Question about 2000 Dodge Neon

1 Answer

2000 neon, timing belt tensioner. The old tensioner has a steel sleve spacer, the new one dose not. Has anybody had any prblems with that.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 22,095 Answers

Not really becaue i rarely change them i remove the seal and repack the bearing with grease ,but if it comes in teh kit for this model then it should be alright because its a copy part not the original so it would infringe copyrights if it was identical

Posted on May 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt


Did you install a new bushing with the tensioner? There is a bulletin that talks about brass powder on the old tensioner. If there is, install bushing no#JF01-12-754. It sounds like you put new timing belt tensioner and belt, but without the spacer, it could cause problems.

May 17, 2014 | 1997 Mazda MPV

1 Answer

I need a tensioner for my 2000 dodge neon cant find one


Timing belt tensioner at rockauto.com or a salvage yard some yards ship parts

Aug 25, 2011 | 2000 Dodge Neon

2 Answers

I NEED THE PROBLEM SOLVED ON 2001 DODGE NEON THE ALT BELT WONT STAY ON JUST A CLICK OR TWO AND IT COMES OFF COUPLE MONTHS AGO I REPLACED TIMING BELT HEAD GASKET AND VALVES IN HEAD WAS REPLACE PUT IT...


it sounds like you have a pulley alignment problem with one of the pulleys.did you have any left over washers or spacer not put back.the other problem is the belt tensioner may be worn and need replacing.these are the usual things that cause a belt coming off.if the belt is not on all the pulleys correctly it can throw a belt also.make sure there isn`t something(like a part of the timing cover)sometimes it doesn`t take much to cause this.

Apr 06, 2011 | 2001 Dodge Neon

2 Answers

Timing belt diagram for toyota corolla 2000 ae112


easiest way to change a timing belt is to
first slightly slacken off the belt tensioner
carefully cut the old belt in half along its entire length while it is still on the engine.
remove the outer half only.
place the new belt on the pulleys up against the inner half of the old belt.
cut and remove the inner half of the old belt.
push the new belt fully into place.
re tension the belt as specified.

Feb 20, 2011 | 2000 Toyota Corolla

1 Answer

I have to replace a serpentine belt and tension pulley in my 2000 plymouth neon can you help?


a serpentine belt tool is really needed to do this. you use the tool to move the tensioner to remove the belt. once you remove the belt there is a bolt in the center of the tensioner not on the pulley but the unit itself. unbolt this and you can remove the old one. the second belt should be replaced if your doing one. here is a picture to aid you. hope this helpsonetufshoppe_126.gif

Feb 15, 2011 | Plymouth Neon Cars & Trucks

1 Answer

Can you tell me where I can print instructions for free to help me change my timing belt in a 93 ford festiva


Here are the instructions for removing the timing cover, and for replacing the timing belt. If this is helpful, please click my accept button! Thanks!
Remove accessory drive belts.
  1. Remove water pump pulley to pump hub attaching bolts, then the pulley.
  2. Remove right inner fender panel to gain access to crankshaft pulley.
  3. Remove outer crankshaft pulley attaching bolts, then the outer stiffener/spacer and outer pulley
  4. Remove inner stiffener/spacer, attaching screws, inner pulley and baffle plate.
  5. Remove attaching bolts, then the upper and lower timing covers.
  6. Reverse procedure to install. When installing crankshaft pulley, ensure curved lip on baffle plate and deep recess of inner pulley face outward

8fb9fc4.gif
  1. Remove timing belt covers as outlined previously.
  2. Remove timing belt tensioner pulley attaching bolt, then the tensioner pulley, spring and spring cover
  3. If reusing old belt, mark direction of rotation on belt to aid installation.
  4. Remove timing belt from crankshaft and camshaft sprockets.
  5. Check crankshaft and camshaft sprockets, tensioner pulley and timing belt for wear or damage. Replace components as necessary.
  6. Align camshaft and crankshaft sprocket timing marks with marks on cylinder head and oil pump housing
  7. Install timing belt. If reusing old belt, ensure belt is installed so that direction of rotation mark made during removal is positioned correctly.
  8. Install spring and spring cover onto tensioner pulley, then install pulley and attaching bolt. Do not tighten bolt at this time.
  9. Install tensioner spring onto anchor, then tighten pulley attaching bolt to torque listed at the end of this section.
  10. Reinstall timing belt covers.

spacer.gif 2006-05-25_081817_fest2.thumb.gif
This photo shows timing marks.


59f76eb.gif

Jul 14, 2010 | 1993 Ford Festiva

1 Answer

How to replace tensioner pulley on 2000 Dodge Neon


Make sure you locate the Serpentine Belt Routing Sticker before you proceed. If not make an excellent drawing and take a GOOD Picture. Do NOT try to just remember how it goes back on Should be a 15mm wrench to loosen tensioner to remove belt. Locate mounting bolts to tensioner and remove, replace with NEW tensioner tighten bolts then use wrench arc torque about 15 degrees should snug it down, reroute belt then using 15mm pull tensioner to either side of belt to install belt in correct route. Remove all tools and body parts from engine bay. Do not start engine if anyone is in the vicinity of engine bay. Belt may fly off if you did not do it right and cause all kinds of shrapnell, if it doesn't fly off, visually inspect belt before starting and after, I would suggest being very careful before during and after starting to insure safety.

Jan 05, 2010 | 2000 Dodge Neon

1 Answer

Can you change just the bearing on a belt tensioner on a 2002 neon


hi from uk these tensioners new come as a complete unit and would not advise trying to replace bearing and use the old mount/adjuster here in uk these timing belts come as a kit ie new belt and tensioner however if you are considering belt and tensioner renewal would advise you also check any other pully bearings for smooth running/signes of wear at the end of the day? i'm sure you are aware of horror stories of engine damage should either t/belt or tensioner failure? do the safest thing and fit new kit and have peace of mind hope this helps ?

Dec 27, 2009 | 2002 Dodge Neon

1 Answer

On an 01 neon tension pully how do i get the old one off and the new one on?


SERPENTINE BELT TENSIONER?IT IS PART OF FRONT ENGINE MOUNT BRACKET ASSEMBLY..YOU MUST REPLACE FRONT BRACKET/TENSIONER AS A COMPLETE ASSEMBLY..IT'S A BIT OF WORK..YOU HAVE TO REMOVE P/S PUMP,BOTH BELTS,UPPER ENGINE TORQUE STRUT,LOWER ENGINE TORQUE STRUT AND CRANKSHAFT PULLEY..AS FAR AS I KNOW IT IS A DEALER PART

Jul 09, 2009 | 2002 Dodge Neon

Not finding what you are looking for?
2000 Dodge Neon Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...