Question about 2000 Lincoln Navigator

1 Answer

Truck has new battery its about 4 months old power widows work headlights are brite but when i turn it over it will only click and the click is coming from the starter silanoid

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

It sounds like you have a bad starter, the solenoid is working, but the starter is not turning.

Posted on May 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turns over but won't start


I would start checking fuses for power. It could be a battery cable issue or something in the fuse box. The dash lights would not be powered thru the key switch, but the other stuff would be. Provided the key switch is getting power for accessories.

Feb 23, 2014 | Dodge Cars & Trucks

1 Answer

I got an issue that I'm stumped on. here is the


By shorting out the neg and pos terminals of the battery for 10 minutes you have flattened the battery and may have damaged a cell and plates in a cell. You should have got a massive spark and if you didn't then the battery is not all that good. Just because the battery is new does not mean that it is not faulty. That is why there is a warranty on the battery. You reset the cpu by the use of a code reader as the cpu needs to be reprogrammed to reset.. You keep saying like it is getting little or no power . Do a load test on the battery and you may find that it fails under load

Sep 14, 2013 | Cars & Trucks

2 Answers

Car won't start


Anything is possible, but I doubt the new battery has failed.
Chances are the alternator is not charging the battery.
The alternator should be able to power the headlights and engine once it starts.
You also need to know why the battery went dead overnight.

Feb 01, 2013 | 2007 Mazda 3

1 Answer

Will a weak battery cause a new starter relay to just click, and not turn the starter over?


Have the battery tested but this is the wrong product selection for this product.

Jul 06, 2012 | Cars & Trucks

2 Answers

1990 oldsmobile silhouette wont start


Even though the lights work the battery should be load tested to see if it can handle a heavy amp. draw like the starter.If you have a battery charger, but it on the battery and leave it for a few hours.Also check the battery connections to be sure they are clean. If it starts check to make sure the alternators is chargeing the battery.

Sep 03, 2009 | 1990 Oldsmobile Silhouette

1 Answer

My 1992 Corolla DX headlights won't come on! I have changed the fuses and the bulbs. The relay clicks when turning the switch and the wiring seems to be in good condition but I am no electrician. The...


Power flows from the battery to the main fuse. Then it flows to the control coil and contact side of the headlight relay. When you turn on the headlights, the headlight switch provides ground to the control coil in the headlight relay and that operates the contacts. The contacts allow power to flow to the right and left hand headlight fuses. Power flows to the headlights. The headlight switch is what provides ground to the high and low beams on the headlights.

To diagnose, remove the headlight relay. Using a voltmeter, check for battery voltage on terminals 3 & 4 in the socket with the key in the RUN position. Then turn on the low beams. Test for good ground on terminal 1 in the socket. If you're not getting ground, then you've got a problem with either a bad headlight combo switch or a bad ground. If you get good ground on terminal 1, reinstall the relay, turn on the low beams and test for power in the headlight sockets. If you get battery voltage, that confirms you've got good fuses and wiring up to that point. Next, check for good low beam ground on the red/green wire in the bulb socket. If you're not getting good ground, it's either a bad combo switch or bad ground from the combo switch. Then turn on the high beams and check for good ground on the red/yellow wire in the bulb sockets.

It wouldn't hurt to clean the ID ground on the left side of the instrument panel, but based on everything you've said so far, this sounds like a bad combo switch

Jul 26, 2017 | 1992 Toyota Corolla

2 Answers

Electrical Drain


CHECK THAT YOU HAVE AGOOD POWER FEED TO ALTERNATOR AND A VERY GOOD EARH HAD ONE A FEW MONTHS AGO IN SAME FAULT WAS APOOR EARTH TO ALTERNATOR.

Jan 11, 2009 | 1999 Land Rover Discovery

Not finding what you are looking for?
2000 Lincoln Navigator Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

fordexpert

Level 3 Expert

5687 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...