Question about Jeep Grand Cherokee

1 Answer

Steering wheel starts shaking when brakes are applied.1999 Jeep Grand Cherokee Laredo 6 cylinder

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Hi,
How many miles are on the vehicle? Most times when this occurs this is due to warped rotors. When is the last time the brakes were serviced as in how many miles ago? If only the pad's were changed then the rotors may need to be turned down or replaced. Also look for uneven wear in the pads as your calipers may need replacement as well. If you have any other questions let me know.
Thank you,
Lee

Posted on May 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fireing order diagram


cylinder firing order is: is 1-5-3-6-2-4 .... In Jeep Grand Cherokee Laredo ...Happy motoring.

Sep 04, 2014 | 1996 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherokee laredo v6 4x4 won't fire on all 6 cylinders just 4 why?


Plenty of causes. Plugs, valves. rings, numerous electronic/electrical faults. Diagnose vehicle and eliminate problems one by one.

Oct 30, 2012 | 1999 Jeep Grand Cherokee

1 Answer

1999 Jeep-violent shaking of steering wheel when braking at 55 mph and then stops when speed lowers to say 40 mph. Only on highway, not streets. When first happened, installed new rotors and brakes, but...


1. out of balance tire because it sounds speed spacific.
2. worst of all! Loose lug nuts or possibly loose spindle nut. (you will need to lift the wheel off the ground to tell)
3. worn linkages i.e. ball joints, steering linkage, anything that would allow play in the front wheels.

Nov 08, 2010 | 1999 Jeep Grand Cherokee

2 Answers

Jeep 4.0 firing order


1999 Jeep Cherokee 4WD 4.0 liter L6 VIN "S"

71cf96f.gif

Hope this helps (remember rated this).

Aug 09, 2010 | 1998 Jeep Cherokee

3 Answers

Jeep grand cherokee larado 1999 going above 50


sounds like it time to have the front end balljoints inspected. Only with an inspection will you get the proper results. Why guess, this is a safety issue.

Jul 23, 2010 | 1999 Jeep Grand Cherokee

1 Answer

Need firing order for 1998 Jeep Cherokee gand


For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6

8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 28, 2010 | 1998 Jeep Grand Cherokee

1 Answer

How to install a brake light switch on a Grand Jeep Cherokee


Dont do it... It will take you bout 30 minutes to remove and replace it on the steering column

Dec 04, 2009 | 2001 Jeep Grand Cherokee

2 Answers

My wife's 2002 Jeep Grand Cherokee Laredo starts shaking when the car is turned on. The sound of the car is different, almost like put put put kind of sound instead of a normal smooth engine sound. When I...


You probably have a dead cylinder. like if you have a six cylinder it might be running on only five. could be because of a bad spark plug, ignition coil, fuel injector, plug wire. you should get it checked out.

Nov 03, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Horn, cruise control, and radio controls on steering wheel do not work ?


The clockspring behind the steering wheel is possibly defective or unplugged. It is the one and only component that all of your symptoms have in common.

Apr 27, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...