Question about 2000 Dodge Durango

1 Answer

My 2000 dodge durango hesitates sometimes when

My 2000 dodge durango magnum V8 has about 186,000 miles on it however it runs well except that it hesitates sometimes when going uphill. I can usually accelerate through it. Why is it doing that?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers

I understand from the question that your car is manual? if that's being the case, I would suggest checking the clutch because if its worn out then that's why you are not getting enough force on the differential. replace the clutch if it has never been replaced is my first consideration.

A mechanic guy will tell you if the clutch is good or bad by simply testing the clutch. Let him also tell you what are the things that you need to replace in order to fix the problem. Diagnostics are free most of the times just tell them that you want to know what the problem is.

Hope that helps. let me know.

Posted on May 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can C goes down with the exception of the SCCM. Dodge Magnum which restarts and runs with no communication with can C.


dashboard lights and gauges : Dodge Magnum Common ...

repairpal.com > Problems > Dodge > Magnum
Dodge Magnum Problems. dashboard lights and gauges on Dodge Magnum. Average ... Car can be setting in park or going down highway. ... Randomly all my dash lights will start flickering all at once and my a/c with stop blowing temporarily.

Oct 12, 2015 | Dodge Cars & Trucks

1 Answer

I need to know where the throttle position sensor is in my 2000 dodge durango v8 magnum 5.9


I have a 4.7 but I believe the TSP is in the same place - looking at the throttle body from the drivers side fender, there should be two electrical plugs. The TSP is the bottom plug - disconnect the connector, and loosen the two torx screws holding it in - 5 min fix.

Aug 05, 2010 | 2000 Dodge Durango

2 Answers

1991 dakota intermittently stalls or will not start after being run for 30 minutes or more of running.


When it does this you need to check if you have voltage ( spark ) going to the end of the spark plug wire, but it sound to me like your pick up coil is going bad, pick up coil sit under the distributor cap under the distributor rotor same size as distributor assembly ( black ) cheap$$, good luck, hope this was very helpful.

May 14, 2010 | 1991 Dodge Dakota

1 Answer

REPLACED FUEL PUMP UNIT CRANKS TAKES ABOUT 10


upper 02 sensor run on a loop till the engine gets warm then it reads the sensor get you back on the road fast it will work better if the engine is warm when you take out the o2 sensor

May 04, 2010 | 2001 Dodge Durango

1 Answer

My 2006 Dodge Magnum hesitates sometimes while in


I had the same problem. I replaced the crank shaft position sensor and it solved my problem. It would stall at intersections and while under light acceleration. It also caused loss of cruise control and a stutter when at highway speeds. Replaced crank sensor and its been running solid for 5,000 miles. $125 fix self installed.

May 03, 2010 | 2006 Dodge Magnum

1 Answer

Need diagram for firing order to a 2000 Dodge Durango Magnum,4.7


I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.

For the 4.7L:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
8----------7
6----------5
4----------3
2----------1
(Front of Vehicle)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 01, 2010 | 2000 Dodge Durango

1 Answer

Dodge durango Engine cut's off


Try replacing the fuel filter.

Jun 12, 2009 | 2000 Dodge Durango

1 Answer

1999 dodge durango v-8 magnum oil has caked up inside motor


Common problem with these engines. Probably has a slight coolant leak at a head gasket causing this problem. Recommend to install reman engine you will save time and money compared to overhauling existing.

Mar 29, 2009 | 1999 Dodge Durango

2 Answers

Engine sounds like its working hard


if it does it then stops then sounds like your fan clutch working and is normal

Aug 17, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...