you just get this car.
or it worked before but not now? key questions.
door switch driver and RKE not working right.
and some cars the driver has a master switch and local switch.
and some have a kids safe switch that kills the other doors.
i dont have the opr,guides. for liberties.
in this case , this is a programmable feature
. most newer jeeps.
you can program most cars. for (only driver door works with fob)
this is for security, (like airport parking , alone, at night)
the operators guide (lost already )covers this. in the glove box.
most folks don't read it ,they just drive to jeep service and
ask to have it set like you want. and pay $100.
it could be a fault too... but that will take checking above first.
on my other car, i must click 2 times to open all doors, (GM)
the dealer will scan the PCM/BCM puters. to see if they are throwing
DTC errors. any good scan tool can do this.
and check fuses first. never last. or get egg in face.
did you read this?
lost it , then get it and put it on a flash stick and put it back in the glove box or burn a CD . (or kill a tree and print it)
To Unlock the Doors and Liftgate
Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver's door or twice to
unlock all doors and the liftgate. The turn signal lights
will flash to acknowledge the unlock signal. The illuminated
entry system will also turn on.
Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either
the driver's door or all doors and the liftgate on the first
press of the UNLOCK button on the RKE transmitter. To
change the current setting, proceed as follows:
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to "Remote Key
Unlock," under "Personal Settings (Customer-
Programmable Features)," under "Electronic Vehicle
Information Center (EVIC)" in Section 4.
my GUESS, you didnt RTM.