Question about 1990 Nissan 300ZX

1 Answer

My 1993 Nissan 300ZX won't shift into gear, I'm stuck in neutral. What might cause this and how much would it cost to repair?

Posted by on

  • quent2 Jul 07, 2010

    I have a 1990 Nissan 300 zx coupe. My clutch pedal sticks to the floor so I can't shift the car in gear. It doesn't rises back up. I changed the master cylinder and also tried to bleed the lines. Still the clutch pedal wont tighten. Need some help.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

Hi and welcome to FixYa. I am Kelly.

Check to see if your brake lights are working. Chances are the brake pedal switch could be bad. Also there is a solenoid in the center console that is activated by the brake pedal switch. Either one of them can cause the problem. I do not know the cost as a dealer would charge you at least $75.00 plus parts to fix it. A regular repair shop may charge less depending on the actual time it took to troubleshoot and replace parts.

Posted on May 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 nissan 300zx auto not shifting?


you might have to change your strainer and fluids

Feb 06, 2013 | 1990 Nissan 300ZX

1 Answer

Nissan sentra 1993 wont ship transmision stuck on 2nd gear


If second gear stuck it need rebuilt ore replaced.
check what labor to rip one out replace a junk yard one ore check see what cost rebuilt it.
stay away form amco there rip off artist.
Your cost about 900 to 1000/.
if you do your self 600 for junk yard one and few hundread if you can get rebuild kit rebuild the trasmission your self.
I took trans rebuilt i rather buy used ore pay some rebuild it.
Give thumbs up if that help seya

Aug 18, 2009 | 1993 Nissan Sentra 4 Door

1 Answer

Hi I havw question how many gears have 1991 nissan 300 zx tt automatic and when at chenging gears (rev) I heard around 4000rpm.


300zx auto will have 4 gears. 1-3 are normal running gears 4th is said to be an "overdrive" gear.

shift points should be under 4krpm, with light driving. my 300zx non-turbo usually shifts around 2-3K.

throttle position sensor could need adjustment or replacement. trans fluid should be checked to see if it's in good shape and full.

Jun 21, 2009 | 1991 Nissan 300ZX

1 Answer

1988 Nissan 300zx shifts real hard or not at all


you may have a weak clutch master cylinder

May 06, 2009 | 1987 Nissan 300ZX

1 Answer

1990 Nissan 300zx w/ shifting issue


well Im sure theres a ton of miles on it-do u perform reg maint like checkin fluid level-u may need the throttle cable ajusted that hooks to trans-band n clutch could be out of measure too--trans hydra-valve system could be worn--see all these things effect the way the fluid makes the gears move--a pressure test can confirm an aging trans

Apr 03, 2009 | 1990 Nissan 300ZX

1 Answer

300Zx will not shift out of 5th gear


is there any pedal pressure when you step on the clutch? I had a similiar problem with my 91 300zx tt....it was stuck in third gear, no pedal pressure on the clutch whatsoever....i had cracked the pivot ball and the clutch slave 'popped out'. i had to pull the trans to fx the problem because i could not reattach the clutch fork onto the release bearing with the trans in the vehicle....you need to bleed the system...gravity bleed the slave until there are no air bubbles. make sure you top off the clutch master cylinder in the process.....then bleed the clutch operating cylinder.....it is in the passenger front hood near the power steering resivoir....top off the clutch master cylinder again. i hope this helps.

Apr 03, 2009 | 1990 Nissan 300ZX

2 Answers

1990 300zx 2+2 Non Turbo


That means the transmission is going into Limp mode - something's wrong that is making the car believe it can be damaged by the speeds the upper gears will allow you to reach. For starters, check the fluid level (or just change it - it's not a bad idea), and disconnect the battery for an hour or so to put the ECU into relearn mode - this will clear current fault codes and allow you a fresh start to see if the condition reappears, or if it was a fluke failure of some part that caused the car to repeatedly go into limp mode.

Sep 07, 2008 | 1990 Nissan 300ZX

Not finding what you are looking for?
1990 Nissan 300ZX Logo

647 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...