Question about 2000 Mercury Sable

1 Answer

What is the fuel pressure for a 1996 mercury sable?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 17,970 Answers

what is the fuel pressure for a 1996 mercury - c8f0146.jpg

Fig. 1: Fuel pressure regulator exploded view

CAUTION Observe all applicable safety precautions when working around fuel. Whenever servicing the fuel system, always work in a well ventilated area. Do not allow fuel spray or vapors to come in contact with a spark or open flame. Keep a dry chemical fire extinguisher near the work area. Always keep fuel in a container specifically designed for fuel storage; also, always properly seal fuel containers to avoid the possibility of fire or explosion.

  1. Disconnect the negative battery cable.
  2. Properly relieve the fuel system pressure.
  3. Remove the air cleaner outlet tube(s).
  4. Remove any necessary components to access the pressure regulator.
  5. Disconnect the vacuum hose from the pressure regulator.
5cbce7e.jpg
  1. Remove the pressure regulator atwhat is the fuel pressure for a 1996 mercury - 548c606.jpgews.
548c606.jpg


  1. To install:
    Discard the O-rings on the pressure regulator and replace them with new ones.
0f4e232.jpg
  1. Lubricate the O-rings with clean engine oil.
0719c6e.jpg
  1. Install the regulator into the fuel rail and tighten the retaining screws.
  2. Connect the vacuum hose to the regulator.
  3. Install any components removed to access the regulator.
  4. Install the air cleaner outlet tube(s).
  5. Connect the negative battery cable.

Hope help with this (remember rated this).

Posted on May 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is ignition module for 1996 mercury sable


call a ford dealer they are same type .

Apr 12, 2015 | 1996 Mercury Sable

1 Answer

Mercury sable 1996 changed fuel filter had brown gas in it did this ruin fuel pump. Can hear pump when trying to start car


Most likely the fuel pump is ok, but there is likely air in the fuel line that you need to bleed off under the hood.

It is possible that the fuel pump went bad, and the way to know is to check the fuel pressure (same place you bleed it under the hood). The fuel pump is in the tank, so it's a real pain to change.

Apr 12, 2015 | 1996 Mercury Sable

1 Answer

Why is my 1996 mercury sable not starting?


Can be out of gas, blown fuel pump fuse or injector link, defective fuel pump relay, broken wire, or of course defective fuel pump. Or a number of other defective relays or switches. Or possibly the problem is in the electronics, NO spark to the plugs. First check for spark, then test fuel pressure at the engine intake area.

Jun 21, 2014 | 2002 Mercury Sable

1 Answer

What is the component atached to the underside of the spare tire well on my 1996 Mercury Sable? It has 3 tubes runing to or from it. 1 is rubber and 2 are metal. The brackets that held it up rusted thur...


MERCURY SABLE , manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . AT HIGHWAY SPEEDS, VEHICLE SWAYS AND VEERS EXCESSIVELY IN MODERATE CROSSWINDS. *AK.Vehicle Identification Number (VIN):1MEHM55S31A. MERCURY SABLE 2001 problem was reported in ANDOVER, MA. Original Owner. Vehicle was purchased on 20000901. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.MERCURY SABLE 2001 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.

May 25, 2011 | 1996 Mercury Sable

1 Answer

I have a 1995 Mercury Sable. I'm thinking it needs a fuel pressure regulator. What would the vehicle do if it needed this part?


It would not supply the injectors the correct fuel pressure
and you would have what is called, drivability issues

Have the fuel pressure checked,regulators are not
a common failure on most fords

Nov 29, 2010 | 1995 Mercury Sable

2 Answers

Where is the fuel filter on a 1996 mercury sable v6


the fuel filter is located on the right side frame rail near the corner of the fuel tank.

Jul 21, 2010 | 1996 Mercury Sable

1 Answer

The engine cranks but will not start also where is the fule filter and the fule pump on my 1996 mercury sable?


The fuel filter is on the passenger side of the car back close to the rear wheel, the fuel pump is inside the fuel tank.

Apr 03, 2010 | 1996 Mercury Sable

1 Answer

My 2001 mercury sable need to cycle the key a few times to start


Check/ or replace the fuel filter first .Fuel pressure should be 40-50 psi and hold steady for 30 seconds after the engine is off.

Oct 04, 2009 | 2001 Mercury Sable

1 Answer

1996 mercury sable dieseling sporatically


bad fuel injectors or dirty injectors if they are leaking it could do this

Jun 16, 2009 | 1996 Mercury Sable

Not finding what you are looking for?
2000 Mercury Sable Logo

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...