Question about 2006 Ford Mustang

1 Answer

How do i replace front pads; 2006 mustang v-6

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Jack up car and used jack stands, remove both caliper bolt's, you will need a c-clamp to compress caliper piston in, used one of the old brake pads in front of the piston then press piston in with c-clamp, install new pads and do the same at other side, before moving car pump brake peddle till it get's hard and your done,good luck.

Posted on May 28, 2010

  • pinger802 May 28, 2010

    thank you!

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 66 Answers

SOURCE: 2006 dodge ram 2500 4x4 diesel replace brake pads front and back

Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced front pads on 2006 gmc sierra now brakes go to floor at times


sounds as though there is air in the system get them bled to remove air then should be ok if not somthing worse going on

Aug 24, 2012 | 2006 GMC Sierra

1 Answer

What is the recommended miles to replace the timing belt on a 6 cylinder 2006 ford mustang?


mot auto parts stores will tell you 60k miles, reality is 100-120 max.
Best regards
Ck

Mar 06, 2011 | 2006 Ford Mustang

1 Answer

Need to replace the front brake pads on a 2006 scion tc coupe


front is as same as gm, 2 on caliper do not forget to press caliper pistons back into themselves, then just take pads out and replace then, install and start car and press on brake to bring pressure back into caliper

Jun 22, 2009 | 2006 Scion tC

1 Answer

2006 dodge ram 2500 4x4 diesel replace brake pads front and back


Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.

Apr 25, 2009 | 2004 Dodge Ram 2500

1 Answer

I need an online guide on replace brakes in 2006 Mustang


What aboout the brakes do you need replacing? Just the pads or pads and rotors? I will help you work this out just let me know if you get stuck. Picture manuals are only as good as the mechanic taking the picture, i however need no manual to assist you.

Apr 10, 2009 | 2006 Ford Mustang

2 Answers

97 mustang gt running threw rear brake pads


how many miles are u getting on a set of brake pads before they wear out? Have u flushed out the lines? Contaminated brake fluid can ruin the calipers, causing internal corrosion which in turn causes the caliper to drag and burn out the pads prematurely. The strange thing w/ this theory, is the fact that it's just one wheel. I would try bleeding all the lines though, to make sure u have bled all old fluid, and replaced it w/ new. Has the mustang ever been in an accident? Just wondering if caliper mounting bracket is tweeked, or some other component that the brake system is mounted to. Let me know if this is any help, and if not, if u have any more clues that might help figure this out. Good Luck

Nov 07, 2008 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

Rear Brakes


Brakes can vary in the amount of time that they last. For starters there are many diffrent grades of pads, the cheap pads last me about a month, but the good expensive pads last me 6-8months or so, and I drive really hard. So depending on how drive can determine how long they last. Usually you can replace your rear pads once for every two or three sets of front pads you replace as most of the braking work is done from the front. Pads are made intentionally to squeak when they are running down, so when you hear that squeak get em replaced, but if the rear's aren't squeaking just change the front and do the rears next time.

Good Luck
Hope this help

Jun 26, 2008 | 2006 BMW L7

Not finding what you are looking for?
2006 Ford Mustang Logo

Related Topics:

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...