Question about 2000 Chevrolet S-10

1 Answer

In my 86 chevy s10 i blow a fuse in the same spot every time i turn on my lights and then the rear running lights (not brake lights) stop working im tired of getting pulled over so how do i find the short in the system? (p.s. i bought the thing used and the electrical system is real wonky)

Posted by on

Ad

1 Answer

You need to own a VOM Meter and know how to use it.
You need basic electrical knowledge
I would suggest buying a factory wiring diagram,only if you can read one. Otherwise,just get an estimate, at a repair shop

Posted on May 29, 2010

Testimonial: "cant afford a shop but a chilton will help"

  • Anonymous May 29, 2010

    Helm.com--for wiring shop manual
    check prices,I don't personally believe chilton will help you,it is too generic

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The 20 amp stop/haz fuse keeps blowing. I put a new one in but after using the brakes 18 to 24 times the fuse is blown. I noticed that the fus/circuit breaker box under the hood does not have a brake lamp...


Not easy to diagnose. Most probable cause is an intermittent short in the power wiring between the hazard module under the dash and the brake and center stop lights, or a problem with either that module or brake light switch on the pedal. I would start by inspecting the socket wiring and interior of the sockets on the rear light modules.

Jul 13, 2017 | 1997 Chevrolet Suburban

2 Answers

Need a wiring diagram for a chevy s10. brake


your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Nov 24, 2009 | 1997 Chevrolet S-10 Pickup

3 Answers

1992 chevy s10 no brake lights or turn signals


Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Aug 02, 2009 | 1992 Chevrolet S-10

1 Answer

I have a 1990 chevy s10,all my lights work except my brake lights


Do you have power with a test light in and out of the switch? Do the turn signals work? Will the brake lights work if you play with the turn signal handle?

May 06, 2009 | 1990 Chevrolet S 10 4WD

2 Answers

Fuse blows when shift in reverse


Am I correct, the turn signal fuse is blowing when you put the manual shifter in reverse?
Let me know.
Regards

Mar 26, 2009 | 1999 Chevrolet Tracker

1 Answer

No brake or turn signals the fuse blows


what about the sockets of the lights are they rusted in the contact spot and touching the 2 positive connections

Mar 03, 2009 | 1999 Chevrolet Suburban

5 Answers

Chevy s10 brake lights


If the problem is that the brake lights will not turn off, the problem is most likely the CHMSL relay. An easy check is to take the cover off the fuse block mounted on the driver's side fender well and swap the fog lamp relay with the CHMSL relay. If that fixes it, just get a new relay for the fog lamps and you're good to go. Note, my 2002 s10 does not have fog lamps, but it still had the relay populated in the fuse block.

Jul 25, 2008 | 2001 Chevrolet S-10

7 Answers

No rear brake light / turn signals on 2001 Chevy Cavalier


The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores

Jul 05, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...