Question about 1998 Chevrolet Blazer

1 Answer

Differential bearing on the front how to I take it

I have a 1998 s10 Blazer. I need to replacedifferential bearing on the front How to I take it out?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

What part do you want to take out? if it's the pinion bearing you have to remove the driveline remove the pinion nut pull the yoke off pull axles out and remove bolts to get to the inner bearings and the 3rd member bearing cap 2 bolts on each side.

Posted on May 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 chevy s10 blazer drive shaft only turns to the left when engine is off and in neutral


Front drive shaft? Look to the front differential. Rear shaft shouldn't turn at all on the ground. Then look at the T case.

Sep 03, 2016 | 1994 Chevrolet S-10 Blazer

1 Answer

Flat tow or dolly towing for an 2000 S10 Chevy Blazer


If you dolly it you put wear on the wheel bearings and ring and pinion in the differentials on the front or rear depending on what axle you raise.

Mar 14, 2015 | 2000 Chevrolet Blazer

2 Answers

Have a 1985 chevy s10 pick up & the 4 wheel drive wont engage. I already replaced the solenoid on top of the transfer case, & it still wont engage. I can hear the transfer case engage & I have vacum at the...


Make sure that the vacuum hose connector is connected AND connected correctly at the transfer case and at the front differential. If that is all right and the front differential still doesn't engage, then you need to test the vacuum actuator at the front differential.

Oct 25, 2013 | 1985 Chevrolet S-10 Blazer

1 Answer

Need torque specs for 1999 chevy s10 blazer rear differential bearing caps 4wd 4.3


still looking for you answer but i found this useful bit of info to add to you knowledge complete with specs, diagrams and drawings and pictures for all s10 models. http://h-body.org/dave/Build%20a%20Better%2010-bolt%20H-body%20Rear%20End.htm

Oct 24, 2010 | 1999 Chevrolet Blazer

1 Answer

I need a illustated view and step by step procedure on removing a differential front bearing on my 98 blazer 4 x 4


both pinion bearings are serviced as a whole, you buy them as a kit with seal and all, for directions go to autozone,chilton or mitchell on line

Aug 22, 2010 | 1998 Chevrolet Blazer

1 Answer

98 Blazer 4WD front axel falling out of differential


I would dismantle the axle, fit new thrust bearings and anything else that is worn/damaged and reassemble/adjust clearance gaps to it, according to the service manual.

Mar 12, 2017 | 1998 Chevrolet Blazer

1 Answer

Front diff growl in 2wd


This would be a failing bearing in the differential. More specificly, I would suspect the pinion bearing. The differential will need to be disassembled and all (4) bearings and bearing races inspected for wear/ pitting.

Mar 24, 2010 | 1997 Chevrolet Blazer

1 Answer

Front differential bearing


You do not need to remove it from the Truck for Repair. Just remember (Chalk the Wheels so it does not Roll!)

Jan 22, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...