Question about 2006 Chevrolet Colorado

1 Answer

My truck keeps cutting off, no warning lights nothing. abs brake fault scrolls across panel, i try to start nothing no noise,no instr. panel lights,sit there for a min., panel lights come on but will not start,another 3to4 mins. it starts up , while trying to start i heard a clicking noise under the dash the truck is under warr. with 24000 miles the dealer keeps it over nite ,but still cant find anything 2006 colorado 4cyl

Posted by on

  • ro barley May 27, 2010

    thank you i dont why the dealer could not fig. it out or test the parts thank you so much you gave me a start ro barley

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,691 Answers

U have a very serious electrical issue, don't fool with this, get it to a GM dealer for warranty, if u attempt to repair it yourself you can void the warranty, I suspect the bulkhead electrical connector or the ignition switch may be defective, but let the dealer determine that..

Posted on May 27, 2010

  • yadayada
    yadayada May 27, 2010

    If the dealer is not able to fix this then contact the GM customer assistance phone number in the owners manual and get the factory involved, don't hesitate to do this right away, I worked for GM and know how all this works, go over the dealers head if u need to.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is T/C warning light?


it is a traction control system.it uses the abs sensors to determine wheel spin and apply the brakes only to the spinning side to keep traction. an abs brake system fault can set off the t/.c light as it can not work with faulty abs .

Mar 15, 2015 | Holden Barina Cars & Trucks

2 Answers

Why is the abs light in my 1994 camero stuck on is it serious


HELLO,IS YOUR ABS STILL WORKING..TEST BY DRIVING ON SOME DIRT,APPLY BRAKES HARD.IF PEDAL PULSATES AND KEEPS TIRES FROM SKIDDING THAN ABS IS WORKING..AND YOU HAVE A BAD SENSOR ON ONE OF YOUR WHEELS..OR IT COULD MEAN TIME FOR A BREAK JOB..BUT YOUR BREAKS AREN'T NOTHING TO TAKE LIGHTLY SO GO GET THEM CHECKED BY A PROFESSIONAL..ASAP..

Feb 22, 2015 | Cars & Trucks

1 Answer

Meaning of ABS light


On vehicles equipped with antilock brakes (ABS), a second warning light is provided to warn if a problem occurs within the ABS system. The ABS lamp comes on when the ignition is turned on for a bulb check, then goes out after the engine starts. If the ABS warning light remains on or comes on while driving, it indicates a fault has occurred in the ABS system.

What happens next depends on the nature of the fault. On most applications, the ABS system disables itself if the ABS warning light comes on and remains on.

Oct 24, 2012 | 1999 Ford Ranger SuperCab

1 Answer

Abs light came then a winding noise


the abs valve assembly is under the drivers seat mounted on the frame if a gear went bad it will keep trying to move the valves it has a electrical plug on it and you will see all the brake lines go in and out of it

Jul 01, 2012 | 2004 Chevrolet Silverado

2 Answers

Abs light stays on and a yellow triangle warnng light


On occasion an ABS light will come on when a brake light is out. So check your brake lights first. Your ABS light is on because there is a malfunction in the ABS system. Is your brake warning light and your ABS warning light both on? This would be an indicator of a major malfunction in the ABS system. Stop driving the vehicle and fix this immemorially. If only your ABS light warning light is on this will not effect normal braking but the ABS system is disabled while the ABS warning light is on. You still need to have it repaired but you still have brakes for the moment. Now the code for this fault will be stored inside the ABS memory module. So you pinpoint this with scanner. Hope this helps

Mar 22, 2011 | Volkswagen New Passat Cars & Trucks

1 Answer

Brake pulsating and abs light is on


brake pulsation is caused by warped brake rotors, not sure the ABS light and the pulsation are related, The ABS warning light requires a scanner to be connected and to read the fault code that is stored when the ABS warning light is turned on.

May 26, 2010 | 2001 GMC Yukon

2 Answers

My Citroen Picasso has been showing a "battery fault" light today. Then all of a sudden i got the "ABS fault", "airbag fault", and all sorts of faults started coming up. When i was breaking and coming to a...


Sounds like the alternator has died, the other warnings all happen because there is not enough power for them to work so they quit and the warning lamp comes on.

Dec 19, 2009 | 1996 Cadillac Fleetwood

1 Answer

My brakes lose power system intermittently


It's quite possible you may need to check out your ABS system. Certain GM light trucks of that year, and a few in subsequent years had issues with the EBCM (electronic brake control module) These units are mounted on top of the ABS valve body, under the vehicle, on the left frame rail (all the brake tubing is attached). Sometimes the faulty unit would cause the electric ABS motor to continue running even after ignition shut down. Sometimes they would cause erratic ABS actuation.The other thing may be a faulty vacuum check valve at the brake booster. If that valve goes bad, your brake pedal will be really high and hard to depress. On some 1/2 ton GM trucks with vacuum assist power brakes, there is an electronic sensor that measure vacuum to the booster. In those instances typically a warning message will come across the drivers info center on the instrument panel. I hope this info can help.

Nov 14, 2008 | 1999 Chevrolet Silverado 1500

2 Answers

Anti lock brakes


depending on the system if it is 2 channel or 4 channel one of the sensors that are located on the backing plate located behind calipers is eithier faulty or dirty you can try brake cleaner these sensors use a small magnet pickup device to sense when the wheel "locks up"

Jul 20, 2008 | 1985 Audi 5000 S

Not finding what you are looking for?
2006 Chevrolet Colorado Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...