Question about 1996 Plymouth Breeze

2 Answers

1996 plymouth breeze, leaking water pump. how

1996 plymouth breeze, leaking water pump. how difficult is the repair?? Thanks

Posted by on

  • Geoff Walton May 28, 2010

    this depends on your level of mechanical expertise - it is an internal water pump, meaning you will need to disassemble the timing components to service (this is also a good time to replace the timing belt, as it needs to come off anyways and the belt is relatively inexpensive). if your vehicle has the 2.4 liter engine, there is nothing very difficult about this timing belt. however, i tend to caution people about attempting this if they are inexperienced, as reassembling the timing components incorrectly can cost you and engine. good luck!

  • nosnw99 May 28, 2010

    thanks for the info.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 819 Answers

This depends on your level of mechanical expertise - it is an internal water pump, meaning you will need to disassemble the timing components to service (this is also a good time to replace the timing belt, as it needs to come off anyways and the belt is relatively inexpensive). if your vehicle has the 2.4 liter engine, there is nothing very difficult about this timing belt. however, i tend to caution people about attempting this if they are inexperienced, as reassembling the timing components incorrectly can cost you and engine. good luck!

Posted on May 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 645 Answers

It depends on the motor you have. auto zone or other will have a book that will give you step by step, however you will need air if possible because it is a long drawn out process if you do it by hand. it can be done.

Posted on May 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 plymouth neon water pump diagram


the water pump is in the front of motor which is standing on the passenger side of the car. send a picture of the belt with water pump12_16_2012_12_33_04_am.jpg

Dec 15, 2012 | Cars & Trucks

1 Answer

ECM FOR 1996 Plymouth breeze located


I would suggest a repair shop

If you can't find it ---you most likely don't
know it needs to be replaced & have done
no testing to find the real vehicle problems

You replace it & the vehicle won't start,then what?

Nov 29, 2012 | 1996 Plymouth Breeze

1 Answer

98 plymouth breeze leaking antifreeze


Water pump gasket most likely. or you did not ge the hose tight enough. Failing to get the pump gasket sealed is common.

Jul 10, 2012 | 1998 Plymouth Breeze

1 Answer

I am looking to locate the water pump on a 99 plymouth breeze


The water pump on both the 2.0 and 2.4 is behind the timing cover on the passenger side. The water pump is driven by the timing belt, and typically this is not a repair for the non-experienced mechanic. If the timing components are not aligned properly when reassembling, internal damage to the engine will occur.

Sep 04, 2011 | 1999 Plymouth Breeze

2 Answers

How do you access the radiator on a 2000 plymouth breeze? where is the radiator located ?


FOLLOW TOP AND BOTTOM RADIATOR HOSES THEY WILL LEAD YOU TO RADIATOR.YOU WILL HAVE TO REMOVE COOLING FAN TO REMOVE RADIATOR.

Jul 25, 2011 | 1999 Plymouth Breeze

2 Answers

I have a 2000 plymouth breeze an it keeps runing hot. But...the temp gauge isnt sayin anythinys wrong but i can hear an smell it running hot. My fans are working. The 1st guy said that it might be my...


Thanks for choosing FixYa and welcome to the site. They all are right. Anyone of those parts can cause overheating. The most common issue is the thermostat though, followed by the water pump. You could have a defective coolant sensor. If you have a bad head gasket, it will cause overheating. If you change the water pump, change the valve and the impeller also. Do this. Check your coolant level first and make sure it is level. You said fans are good. Make sure the radiator is good and is getting fluid inside it. Make sure there are no leaks. Check all coolant hoses. Like I said, the most common issue is a sticking thermostat or a bad one. Next, I would say the water pump.

Jun 07, 2011 | 2000 Plymouth Breeze

2 Answers

My 1996 Plymouth Breeze is stalling. I can press


Try changing the fuel filter. It may have been clogged. If this was at all helpful, please rate. Thanks for asking.

Jun 29, 2010 | 1996 Plymouth Breeze

2 Answers

Engine running rough at all times


sound like you cam to crank timing is off. if it was running ok before the repair double check the repair

Apr 13, 2009 | 1996 Plymouth Breeze

2 Answers

Antifreeze leak in a 1999 plymouth voyager. Lookslike its coming from around oil pan. Water pump replaced last year.Also no heat


check all hoses .from thermostat to radiator to water pump. check heater hoses.if all is good .make sure your water pump not leaking around the gasket area.if all is good.core plugs could be leaking.

Apr 12, 2009 | 1999 Plymouth Voyager

1 Answer

Oil pressure sending unit is leaking oil, what is the easiest way to replace it, 1996 plymouth breeze 2.0 liter


They make a special socket to fit those which you can get at an auto parts store along with a new unit.

Mar 25, 2009 | 1996 Plymouth Breeze

Not finding what you are looking for?
1996 Plymouth Breeze Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...