I will heare 3 beeps when I swing a corner or hit a bump, the same beep when you open the door,
some times the driver side door lock nob does not activate the other doors, also the tail gate will not open at times.
This is a p38 RR 1965 right hand drive. I will appreciate any assistance possible.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The horn should beep once. This tells you that you're now in programming mode.
Press the Unlock button, then press Lock again. The horn will beep once to tell you that Auto Lock was deactivated. It will beep twice if you're reactivating the system
There are many ways, I'm not sure which one will work on your car. I answered the two ways. I hope it works.
1. Open the driver's door and put the shifter in Park 2. Turn the ignition to On (II). 3. Press and hold the unlock side of the master lock switch for five seconds until you hear two clicks. 4. Within five seconds, turn the ignition to the Lock position.
Could be just a glitch. The BCM controls the beep through the radio. Thats why you hear for the speaker/drivers side. There are three possibilities for the beep. Door ajar with the key in the ignition, turn signal on too long, and seat belt unbuckled with the car running. Check for lights in the dash. no door ajar light, no seatbelt light. That could be the problem.
Sounds like the door latch is not closing all the way, Try spraying some WD40 into the latch in the door where it hits the striker post. Hold the door handle up and bump the door shut and open while holding the handle up on the out side several times, This should loosen the latch up and the door should close and latch. The more you spray and work the door the better it should get. If not the latching mechanisim may need replaced. I hope I have help you sovle the alarm problem.
When you change the battery on your key fob, sometimes you will have to reprogram it to your car's security system for it to function. Make sure your trunk and hood are closed along with all of the other doors, then get into the driver's seat and shut the driver's side door. Put your key into the ignition and click it into ACC mode which is to click it back one click. Wait momentarily until you hear a beep. Quickly now click it forward once and then back to ACC mode where you will then hear another beep.Now open the driver's side door and then shut it to hear the last beep signifying that you are now in Programming Mode.
Press and hold down both the lock and unlock buttons for fifteen seconds and listen for the beep which will signal that the fob has been programmed. Continue this for all existing and new fobs, you will be able to program four remotes to your Grand Prix and will have to do them all at once due to the memory being forgotten every time you enter Programming Mode. Once you have programmed all of the remotes and heard a beep for each one programmed, remove the key from the ignition to exit Programming Mode. You are now free to test your fobs and ensure that they all work.
Something similar to that was happening with our Odyssey...the beeping when you are driving whether it's ongoing or intermittent is the "safety alarm" letting you know the door is not closed. The power lock is not engaging. What I do when I get the beeping while driving is hit the Door Close button. It causes the door to attempt to engage again. To fix it...we first cleaned out the space below the side running board (kids were hiding crayons and things in there), then looked for any obstructions along the top and bottom tracks. I sprayed a lubricant along the tracks (I'd suggest the dry lube kind...I used WD40 the 1st time and had streaks of it dripping down after driving), use a lube that has a long straw to spray in small places...and spray up into the track that runs the length of the middle of the car. Manually open and shut it a few times to get the tracks lubed, then try it out. If you press the open OR close button by remote or in the car and get nothing...no movement/no noises/no beeping...then it could be the electrical circuit itself, the signal itself may be impeded...or the motor shot. Have you tried any of these suggestions before?