Question about 2006 Cadillac CTS

Open Question

Service theft system & TC showing on the display

When i start the car it shows service theft system & TC lights indicates

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 1994 cadillace anti theft system

I just had this same problem with a '96 . do you have a vats key in your '94? you need to bypass the VATS system. read some of the blogs on this site and it will tell you how to do it. I fixed mine with a $2 resistor from radio shack.

Posted on Oct 12, 2008

Ad
honeymokey
  • 3113 Answers

SOURCE: Starting disabled due to anti-theft system

Replace ignition lock cylinder and chip key. The wires have broken.

Posted on May 23, 2009

  • 20 Answers

SOURCE: Fuel pump won't run Theft system shows P1260 code

It sounds like the computer chip in the key is bad. They get damaged really easy and that will cause the fuel pump to stop. If the "Theft" light is flashing continuously when you try to start it, that is the problem. You should be able to get a new key from the dealer or off ebay, and have it programmed. Should be under $100.

Posted on Jun 05, 2009

  • 82 Answers

SOURCE: THE CAR WON`T STAR, IT SHOWS THE THEFT ALARM

first try another fob, then another ignition key. If none of these work then you need to find the alarm controle module some where under the dash by the steering colume. once you have located the controle module trace the wires usally a red with block stripe back to where it is tee tapped to the wires of the ignition switch. unplugging the tee tapp should allow you to start the vehicle. but the alarm will be deactivated

Posted on Mar 21, 2010

ZJLimited
  • 17970 Answers

SOURCE: anti theft system came on dash. shut the car down

The SECURITY light is located on the instrument panel cluster.

If the ignition is off and any door is open, the SECURITY light will flash, reminding you to arm the system. To arm the system, do the following:
1. Open the door.
2. Lock the door using the power door lock switch with the door open or the remote keyless entry transmitter. The SECURITY light should come on and stay on.
3. Close all the doors. The SECURITY light should go off within approximately 30 seconds. If a door or a trunk is opened without a key or a remote keyless entry transmitter, the horn will sound and the lamps will flash for about 30 seconds.

Also can check this and other details in the 2002 Cadillac Owners Manual (page 85 and next).

Hope helps (remember rated and comment this).

Posted on Jun 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chevy aveo starts then kind of putts followed by shutting off just had the converter and O2 sensor replaced. The radio and lights work great car just won't stay running once u let go of the key


Anti-theft system problem , possibility ! Do you have a security light blinking ? Security Indicator
The security indicator is located in the clock on the top of the instrument panel. The light emitting diode (LED) displays the immobilizer system status. The immobilizer contains the LED driver hardware for direct connection of the LED.
Vehicle Theft Deterrent (VTD) Operation
The immobilizer system design prevents vehicle theft by interrupting the engine operation. The immobilizer system prevents the vehicle from starting. The engine operating functions interrupt if the immobilizer system does not recognize the transponder identification code of the ignition key. The immobilizer system and the content theft deterrent system do not interact. The system includes the following components:
?€¢
The ignition key


?€¢
The column-mounted theft deterrent module with integrated antenna


?€¢
The transponder


?€¢
The engine control module (ECM

Mar 03, 2016 | Cars & Trucks

1 Answer

How am i supposed to get ride off the Service theft system?


It's hard to fix something if you don't know how it works ! Fixed ignition ? What did you fix or change ?
SERVICE THEFT SYSTEM
Security: Refer to Theft Systems Description and Operation in Theft Deterrent
You need to have it checked for trouble codes .
The theft deterrent system on this vehicle is comprised of two separate systems, the vehicle theft deterrent (VTD) system and the content theft deterrent (CTD) system. The VTD system prevents drive away theft by keeping the vehicle from starting. The CTD system is the vehicle alarm system which discourages unauthorized entry into the vehicle. These systems are described and diagnosed separately within this section.
Theft System Indicators
SECURITY The instrument panel cluster (IPC) illuminates the SECURITY indicator as determined by the vehicle theft deterrent (VTD) system and the content theft deterrent (CTD) system. The IPC receives a message from the theft deterrent control module or the rear integration module (RIM) via the serial data circuit requesting illumination.
?€¢
The VTD system requests the IPC to illuminate the indicator only when the ignition switch is ON. The VTD system uses the indicator as a malfunction indicator. For specific VTD condition that will illuminate the security indicator, refer to
Vehicle Theft Deterrent (VTD) Description and Operation .


?€¢
The CTD system requests the IPC to illuminate the indicator only when the ignition switch is OFF. The CTD system uses the indicator in order to identify system status. For specific CTD condition that will illuminate the security indicator, refer to Content Theft Deterrent (CTD) Description and Operation .


?€¢
The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
SERVICE THEFT SYSTEM The radio illuminates the SERVICE THEFT SYSTEM message when the VTD system detects a failure. The radio receives a message from the theft deterrent control module via the serial data circuit requesting illumination.
This is one you need to take to the dealer , unless you have a GM factory scan tool !

Nov 21, 2015 | 2004 Cadillac CTS

1 Answer

How do i reset securilock anti theft lock


try key in ignition turn to number 2 on ignition so lights on dash and press the fob button to lock then unlock the doors. should reset.

Jul 24, 2017 | Cars & Trucks

1 Answer

Chevy Malibu LS (V6-3.1 L) won't start or starts up and IMMEDIATELY dies, how can I diagnose the problem?


Your car starts and dies due to the failing antitheft system. Your vehicle is not receiving the "fuel enable" signal that it needs to keep running. So the injectors get turned to off to prevent theft. You will need to diagnose which part of the antitheft system is failing. Or bypass the entire security system. This link will help you understand the problem, and depending on the year of your vehicle, possibly a good bypass solution.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

May 18, 2012 | Cars & Trucks

1 Answer

Theft light is flashing and car died this morning after started to miss


The theft indicator on the instrument cluster will operate as follows:
• When the ignition is OFF, the theft indicator will flash briefly every two seconds to indicate the SecuriLock system is protecting your vehicle.
• When the ignition is turned to ON or START, the theft indicator will light for three seconds and then go out. If the theft indicator stays on for an extended period of time or flashes rapidly, have the system serviced by your dealership or a qualified technician.

Hope helps.

Jan 12, 2011 | 2001 Ford Taurus

1 Answer

The dash indicator light is on showing the


YOUR CAR IS IN THEFT SECURITY MODE.TRY USING DIFFERENT KEY.IF ANOTHER KEY DONT WORK.YOU HAVE PROBLEM IN THE SWITCH AND BCM.TO GET CAR TO STARTED TURN THE IGNITION WITH KEY IN TO ON POSITION WITH ENGINE OFF FOR 10 MINUTES.WATCH THE PADLOCK.IF IT TURNS OFF.TURN OFF IGNITION SWITCH FOR 5 SECONDS.THEN TRY TO START ENGINE.IF ENGINE STARTED PROBLEM IS IN THE IGNITION SWITCH AND BCM.IF YOU GET VECHICLE RUNNING NOT SAFE TO DRIVE BECAUSE THE VECHICLE WILL GO IN THEFT MODE SHUT OFF YOUR FUEL PUMP WHILE YOU ARE DRIVING IN HEAVY TRAFFIC. DONT LET GO GET IT FIX FOR YOUR AND FAMILY SAFETY.

Apr 25, 2010 | 2003 GMC Yukon XL

2 Answers

Hi i have just had my car Renault Clio on a 06


- By dancer23 on Feb 18, 2010 -

Earlier i posted a question requesting how to switch off the service light on my Renault Clio, i have found an answer to thios, as follows.
How do you reset the service indicator light 2007 renault clio?

Turn on the ignition, but don't start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows 'Service Due' press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.
Turn on the ignition, but don't start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows 'Service Due' press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.

all of the above is correct apart from pressing the toggle button. if you instead press the bottom toggle button for 10 seconds the display will start to flash. Keep button depressed and 5 seconds later the service counter will reset.
I know this works as i have just done it myself,
I hope this will help many others .

Feb 18, 2010 | 2006 Renault 181

1 Answer

THEFT SYSTEM PROBLEM


u need the owners manual. it tells how to change the theft deterrent system.

Oct 05, 2009 | 1998 Cadillac Seville

1 Answer

What does the light showing the tread of a tire indicate. Dont have service manual


HI. This will be the TC light you are noticing at this time. When this light is illuminated, it will signal that the traction control module is active and operational.

Oct 01, 2009 | 2008 Toyota Highlander

1 Answer

Check malfunction light and vsc lights on for 2002 toyota 4runner


Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with some of the components it stores the correspondent trouble code(s) in its memory and lights up the Check Engine, Service Engine Soon, ABS, VSC Or TC lights to tell you that there is a problem and you should have the car diagnosed and repaired. When there is a problem with the engine control system, any other systems that communicate with the engine control module (ECM) may turn on their indicator lights at the same time because a code has been stored in the ECM. I would take it to a service center you trust and let then come up with a solution. Sometimes a problem in one system will turn light on for other systems that communicate with it, but it doesn't mean there is a problem in those systems.

Please let me know if this information is helpful. Positive feedback is appreciated. Thank You!

Mar 20, 2009 | 2002 Toyota 4Runner

Not finding what you are looking for?
2006 Cadillac CTS Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...