Automatic door locks don't work on a 2000 ford focus

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

SOURCE: Central Locking to Ford Focus LX 2001

Problem with 2001 1.6 Focus which i was going to purchase for the wife, but problem with central locking! key fob totally dead even when i tried the reprogramming trick (key in ignition press button several times) and when locking/unlocking manually, central locking only working intermittently! Please help regards steve

Posted on May 30, 2009

SOURCE: central locking on Ford focus 1.4 W reg 2000

hi i would start by checking if there is a relay, it seems that there is a delay on the pressure pump that is supposed to shoot the door pins up.

Posted on Feb 05, 2009

SOURCE: 1999 - 2000 ford winstar sel power locks very

you need to take the door apart.maybe something jamming it.
if not it is a new regulator is why they said call the junkyard because they are very expensive

Posted on May 31, 2009

SOURCE: 2000 Ford Focus automatic door locks quit working.

check fuse 63 first.

Visual Inspection Chart Mechanical Electrical

• Binding latch mechanisms
• Binding linkage
• Misaligned door

• Central junction box fuse 63 (20A)
• Damaged wiring harness
• Loose or corroded connection(s)
• Circuit
• Door lock switch
• Door lock actuator

Posted on Jun 23, 2009

Daniel Dollive

• 309 Answers

SOURCE: i have a 2006 ford focus and my back door

sounds like the fuse that controls that switch has burned out. check your fuse panel and refer to either the manual. or to the cove for fuse location info. good luck.

also note if the fuse blows again then the problem might be related to a bad switch or a short condition ion the wire.

Posted on Oct 01, 2009