Question about 1992 Hyundai Excel
Ok it is turning over but will not crank up
out of gas
or need a new motor
you have to explain more of what is going on
Posted on May 28, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: No crank, no start, new battery
I've ha the same problem on my 95 civic. Changed the starter, a relay, checked the ignition switch, distributor... and found it was a faulty ground from engine to engine compartment. To check this last solution, simply attach a wire big enough between the engine and chassis and turn the ignition key. If the car starts, you've found your problem!
Hope this can help.
Posted on Aug 24, 2008
SOURCE: engine cranks car won't start
Sorry..... 1 notch off is just not good enough. It has to be exact , then if it doesn't run start looking at other posibilities.
Remember that the camshaft turns twice eash time the crank turns once. The distributor rotor works off a gear on the cam.
Your rotor could be off a bit , or it could look exactly perfect the way it was when tou took it out , and still be 180 degrees off.
You have to get your engine to "top dead center" and make sure everything is the way it should be.
A timing chain ( or belt ) can cause permanent and fatal damage to the valve train and pistons in motors that are "interference engines" Find out weather yours is. In a non-interference engine , the clearance between the valves and the pistons is large enough to alow them to move out of time without crashing into each other. An interference engine is not so forgiving.
The fact that your engine cranks makes me hopefull that it is a non interference engine , and that damage has not been done.
Try to find a haynes manual for you vehicle , it will walk you through the steps for most repairs.
Posted on May 10, 2009
Tips for a great answer:
May 06, 2015 | 2001 Pontiac Grand Prix
Dec 30, 2014 | 2002 Saturn S-Series
Apr 05, 2014 | Jeep Compass Cars & Trucks
Jan 28, 2014 | Cars & Trucks
Dec 09, 2013 | 1996 Chevrolet S-10 Pickup
Feb 20, 2013 | 2000 Nissan Maxima
Jul 14, 2012 | 1985 Dodge Ram 50
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: