Question about 2007 Suzuki Forenza Sedan

1 Answer

I have a 2007 Suzuki Forenza Sedan. I have no break pedal pressure, the pads are new and the fluid level is correct. I can pump the pedal several times, push the pedal all the way to the floor and the left front wheel will lock up and slide the tire. HELP, please.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Sounds like you're having an issue with your master cylinder, or you just need to add break fluid and bleed the lines. If you don't know how to do that, take it to a mechanic.

Posted on Jun 17, 2010

  • Rola02 Jan 15, 2011

    mines doing the same thing i just bought a new master cylinder for mine and hopeing to get it installed today. Lets hope it will fix the problem

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to check transmission fluid suzuki forensa 2007


asked about 1,000 times now.
same answer, its in the FSM, get one and read it.
and at google, even a video
https://www.google.com/webhp#q=2007+Suzuki+Forenza++check+ATF

you will note the operators guide, skips this.

Feb 20, 2014 | 2007 Suzuki Forenza Sedan

1 Answer

Brake pedal slowly go to when at stop


you mean the pedal drops to the floor. when you press it.
?
1: leaks fluid. (look)
2: fluid low ?
3: bad MC, bad master cylinder.
4: last mech left air in the system. bad. bleed it .

Jul 03, 2012 | 2007 Suzuki Forenza Sedan

1 Answer

Where is the fuel pump in a 2007 suzuki forenza


in the fuel tank if you lucky there is a cover under the back seat to get to it with out dropping out the tank

Apr 25, 2012 | 2007 Suzuki Forenza Sedan

1 Answer

Speed sensor 2007 suzuki forenza


I need to no way does the speed sensor located on a 2007 Suzuki forenza sedan

Feb 02, 2012 | 2007 Suzuki Forenza Sedan

1 Answer

How to add transmission fluid to 2007 susuki forenza?


THERE WILL BE A DIPSTICK FOR THE TRANSMISSION IF IT IS AUTOMATIC! STANDARD WILL BE A SERVICE PLUG ON THE SIDE OF THE TRANSMISSION! IF IT IS AUTOMATIC, PULL THE DIPSTICK OUT, PLACE A LONG TUBE FUNNEL IN THE DIPSTICK HOLE, AND SLOWLY ADD THE FLUID, CHECKING TO BE SURE YOU DON'T OVERFILL IT! YOU MAY HAVE TO ADD A LITTLE, AND REPLACE THE DIPSTICK, TILL YOU REACH THE FULL MARK! BE SURE YOU ARE ON LEVEL GROUND!

Feb 26, 2011 | 2007 Suzuki Forenza Sedan

1 Answer

2007 suzuki forenza brake lights will stay on after i shut the car off and there is a burning smell in the trunk any help?


Are they always on? If so, your break switch button is probably stuck. It is located above the break pedal. It is a chrome looking round cylinder. The break pedal hits the button and turns the light on. That button may be stuck. You can try to loosen it up.

Feb 23, 2011 | 2007 Suzuki Forenza Sedan

1 Answer

2005 suzuki Forenza....clutch pedal all the way to the floor but there is no visible leak of break fluid and fluid level is good. Pedal can be moved with no resistance (except return spring on the pedal)...


If no fluid loss,then i would squeeze the fluid line (rubber part) to the slave cylinder. If you now have pressure in the pedal replace the slave cylinder. If still no pressure then change the clutch master cylinder.

Jul 02, 2009 | 2006 Suzuki Forenza

Not finding what you are looking for?
2007 Suzuki Forenza Sedan Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...