Question about 1994 Toyota 4Runner

1 Answer

Need to know speaker wire colour config for 1994 4runner (toyota) as well as power and earth wires

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,274 Answers

A Right Front Speaker (+) Green Gray B Left Front Speaker (+) Pink White C +12 Volt Ignition Wire Gray Red A B C D K L D +12 Volt Battery Wire Blue w/ Yellow Stripe Yellow E Right Front Speaker (-) Blue Gray w/ Black Stripe E F G H I J M N O P F Left Front Speaker (-) Purple White w/ Black Stripe G Ground Wire Black Black H Power Antenna Wire 1 Blue (join wires 1 & 2 I Power Antenna Wire 2 together to this blue wire) AS VIEWED FROM MATING END OF CONNECTOR Do Not Use J K Right Rear Speaker (+) Red Purple L Left Rear Speaker (+) Black Green M Right Rear Speaker (-) White Purple w/ Black Stripe Do Not Use N Do Not Use O P Left Rear Speaker (-) Yellow Green w/ Black Stripe

Posted on May 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What wire color code (function) on a clarion arx5170 stereo


red wire is live (battery) yellow wire live only when ignition is on, black wire is earth(car body) there should also be 4 pairs of wires green,white,grey and purple these are your speaker wires you'l notice with the pairs of same colour eg white one is solid colour one has a black stripe the solid colour goes to live + on your speaker the one with stripe goes to - on speaker, same goes for the rest of the pairs hope this helps

Mar 31, 2014 | Cars & Trucks

1 Answer

1985 toyota carolla csx need wiring colours for radio


1985 Toyota Corolla Car Stereo Radio Wiring Diagram
Radio Constant 12V+ Wire: Blue/Yellow
Radio Switched 12V+ Wire: Gray
Radio Ground Wire: Brown
Radio Illumination Wire: Green
Left Front Speaker Wire (+): Pink
Left Front Speaker Wire (-): Purple
Right Front Speaker Wire (+): Light Green
Right Front Speaker Wire (-): Blue
Left Rear Speaker Wire (+): Black
Left Rear Speaker Wire (-): Yellow
Right Rear Speaker Wire (+): Red
Right Rear Speaker Wire (-): White

Nov 04, 2012 | 1991 Toyota Corolla

1 Answer

I need a radio wiring diagram for a Holden Commodore LS 1991


Regardless of colour coding, please follow the following instructions (require multimeter):


Note: Attach multimeter earth wire (black) to the vehicle body. Convenient places may be the metal ignition barrel, the vehicle's car arial plug, cigarette socket body etc.


1) Testing for voltage with key out of the ignition, locate the permanent positive wire. This will wire into the yellow wire on your new stereo. The yellow wire circuit powers the stereo's memory.


2) Testing for voltage again. This time you are testing for a wire which only offers power with the ignition turned on. This one will wire into the red wire on your new stereo, and will power the unit only with the ignition on.


3) Now you know which your vehicle's positive wires are you can now test for an earth wire. Switch the multimeter to the resistance setting. There is one setting which will allow a buzzer to sound once you find continuity. With the ignition off test each wire until you get a buzz and a low resistance reading. This should be your earth wire. Double check this with the ignition in the on position. It should remain the same. If it changes to a positive with the ignition on and with the vehicle's lights switched on, then this is the dimmer feed for the stereo's screen. If you unintentionally found the dimmer feed, then you can ignore this wire, and search again for a wire which only offers an earth.


Now you have your power and earth wires located and can wire these into your stereo before continuing.


4) Next you need to use the stereo's balance and fade controls to allow only one speaker output to work from the stereo. So let's start with Left Front speaker output only. turn the stereo volume to mid way so that you can hear when you have connected to the right speaker. bare the remaining wires on the car side and test combinations of the remaining wires until you find the front left speaker of the car. Wire your stereo's wires once you find the correct connections.


5) Repeat the above steps with all remaining wires, remembering to adjust your stereo's balance and fade controls to only allow one speaker output at a time, to ensure the only one possible channel to work and help you identify which of the car's wires power the speaker you have selected.


Before re-assembly of the dash panel, check that your stereo and all functions work properly, being sure to use your fade and balance controls again to test all speakers individually.


If you want to be extra careful and wire the vehicle's speakers positive and negative, according to your stereo's outputs, not that this makes much difference on standard stereo arrangements, then follow this next step:


Make sure you can see the speakers themselves and connect a 1.5 volt AA or AAA battery to the speaker wires. If the speaker's cone pushes forwards, then the wire you connected to the battery's + terminal is indeed the positive wire and should be wired as such. If the speaker does the reverse, then you have the wires the wrong way around. Do not repeat this test for extended periods as damage may be caused to the speaker circuit.


Tip: Always solder all connections and insulate well from each other. Stereo connections can corrode over time and are prone to movement behind the dash. Poor connections may cause faults and low quality sound.

Oct 30, 2012 | Cars & Trucks

1 Answer

1991 toyota carolla seca cs limited head unit wiring colour codes


Radio Constant 12V+ Wire: Blue/Yellow
Radio Switched 12V+ Wire: Gray
Radio Ground Wire: Brown
Radio Illumination Wire: Green
Left Front Speaker Wire (+): Pink
Left Front Speaker Wire (-): Purple
Right Front Speaker Wire (+): Purple
Right Front Speaker Wire (-): Light Green
Left Rear Speaker Wire (+): Black
Left Rear Speaker Wire (-): Yellow
Right Rear Speaker Wire (+): Red
Right Rear Speaker Wire (-): White

May 25, 2012 | 1991 Toyota Corolla

1 Answer

I need a circuit diagram for a 2000 Hyundai accent sterio plug. ie colours for speaker wires, power, ign, dash lights etc.


speaker wires you can connect one at a time to see which is which as for the others black is earth, red is usually ignition, yellow is constant power (memory) and sometimes you'll have a blue wire for power out or you can usually just buy an adaptor plug to suit most stereos

May 18, 2010 | 2000 Hyundai Accent

1 Answer

Trying to find what colour the power and the earth wires are in my 1998 land cruser


Usually the power wire is red + positive and the earth wire or ground is usually black - negative.

May 09, 2010 | 1998 Toyota Land Cruiser

1 Answer

Radio wires 1 yellow, red, green, blue, and orange


red is positive ,black is earth,blue is electric aeriel,yellow and green are the speakers and the same coloured wires with a black stripe are the speaker return

Mar 01, 2009 | 1987 Ford F 350

2 Answers

Request for the wiring diagram for a 1989 UK spec Toyota Corolla Hatchback


Sure. Glad to provide assistance.

89 Corolla radio wiring colours:

Power- Solid GREY -
from the 7.5 amp RADIO fuse

Backup power - BLUE w/YELLOW tracer
from the 10 amp DOME fuse

RF speaker - LIGHT GREEN and BLUE
LF speaker - PINK and VIOLET
RR speaker - RED and WHITE
LR speaker - BLACK and YELLOW
Ground/Earth - BROWN

The graciousness of a FixYa rating would be greatly appreciated.

Jan 19, 2009 | 1989 Toyota Corolla 2 Door

3 Answers

Need radio wiring color info.


the best way to find out which wire is which is grab a test light now find the BATTERY WIRE and IGNITION WIRE the battery wire should constantly have power and the ignition wire should only power up when u turn the ignition on

the other wires are ur speaker wires what u would need to do is get a AA battery snip the wires that have the same colour but one should have a striped colour with it and make the wires touch both ends of the AA battery u will hear a speaker make static sound this will determine which speaker that wire goes to

Let me know how u go

BTW the earth wire just goes to the body and u will have a Interior light wire wire that to the cigerette lighter globe

Nov 14, 2008 | 2004 Mitsubishi Lancer

1 Answer

86 celica radio wiring


I can help you...
Here are the correct wiring colours and their usage:

GREY: Power IN from the 7.5 amp RADIO #2 fuse (Hot with key ON)
LIGHT BLUE with a YELLOW Tracer: Power IN from the 15 amp RADIO #1 fuse (Hot all of the time)
PINK: LF Speaker +
VIOLET: LF Speaker -
LIGHT GREEN: RH Speaker +
BLUE: RH Speaker -
BLACK: LR Speaker +
YELLOW: LR Speaker -
RED: RR Speaker +
WHITE: RR Speaker -
BROWN: Ground/Earth.
This sdhould get you up & going; hope it helps; and THANKS for choosing FixYa!

Oct 27, 2008 | 1986 Toyota Celica

Not finding what you are looking for?
1994 Toyota 4Runner Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...