Question about 2001 Ford Focus

1 Answer

01 focus,2.0 DOHC ZT,Crapping out under acceleration or under load on hills,Changed fuel pump,Checked for vaccuum leaks,No codes no light,I have a streaming reader and everthing appears to read right.I am perplexed with this one?can someone give me a hand,Seen this before?

Posted by on

1 Answer

Under a load or uphill,would suggest that a high vacuum signal was involved. So think EGR Valve. I know you got no codes. This is an exercise in logic.
A misfire will present it'self going up hill or loading the engine. e.g. hard on the gas
What has no sensor or won't set a code easily. Vacuum leaks,air filter,all air intake ducting,MAF Sensor,Throttle Position Sensor and don't forget those really small EVAP Leaks,most people never heard of.
Is the converter partially blocked?
O2 Sensors switching properly?
Fuel pressure,under a load? New fuel filter?

Posted on May 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power uphills


Have you checked base fuel pressure with a gauge ?

Feb 23, 2014 | 1993 Nissan Pickup

1 Answer

Continued fuel pressure problems in my 01, focus even after fuel pump and filter replacement


emissions vacuum controls leaking or throttle position sensor bad..

Dec 27, 2013 | 2001 Ford Focus

1 Answer

1997 Buick LaSabre 3.8 engine.


About the only thing that would make all 6 cylinders flood out is the fuel pressure regulator or a computer problem. You say you have checked the regulator, so the next step would be to check the injectors for a short to ground.

Jun 02, 2013 | 1997 Buick LeSabre

1 Answer

Engine misses while climbing hills or under acceleration load, 1997 Lincoln Continental, 4.6 ltr V8


i had same problem always try easiest/cheapest first A. fuel filter B. loose or cracked vaccuum line C. cap and rotor D. have coil pack checked. if youve ran the car low on gas recently the fuel pump filter may have picked up some trash. also instead of fuel injector cleaner get a bottle of heat for about two dollars it might be your gas.... stay away from gas containing ethanol it also has water pay the ten cents extra for non ethanol gas youll get way better gas milage which will make up for the extra cost at fill up and this will keep your injectors clean.. good luck

Sep 28, 2012 | 1997 Lincoln Continental

1 Answer

My ford v10 engines hesitates under load. It


1 Ignition system not operating properly
2 Dirtyor clogged fuel injector(s).
3 Low fuel pressure. Check for proper operation of the fuel pump and for restrictions in the fuel filter and lines.
4 Fuel injectionor engine control systems malfunction.
5 Vacuum leak at the intake manifold or vacuum hoses.
6 Restricted air filter.
7 Fuel pump or pressure regulator defective.

Dec 19, 2009 | 2000 Ford Excursion

2 Answers

1995 GMC Safari Loses Power when accelerating hard, rough idle


Do you have a check engine light on? Is this a 4.3 with central port injection? If it's running real rich it might have a fuel leak inside the intake, either a fuel pressure regulator leaking or a feed line to the injector.

Aug 23, 2009 | 1995 GMC Safari

1 Answer

Misfire on Cyl #2


How is your oil filter? It might be plugged...

Jun 01, 2009 | 2002 Mercury Sable

2 Answers

My sentra takes about 4mins to start in the morning.


Check the fuel system. make sure that the fuel filter is clean and working. Also check the choke settings. It seems that the choke is not engaging. try to press the accelerator all the way to the floor before starting the car.This will engage the choke. Then push it at least half the way down and try to start it. If not , the choke is the problem.

Feb 13, 2009 | 1996 Nissan Sentra

Not finding what you are looking for?
2001 Ford Focus Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...