Question about 2005 Mazda MPV

1 Answer

How do I change spark plugs on a 2005 Mazda MPV 3.0 liter engine?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

I just changed plugs on my 05' you have to remove the intake plentum to gain acsess to the rear plugs. First remove plastic cover from top of engine, remove intake hose to throtle body, unplug electrical connections to sensors on plentum, unhook vaccum lines, there are two coolant lines that need to unhooked from underneth throttle body, remove plentum support bolts, one on back and one on right side towards rear, a flash light and a mirror is useful for locating these bolts, there is also two vaccumn lines on the very back off plentum that have to be removed. remove clip on back off plentum that secures the hose that goes across the side of the plentum. Remove the six hold down bolts on plentum, and remove plentum. Spark plugs are acsessed by removing the coil packs for each cylinder, simply remove each coil pack hold down bolt and remove coil, plugs are underneth coil packs, you will need a long extension and a 5/8 spark plug socket to remove plugs.

Posted on Jun 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a mazda mpv 2000 minivan.problem code p0301 misfire detected cylinder#1


I'd check #1 spark plug.
Usually a misfire code "fix" is a spark plug, spark plug wire, or a coil pack / distributor.
Keeping it simple...I'd go with the spark plug first and then look at the condition of the wires.

Hope this helps...

Aug 28, 2011 | 2005 Mazda MPV

1 Answer

Which cylinder is #3 on a 2005 Mazda MPV?


Check this diagram for Mazda MPV 3.0 liter DOHC V-6

zjlimited_97.gif


Hope helps (remember to rate this answer).

Jan 05, 2011 | Mazda MPV Cars & Trucks

1 Answer

Where can i find the spark plugs on a 2004 mazda mpv?


Changing the plugs on the 04 MPV is a pain.

The front three plugs are easy to get to - just remove the black plastic cover over the engin block(3 screws) and they're right there (but deeply recessed in the block).

But you have to remove the manifold to get to the back three plugs. and this kinda sucks. you will need a new manifold gasket set also....... I hope this helps

Nov 28, 2010 | 2004 Mazda MPV

1 Answer

I need a picture of the spark wire cables


1993 Mazda MPV 2.6 liter SOHC L4

fc748e8.gif


1993 Mazda MPV 4WD 3.0 liter DOHC V-6

eecb130.gif


Hope helps (remember to rate and comment this):

Sep 27, 2010 | 1993 Mazda MPV

2 Answers

What could be the cause of a p0304 code on my 2005 mazda mpv. the check engine light is blinking


Cylinder 4 is misfiring. Take it to a mechanic and have them take a look at it. Im guessing its the distributor, Spark plug, or spark plug wire on cylinder 4

Dec 09, 2009 | 2005 Mazda MPV

1 Answer

Where are spark plugs located on 2005 Mazda MPV


go to the link, the engine is the right one, the model is different but the procedures are the sam, there are good photo's of the job in progress.

http://www.imazda.com/forums/showthread.php?t=3059

Nov 12, 2009 | 2005 Mazda MPV

1 Answer

Which is the #1 plug for firing order located to do a timing setting


You don't have your engine size posted so pick the applicable application:

1989 Mazda MPV
2.6 liter SOHC L4
cf032e2.gif
1989 Mazda MPV 2WD
3.0 liter DOHC V-6
cb46576.gif

Jul 15, 2009 | 1989 Mazda MPV

4 Answers

I need to change the 3 rear sparkplugs on my mazda mpv v6 engine?


How can I take the manifold out to change my spark plugs, in 2005 mazda mpv?

Jan 14, 2009 | 2000 Mazda MPV

Not finding what you are looking for?
2005 Mazda MPV Logo

2,841 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...