Question about 2006 GMC Envoy

1 Answer

Compressor will not engage - 2006 GMC Envoy

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers


Look at the front of the ac compressor and have someone turn on the ac from inside the car. The front of the pulley(clutch) will spin when turned on.

If it does not spin, the low pressure switch (LPS) is not satisfied. Meaning there is not enough freon in the system to operate the system. Means low freon capicity because of a leak.

The LPS can be jumpered to cause the compressor to run (clutch to engaged) which will draw the freon in the system.

The LPS is usually a two wire sensor on the suction of the compressor. (between evaporator and compressor) Unplug the sensor and install a jumper, this will engage the clutch. Connect a new can of freon
and fill to system capacity.

The capacity of the ac system will be on a label under the hood, do not overfill. Probably about 2 lbs. Local parts stores (Auto Zone and Advance) will have freon with stop leak. This may help the leak. They also make a freon with a UV dye. I always add a single can with dye so that if stop leak does not work I can find the leak in the future.

The system should be filled until suction pressure is about 30 to 38 psi..

Posted on May 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AC compressor not engaging on 2003 Explorer Eddie Bower


the compressor is protected by a pressure switch to prevent from damage of the compressor when ever the prion gas is leaking there no pressure on the system so the compressor will not engage check for the linking of the system

Apr 28, 2013 | 2003 Ford Explorer

1 Answer

Compressor clutch engaged with heat selected on 2004 silverado


Sounds like a problem with the selector switch or the HVAC control module, or the PCM.
The PCM thru the control module grounds the compressor relay when the compressor is needed.

Sep 22, 2012 | 2004 Chevrolet Silverado 1500 Crew Cab

2 Answers

Vt aircon compressor wont engage


check the freon, if there isn't enough it won't engage, could also be the low pressure switch or a fuse.

Sep 05, 2012 | Holden Cars & Trucks

1 Answer

My air conditioner is blowing warm air on the driver side and cold on the passenger side


see this steps and think with clearly and logically NOT feared. God bless you
checkmark.gif Start with the compressor. Does it engage when you turn on the A/C?
If so, the compressor is working and the A/C system probably contains enough refrigerant to make cold air, so the problem is inside the HVAC unit. Replace the motor that controls the blend air door (this is a difficult job and best left to a professional since it involves tearing apart the HVAC unit -- about an 8 to 10 hour job!).
If the compressor does not engage when you turn on the A/C, see if it will run by jumping the compressor clutch wire directly to the battery (use a fused jumper wire). If the compressor works when you jump it, and the A/C blows cold air, the system contains refrigerant and the fault is likely a bad A/C compressor clutch relay or a bad clutch cycling switch or pressure switch.
If the compressor does not engage when you jump it, the problem is a bad compressor clutch.
If the clutch engages but the compressor does not turn (the belt will start to slip and squeal), the compressor is locked up and you need a new compressor.
If the compressor clutch engages and turns the compressor, but the A/C still does not blow cold air, the system is probably low on refrigerant and needs to be recharged.

7_25_2012_8_45_21_am.jpg

Jul 24, 2012 | 2007 GMC Sierra Classic

1 Answer

Ac does not engage


Most vehicles have a low pressure switch that prevents the compressor from engaging so as to prevent damage to the compressor. You need to place a gauge set onto your AC to read the high and low sides of the system. Probably have lost enough gas(R134) over time to prevent the compressor from engaging. You can jump the pressure switch to check it with a simple jumper wire.

Apr 14, 2012 | 2000 Chevrolet Malibu

1 Answer

1996 Lincoln Town Car. The A/C compressor will not engage. Freon is not an issue because I have by-passed the low pressure cycle switch. The control in the car is on "max ac". I have also replaced the A/C...


Is the solenoid clutch holding on to engage the compressor, if not the relay or the fuse or the sitch is not active. check the connection to the relay.
If solenoid is turning the compressor then there is no pumping and so the cooling does not happen.It can be failure within the compressor, needs an overhauling .

Sep 29, 2010 | Lincoln Town Car Cars & Trucks

2 Answers

AC Compressor not engaging on 2000 Chevy Impala. Fuses and AC relay okay. No power at compressor. Need wiring diagram. Also need to know if compressor requires 12v for operation. If not what should voltage...


When your R-134a runs too low it will NOT engage the compressor. You need to refill your a/c system before the clutch will engage, I also suggest finding the leak.

Apr 20, 2010 | 2000 Chevrolet Impala

1 Answer

A/c compressor engages intermittently


Check the connections on the plug going to the compressor clutch and on the pressure switch on the low side. Also check the gap on the clutch. It may be too wide after where to engage correctly. Good luck.

Jul 23, 2009 | 1996 Ford Contour

1 Answer

1992 town car no air conditioning


if you have freon in the car and the compressor still doesnt engage check the clutch on the front of the compressor and if that doesnt engage you need a replacement clutch

Mar 27, 2009 | 1992 Lincoln Town Car

Not finding what you are looking for?
2006 GMC Envoy Logo

671 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...