Question about Cadillac DTS

1 Answer

Where can I purchase front door panel retainer clips for 2000 cadillac DTS? There are two typs one is green and the other is white, both plastic. I've tried everywhere no luck.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. Please try these links---


Door Panel Retainer Clips

Door Panel Retainer Clips I

Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on May 29, 2010

  • wgreen8091 May 29, 2010

    Rylee, I appreciate the help, but I didn't see the retainer clips that I have. Maybe I won't be able to find an exact replacement part. Maybe I'll have to find a retainer that works, but may not be the same as the OEM. I've already order some clips from a GM Parts Website and they wont work. If I could be sure they'll work I'll use them. What else can I do. Again I thank you for your help.

  • Rylee Smith
    Rylee Smith May 29, 2010

    They should work as they are for your 2000 cadillac DTS only.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove door panel for 2007 dts Cadillac


Hi Terry,
I know that you have to remove the screw(s) securing the handle in place. Then you should be able to pop the panel using a trim tool. See below for a helpful site:
got expert answers at JustAnswer Try it yourself
Also try searching online for "remove door panel Cadillac DTS". This should bring up the more accurate reference in Justanswer.com also some YouTube clips.

Jul 25, 2015 | Cadillac Cars & Trucks

3 Answers

How do you fix a passenger door handle on a Ford Explorer 1999


inside or outside????????. either way remove the door panel. the rest is easy

Apr 24, 2015 | 1999 Ford Explorer

1 Answer

Why will driver doorl only open from inside the car?


The outside door handle broke ! you can only see what broke by taking the door panel off . It's plastic an they break ! $47.95 new 1Aauto . This video is just to show you what has to be done to get to it ! 2006 2011 Cadillac DTS Paint to Match Outside Door Handle Rear Driver Side How To Install Replace Outside Front Door Handle Cadillac DeVille 94 99...

Aug 23, 2014 | 2007 Cadillac DTS Sedan

1 Answer

Rear door beltline trim removal


Pull the panel around the outer periphery there are bird beak plastic retainers holding the panel to the inner door metal. You will have to give it a slight jerk with hand or purchase a tool at the local auto store to slid under the panel in the clip area. You can buy birds beak retainers at the auto store if you break them.

Dec 04, 2013 | 2000 Saturn L-Series

1 Answer

Removal of front door panel 2000 Cadillac Deville


Usually a couple screws at the door handle and plastic clips along the sides and bottom. I strongly suggest getting the tool for the clips. It's cheap and you don't want to break the clips. Once the panel is free from the door it slides up and off.

May 27, 2012 | 2000 Cadillac DeVille

1 Answer

2000 cadillac deville remove door panel


2000-2001 Deville Door Panel Removal:

1. Position window fully downward and ensure manual lock knob is in unlock position.
2. Disconnect locking clip at front of manual lock knob, by insertingsuitable flat bladed tool into top service notch.
3. Remove manual lock knob.
4. Remove inside handle bezel by holding inside handle to open position, inserting sutiable flat-bladed tool at front lower corner and prying outward.
5. Remove bezel.
6. Remove inside door handle mounting screw.
7. Disconnect eight retainers around outside edges of door trim panel using clip zip tool No. J-36796, or equivalent.
8. Slide door trim panel upwards to release alignment datums, eight retainers, armrest steel retainer clips and inner belt mouldings (see fig #7 amd #8).
9. Disconnect electrical connector(s).
10. Reverse procedure to install.

23785ad.jpg

Hope this help (remember rated this).

Mar 28, 2010 | 2000 Cadillac DeVille

1 Answer

How do I remove the REAR door panel on my 2004 Cadillac Deville dts


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Jun 07, 2009 | 2004 Cadillac Deville

1 Answer

Door panels


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Nov 13, 2008 | 2004 Cadillac Escalade

1 Answer

Rear door panel 2002 cadillac dts


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Oct 02, 2008 | 2000 Cadillac DeVille

2 Answers

2000 Hyundai Elantra driver's power window will not raise


don't know why but the glue gets weak where the plastic pieces attach to the bottom of the window.i've had to fix mine more than once.remove the door panel,then take the nuts lose from the back of the plastic retainers,then-going by the residue left from the old glue mark where the retainers go back-re glue,realine and reinstall.panel removal-philips screw holding the door handle,1 philips screw holding armrest/window controls,two philips screws at front of panel above speaker,then gently pry clips behind the edges of the panel.if the plastic window retainers are beyond repair,i think they have them in the help section of advance/autozone.

Sep 20, 2008 | 2000 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...