Question about 1993 Toyota Corolla

1 Answer

How can I tighten the alternator belt? - 1993 Toyota Corolla

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Loosen the bolts for the alternator, then lever the alternator away from the block to tighten the belt.you have 2 bolts holding the alternator and 1 holding the adjusting arm.(loosen both ends/lever/then tighten)

Posted on May 27, 2010

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7353 Answers

SOURCE: how to tighten alternator belt on 83 nissan pickup

loosen the adj bolts and pry the alt to tighten the belt. if you are at the end of the slot, you will need a new belt.

Posted on Sep 22, 2009

simontricket
  • 235 Answers

SOURCE: alternator belt was slipping tightened belt and it quit charging

Sounds like the alts had it then ?

Posted on Dec 25, 2009

  • 34 Answers

SOURCE: how do I tighten my alternator belt?

did you get the right length belt or correct belt? there should be a bolt to loosen or tighten your belt separate from the alternator.attach bolts..

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to tighten alternator belt on 1993 pathfinder


Four cylinder engine - loosen bottom pivot bolt on alternator, then loosen top bolt and pull the alternator away from the engine to tighten belt. When at proper tension, tighten top bolt to hold tension and tighten bottom pivot bolt.
Six cylinder engine - loosen the lock bolt at the bottom of the alternator, then use the adjustment bolt (perpendicular to the lock bolt) to tighten the belt tension. Once properly tensioned, tighten the lock bolt.

Jan 30, 2017 | Cars & Trucks

1 Answer

How to replace alternator belt for 1984 Mercedes 190E.


Loosen the bolts underside of alternator and then loosen the tension arm alongside the alternator. After replacing the belt, use a piece of wood a suitable length and size to re-tension the belt whilst tightening the tension arm then tighten the lower bolts.

Jan 03, 2015 | Mercedes-Benz Mercedes Benz 190e 2.6...

2 Answers

Car squeals on start-up how i and what bolt do i tighten up


The loose belt. Some are auto tensionors. If equiped with auto tensionor check belt condition first

Jan 10, 2013 | 2002 Mitsubishi Galant

1 Answer

Belt won't tighten on 98 dodge caravan. Does the


If the alternator is fixed then its the tension pulley that tightens the belt. but if the alternator is mounted with a pivotal pin and can be moved along a bolt slot, then it's the alternator that tightens the belt.

Oct 28, 2012 | Cars & Trucks

1 Answer

Nissan Maxima 2005 belts sqeal when starting out is there a way to tighten the belt?


look down at the alternator,you will see a 4"long bracket with a bolt at each end.on the front.and 2# locking bolts underneath the alternator.loosen all the bolts/bracket bolts,then lever out the alternator to tighten the belt,then tighten bracket bolts up first, check belt, then tighten the other 2. job done...metric sockets and ring spanners req.

Jun 24, 2010 | 2005 Nissan Maxima

1 Answer

How do I tighten my alternator belt? I just put in a new alternator, but i cant pull the belt tight enough in tightening down the swivel screw securing the alternator.


did you get the right length belt or correct belt? there should be a bolt to loosen or tighten your belt separate from the alternator.attach bolts..

Feb 26, 2010 | 1987 Subaru Gl 4WD

1 Answer

Need to tighten alternator belt


The alternator is held in place by two bolts.

Top and bottom bolts - 12 mill bolts.

By loosening the bolts (especially the top bolt) you will find that the alternator can be manipulated forward and backwards alongs it housing (guides). To tighten the alternator belts all you need to do is push the alternator away from the tensioners and tighten the belt as required.

Once the belt is taut, but not stetched, simply tighten the two bolts up again and check that the belt has not lost its tension when you where tightening the belts.

Feb 19, 2010 | 2004 Mitsubishi Lancer

1 Answer

How do i change the alternator belt on my 02 mitsubishi lancer?


The alternator is held in place by two bolts.

Top and bottom bolts - 12 mill bolts.

By loosening the bolts (especially the top bolt) you will find that the alternator can be manipulated forward and backwards along its housing (guides). Once the belt has loosened you can slip it off and replace the belt as required.

To tighten the alternator belts all you need to do is push the alternator away from the front of the engine and tighten the belt as required.

Once the belt is taut tighten the 2 bolts and you are away.

Feb 11, 2010 | 2002 Mitsubishi Lancer

1 Answer

Remove and replace alternator


2000 Ford Truck Expedition 4WD 4.6L EFI 8cyl

Alternator - REMOVAL & INSTALLATION

4.2L Engine

  1. Disconnect the negative battery cable.
  2. Disconnect 2 alternator and voltage regulator electrical harness connectors at the alternator. To disconnect push-on type terminals, depress the lock tab and pull straight off.
  3. Remove the positive battery cable nut and remove the positive battery cable at the alternator.
  4. Rotate the drive belt tensioner away from the drive belt and remove the drive belt from the alternator pulley.
  5. Remove 3 alternator retaining bolts and remove the alternator.
To install:
  1. Place the alternator on the engine and install 3 alternator retaining bolts. Tighten the bolts to 18-22 ft. lbs. (20-30 Nm).
  2. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley.
  3. Connect 2 alternator and voltage regulator electrical harness connectors.
  4. Connect the positive battery cable to the alternator and install the nut and washer. Tighten the nut to 84 inch lbs. (10 Nm).
  5. Connect the negative battery cable.
  6. Start the engine and check for proper charging system operation.
4.6L, 5.4L and 6.8L Engines

f52fc60.jpg

Fig. 1 Detach the connectors from the alternator

ffe1937.jpg

Fig. 2 Remove the nut and the battery cable from the post on the rear of the alternator

6ce39ae.jpg

Fig. 3 Remove the 2 front alternator mounting bolts and ...

45a032e.jpg

Fig. 4 Remove the alternator from the engine by carefully lifting it up and...

6513790.jpg

Fig. 5 ... out of the engine compartment
  1. Disconnect the negative battery cable.
  2. Rotate the drive belt tensioner away from the drive belt and remove the drive belt from the alternator pulley.
  3. Detach the electrical harness connectors at the alternator assembly.
  4. Disconnect the positive battery cable and remove the nut and washer.
  5. Remove 2 front alternator bolts.
  6. Remove the rear alternator support bracket retaining bolts and the support bracket.
  7. Remove the alternator from the vehicle.
To install:
  1. Place the alternator in position and loosely install 2 front alternator retaining bolts.
  2. Install the alternator bracket and 3 alternator bracket bolts. Tighten to 84 inch lbs. (10 Nm).
  3. Tighten 2 front alternator retaining bolts to 19 ft. lbs. (26 Nm).
  4. Connect 2 electrical harness connectors to the alternator assembly.
  5. Connect the positive battery cable and install the nut and washer. Tighten the nut to 72 inch lbs. (8 Nm).
  6. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley.
  7. Connect the negative battery cable.
  8. Start the engine and check for proper charging system operation.
5.8L and 7.5L Gasoline Engines and 7.3L Diesel Engine
  1. Disconnect the battery ground cable.
  2. Label and detach the connectors from the alternator.
  3. Release the tensioner and remove the drive belt from the alternator pulley.
  4. Remove the alternator retaining bolts.
  5. Remove the alternator from the vehicle.
To install:
  1. Position the alternator and install the retaining bolts. Tighten the retaining bolts to 15-21 ft. lbs. (21-29 Nm).
  2. Install the drive belt.
  3. Attach the alternator connectors.
  4. Connect the battery ground cable.

I really hope help you with this (remember rated this help) Good luck.

Oct 13, 2009 | 2000 Ford Expedition

2 Answers

Adjust alternator belt


you shouldent need to remove anything to replace or tighten your serpantine belt there is two pullys without grooves the one on the left should be the tensioner if you turn the bolt clockwise it looses the belt off so you can pull it off if done right you can take the belt and pull it around the fan then reverse to put a new one back on

May 15, 2008 | 2000 Suzuki Grand Vitara

Not finding what you are looking for?
1993 Toyota Corolla Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...