Question about 1999 Jaguar XK8

2 Answers

Drivers window will not close - 1999 Jaguar XK8

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 119 Answers

Here is my tip for you 4 factors involved in testing your window 1st need to check power to your switch 2nd your switch 3rd your motor and 4th your window rail make sure your window on the rail.good luck....

Posted on May 27, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jaguar Master
  • 76,848 Answers

When u try to close the window with the switch watch and see if the interior lights dim ever so slightly, if they do u need to replace the window lift motor for sure.

Posted on May 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 pontiac g6 drivers window, when handle is lifted the window does not drop the inch or so that it should.


The window indexing feature is used to lower the driver and passenger power windows approximately 4 mm when the door is opened. This is necessary to allow the top edge of the window to clear the window weather-strip. This feature will also raise the window to the fully seated position once the door is closed.
Is just the driver door not working ?
Observe the operation of the driver window and front passenger window while opening and closing their respective doors. The windows should index DOWN and UP when the doors are opened and closed.
? If either window does not index UP or DOWN, refer to Window Index Feature Malfunction.

Window Index Feature Malfunction
Ignition ON, observe the scan tool Driver Door Ajar Sw and Door Ajar Switch parameters while opening and closing the driver and passenger doors, the parameter should change from Door Closed to Door Ajar.
? If the parameter does not change when opening and closing the doors, refer to Door Ajar Indicator Malfunction .
Ignition OFF, disconnect the harness connector at the appropriate window motor.
Ignition ON, with the door closed, test for greater than 10 volts between the signal circuit terminal 5 and ground.
? If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
With the door open, test for less than 1 volt between the signal circuit terminal 5 and ground.
? If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the BCM.
If all circuits test normal, replace the window motor.

Your best bet mite be to take your vehicle to a qualified repair shop (GM dealer )

Nov 13, 2017 | Pontiac Cars & Trucks

1 Answer

My 2007 vw eos drivers window won.t close,all others works fine


Could be the master switch because the drivers window is mostly used, or the window motor/regulator. same reason. Easy to check with a volt/ohm meter. You'll need wiring/pin outs for electrical.

Sep 01, 2016 | 2007 Volkswagen Eos 2.0T

1 Answer

The window driver side switch is missing. Want to by pas plug to close the window


Try first to unplug the part "close" of the driver side switch (can be shorted and therefore permanently closes window) and then open window with "open" switch.

Mar 12, 2015 | Cars & Trucks

1 Answer

Driver's window does not close


You may need to change the window motor. According to a lemonade guide I had read, these are notorious, both driver and passenger, for going bad in the Tib. I had to change both of mine.

May 03, 2014 | 2003 Hyundai Tiburon

1 Answer

All 3 passenger windows will not roll down, but drivers window and moonroof open and close normally.


The child / safety window switch is ON . This switch is located in the driver´s window switch subpanel, in the door armrest, close to the remote mirror switches. Keep me posted

Jul 25, 2011 | 2007 Honda Accord Sedan

1 Answer

2006 Audi A6 Avant Drivers window control panel


Replace the switch. It has lost connection to the up position.

Sep 11, 2010 | 2006 Audi A6

1 Answer

1995 Honda Accord none of the passenger windows will openor close


turn off the window locks located in the driver side window controller. then let me know

Feb 03, 2009 | 1999 Honda Civic

2 Answers

Driver window works intermittently when closing


you need a new windo regulator assembly.

Jun 26, 2008 | 2001 Dodge Caravan

Not finding what you are looking for?
1999 Jaguar XK8 Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...