Question about 2000 Chrysler Concorde

1 Answer

Need to replace a serpentine belt on a 2000 Chrysler Concorde, 3.2 engine. Any suggestions?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 117 Answers

Uhmmmm. suggestions for what??? usually there is a diagram on the hood or the vehicle that shows where the belt has to go. you follow that picture. as for removing/installing the new belt, you will have to use a breaker bar or long handled wratched to slack off the tensioner. the 3/8" wratchet head will fit into a slot on the tensioner bracket (usually) and you just GENTLY pull on it to release the tension to get the belt on. hope this helps, good luck

Posted on May 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace the waterpump 2000 chrysler concorde engine 2.7. Doe the timeing belt need to be readjusted?

The 2.7 L is a chain driven DOHC engine. No belt. Chain should last the life of the engine.
The 2.7 also has a "bad reputation" for going bad - but this is in almost all cases due to the oil change intervals. Change oil every 5,000 miles and sludge won't build up. Don't change the oil and about 15,000 to 25,000 miles later, <boom> bye bye engine.
Not sure where the water pump is. Never had to replace one yet.

Nov 04, 2011 | 2000 Chrysler Concorde

1 Answer

2.7 2000 concorde still running funny after putting new crankshaft and cam sensors on it.Idles funny and engine seems to hesitate for a second when accelerating.Almost like engine cuts out for a...

Sounds like the timing belts needs to be replaced and it is a real pain on those cars best to do the water pump also. I suggest a really good mechanic do the work though. It took me about 8 labor hours to do this.

Jun 19, 2011 | 2000 Chrysler Concorde

2 Answers

How do change serpentine, and ac belt on 3.2 ,2001 chrysler concorde. do i loosen nut on tension pully. It is really tight. then how does it looosen to remove belt

Beside the pulley on the arm it is mounted on is a square hole. Place a 1/2 drive breaker bar in that hole and push to right or left. One way will looken the belt. It is a very heavy spring so don't do it till you have the belt to replace with.

May 28, 2011 | 1999 Chrysler Concorde

1 Answer

Have a 2000 Chrysler Concorde 2.7L engine need to know how to ID the #3 ignition coil

I'd suggest picking up a Chilton's Manual,for your
particular vehicle. They can be found at any parts store,and have a wealth of knowledge.

Apr 01, 2010 | 2000 Chrysler Concorde

1 Answer

Where can i find a diagram for installing a serpentine belt on a 94 chrysler concorde?

if you purchase your belt from Autozone the belt routing will be on the package.

Jan 03, 2010 | 1994 Chrysler Concorde

2 Answers

Which cylynder is the number 1 on a 1999 chrysler 300m? I need to change the #2 fuel injector and don't know which cylinder is which

Cylinder #1 is on the right bank of the engine. So if you are looking at the front of the engine(where the serpentine belt is) it will be on the left. The right bank is the firewall side of the engine.

Dec 16, 2009 | 1997 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340

P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

May 29, 2009 | 2000 Chrysler Concorde

1 Answer

Change serpentine belt on 2000 3.2 L Concorde?

undo the belt tensioner.  It's a pulley with a spring inside. 

Mar 16, 2009 | 2000 Chrysler Concorde

1 Answer

How many serpentine belts does a 1999 chrysler concorde have?

Here is a link to images of what the engine looks like..,2536902/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152801d4a55

It seems to have a serpentine belt and an A/C Drive belt.

Hope this helps

Dec 24, 2008 | Chrysler Concorde Cars & Trucks

Not finding what you are looking for?
2000 Chrysler Concorde Logo

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides