you. just had that problem and it was a timing chain. are you getting fuel?

Oct 15, 2009 | 1986 Ford F 250

3 Answers

Moved my rx8 yesterday.i got ack in it this


verify condition by spraying some starter fuel in it.it should start and die if its a fuel problem.
if it still does nothing start checking any and all fuses.if all the fuses are good take out a spark plug and verify no spark.
if no spark check the ignition module.
it might be able to have it checked at autozone for free.but you will have to remove it.

Jun 12, 2009 | 2005 Mazda RX-8

2 Answers

2003 pt cruiser sensors


check the battery and make sure it has a fully charge,also check to make sure the start motor pinion is not jammed in the flywheel, and check the coil pack to make sure have spark.also check the crank sensor

Feb 14, 2009 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
1993 Honda Civic 4 Door Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...