Question about 2007 Mercedes-Benz ML320 CDI

Open Question

Ignition key seems to be expired

Events on ML320 :
1. Automatic gearbox oil leakage after a long distance
2. Smoke due to oil leakage (engine was hot due to long distance)
3. Stop engine to check
4. Engine doesn't start again. It seems to start but stops immediately (doesn't get idling)
5. According to a local technician, ignition key is expired and new one must be ordered.

Can someone help ? have you ever faced such issue ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: Servicing my Mercedes C200

Gearbox -> Synthetic automatic transmission fluid
Differential -> Either 90W engine oil or 85W90 gear lubricant
Engine oil -> Not really sure of the weather in Uganda but I take it it stays pretty warm all year long, probably 20W-40 or 15W-40 synthetic
Spark plugs -> Well there could be a long debate over that... if you're having engine performance/missing problems i'd try replacing them right away but with any gasoline ignition system i try to replace the plugs about once a year... plug wires about 5 years... regardless of condition. In my case, i don't usually go for expensive "platinum" or whatever kind of plug that costs about 10 times as much and usually don't do much of a difference... I'd rather buy reasonably priced spark plugs and replace them regularly, and get a much better result and more money in my pockets... because even if you did buy the expensive ones you usually end up replacing them at about the same time you would have the cheaper ones, with the same effect

Posted on Aug 15, 2008

short shadey
  • 421 Answers

SOURCE: automatic tiptronic gearbox sometimes sticks

have you had any transmission services done yet? like a flush sounds like a sticking solenoid but very hard to say with out looking into it please rate -jeff

Posted on Sep 01, 2008

  • 43 Answers

SOURCE: 1999 Mercedes Benz ML 430 periodically stalls at idle

Hi, Joe here The problem sounds like a faulty crankshaft position sensor. The sensor is located on the transmission bell housing on the left side. Can be accessed threw the top of the engine near the firewall.

Posted on Apr 06, 2009

alicantecoli
  • 22133 Answers

SOURCE: 1990 mercedes 300D (diesel)will not shut off

change the switch in the top back of the injector pump ,it has one wire running to it and should be at the back of the pump where the fuel line goes into pump housing

Posted on Apr 12, 2009

Testimonial: "yes thank you, PN W0133-1619965 (shut off valve) the one i used cold be found here. http://www.partsgeek.com/catalog/1990/mercedes/300d/diesel_injection/shut_off_valve.html"

jgwhomeequip
  • 1902 Answers

SOURCE: Engine cuts out while driving, have to restart engine then works.

Ignition system. For failures that cut out like this is a common sign of a ignition system failure

Posted on Apr 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Oil going out from level gearbox


what gear box.
5speed manual "GL4 gear lube 4, can stink bad"
or autotmatic. (ATF pink fluid, and smells sweet)

what engine, some engines, leak oil and goes to the bell housing
then down hill (gravity and wind) to the exh. pipes.
what engine, the 2.7L V6? or G16 or J20? what?
and on calif cars they have calif exhuast, and fits up different,..
so no country stated, or if in calif. (exhaust questions....)

if the gear box leaks, (any)
we first check to see if its overfilled (Jiphphyboobs/syndrome)
if M/t the side plug inspection port, and transfer case.
if A/T box. (automatic) we read the operators guide, not guessing how and read that on a hot running engine we check ATF levels.
if overfilled the ATF foams and will leak and cause bearing failure.
air bubbles do not work right as lubrication... ever.
filled to hot mark on dip stick
unless the stick is missing, as is true on newer cars.

if trans leaks, say where it leaks.
top , bottom
front or rear.??

pretend we are blind. and win.

May 21, 2015 | 2006 Suzuki Grand Vitara

Tip

Caterpillar Fault Codes


CID code Name
1 Injector? 1
2 Injector, cylinder number 2
3 Injector number 3
4 Injector number 4
5 Injector, cylinder number 5
6 Injector, cylinder number 6
7 Injector number 7
8 Injector number 8
9 Injector number 9
10 Injector number 10
11 Injector number 11
12 Injector number 12
13 Injector number 13
14 Injector number 14
15 Injector number 15
16 Injector number 16
17 The fuel shut-off valve
18 The fuel control valve
19 Bypass valve accelerator
20 Device change timing of fuel injection
21 Position Sensor Engine
22 Sensor fuel injection advance
23 Drive Racks
24 position sensor rail
27 is a variable geometry turbocharger number 1
28 Drive with variable geometry turbocharger number 2
41 Power ECU (electronic control unit) 8 V DC
42 Valve inclusion nozzles
70 contact with the parking sensor
71 Timer stop idling
75 Oil temperature sensor circuit hydraulic steering system
The pressure sensor 81 at the inlet trap foreign particles
82 Pressure Sensor pnevmozapuska
84 speed sensor
91 Accelerator pedal position sensor
94 Pressure Sensor fuel pumping
95 The differential pressure sensor on the fuel filter
96 Fuel level sensor
98 Oil level sensor in the engine
99 The differential pressure sensor on the engine oil filter
100 Oil Pressure Switch Engine
101 pressure sensor crankcase gases
102 turbo pressure sensor
104 Oil pressure turbocharger
105 temperature sensor intake manifold
106 sensor input air pressure
Pressure sensor 109 of coolant downstream of the engine
110 Coolant Temperature Sensor Engine
111 level sensor, engine coolant
The differential pressure sensor 112 to filter engine coolant
124 gearbox oil level
126 differential pressure sensor on the oil filter transmission
127 Oil Pressure Switch gearbox
138 Mode Switch low traction
139 Solenoid tip ago
140 Solenoid tip forward
141 Eco Mode Switch
142 position sensor door to clean the radiator
143 contact pressure sensor control unit neutral
144 horn relay reverse
145 power supply circuit 12
146 Mode Switch hitch
147 pressure sensor lock-up clutch
148 pressure sensor in the hydraulic stroke
149 Three-way solenoid stabilization system of the implement when driving
150 Speed Sensor trambovatelya
151 Solenoid trambovatelya
152 diagnostic lamp control systems course
153 speed sensor right drive motor
154 RPM Sensor left actuator motor
155 solenoid switching stroke
156 Solenoid right turn in reverse (electronic display)
157 Solenoid left turn in reverse (electronic display)
158 Solenoid right turn forward direction (electronic display)
159 Solenoid left turn forward direction (electronic display)
160 Relay working equipment paver
161 brake sensor (chassis) pedal
162 Sensor Steering Wheel
The steering angle sensor 163 rotation
164 Pressure Sensor inclusion nozzles
167 Sensor charging voltage of the alternator
168 Electric system
171 of the ambient air temperature sensor
172 temperature sensor in the intake manifold
174 Fuel temperature sensor
175 Temperature Sensor Engine oil
177 oil temperature sensor Gearbox
190 RPM Sensor engine crankshaft
191 sensor output speed gearbox
248 data channel of Caterpillar
249 data channel J1922 SAE (Society of Automotive Engineers)
250 data channel J1708 / J1587 SAE (Society of Automotive Engineers)
Block 252 calibration
253 Personal chip control unit
254 electronic control unit
256 Map adjusting engine performance
257 Level detonation
258 sensor crank angle
259 set via software point fuel injection
260 oxygen sensor in the exhaust gas
261 the fuel injection timing calibration
262 circuit sensor supply 5 V
The power circuit 263 digital sensors (8 or 12)
264 pedal revolutions reduction
265 Input circuit stopping the engine, user-defined
266 Input circuit dry scroll engine (without fuel injection)
267 Chain input remote control signal Safe Stop engine
268 Error programmed parameter
269 circuit sensor supply
Code 270 cable computerized monitoring system (CMS)
271 Sound the alarm
272 sensor has exceeded the allowable turbo
273 pressure sensor at the outlet of the turbocharger
274 atmospheric pressure sensor
275 pressure sensor at the entrance of the right turbocharger
Pressure transducer 276 at the input of the left turbocharger
277 sensor calibration injection timing
278 The indicator light turn on the automatic control of engine speed (AESC)
279 coolant temperature in the intercooler front section
280 temperature sensor gear
281 The indicator light necessary Engine
282 Light indicator exceeding the permissible engine speed
283 Indicator Light air filter
284 Radio on EMS (electronic control system) (the signal of the engine)
285 overheating indicator light, engine coolant
286 Indicator light low oil pressure
287 Miniature digital output? 7
288 Miniature digital output? 8
289 Fuel pressure - before the fuel filter
290 pressure sensor in the pump drive engine cooling fan
The solenoid 291 engine cooling fan
292 solenoid hydraulic oil cooling fan
293 power analog output? 3
294 power analog output? 4
The control unit 295 hydraulic excavator heavy-duty
296 gearbox control unit
297 all-wheel drive system control
298 The probe brake pedal
299 position sensor gear lever
300 The primary windings of ignition coils
301 The primary winding of the ignition coil? 1
302 The primary winding of the ignition coil? 2
303 The primary winding of the ignition coil? 3
304 The primary winding of the ignition coil? 4
305 The primary winding of the ignition coil? 5
306 The primary winding of the ignition coil? 6
307 The primary winding of the ignition coil? 7
308 The primary winding of the ignition coil? 8
309 The primary winding of the ignition coil? 9
310 The primary winding of the ignition coil? 10
311 The primary winding of the ignition coil? 11
312 The primary winding of the ignition coil? 12
313 The primary winding of the ignition coil? 13
314 The primary winding of the ignition coil? 14
315 The primary winding of the ignition coil? 15
316 The primary winding of the ignition coil? 16
317 load cell
318 Right knock sensor
319 Left knock sensor
320 RPM Sensor / injection timing
321 Key switch reset / diagnostic confirmation
322 engine stop switch
323 The indicator light engine stop
324 Alarm lamp
325 detonation caused by the ignition system
Detonation System 326
327 Wrong number of knock sensors
328 Wrong number of cylinders of the engine
329 Error Link
330 Login with contact sensor propane content
331 Ignition Switch
332 keyboard switch
333 switch alarm
334 Reserve output
335 solenoid screw scraper
336 switch engine control
337 Remote Switch emergency stop
338 Relay pre-lube pump motor
339 contact pressure transducer pre-lube the engine
340 solenoid shut-off air
The solenoid 341? 4 warm-hydraulic distributor
342 Auxiliary speed sensor engine crankshaft
343 injector NOx catalyst in the exhaust gas
344 Relay injection pump converter of nitrogen oxides in exhaust gases
Pressure sensor 345 of the injection NOx catalyst in the exhaust gas
346 Relay stabilization system of the implement when driving
347 solenoid feed control (working volume) motor hydrostatic transmission
348 lock switch gearbox
Solenoid 349 gearbox synchronization
350 position sensor rod lift
351 position sensor rod misalignment
352 Sensor lift lever (in the cockpit)
353 sensor lever skew (in the cockpit)
The solenoid 354? 1 lift
The solenoid 355? 1 lowering
The solenoid 356? 1 unloading
357 Solenoid No. 1 return
358 Drive pressurization of the control loop hydraulic system work equipment
359 solenoid locking lifting
360 solenoid lock lowering
The electromagnet 361 tilt lock to download
362 solenoid control the fan speed of the engine
363 Drive stabilization system of the implement when driving
364 pressure sensor piston cavity lift cylinder
365 switch for limiter
366 contact gauge semiautomatic recess
367 Switch stabilization system of the implement when driving
368 switch, automatic / manual mode transmission
369 Login with shift indicator on the gearbox
370 Solenoid floating position arrows
Solenoid 371 beep
372 solenoid opening bucket (for excavator shovel)
373 solenoid closing bucket trucks through the hinged bottom (for excavator shovel)
374 Solenoid swing brake
375 Solenoid swing brake
376 Warning stroke
377-way solenoid brake
378 solenoid automatic lubrication system of the machine
379 Pressure Sensor automatic machine lubrication
380 contact pressure transducer modulation shift gearbox
381 Contact neutral position sensor lift lever (in the cockpit)
382 lever position sensor coupling
383 position sensor coupling
384 shifter
385 contact sensor neutral position tilt (in the cockpit)
386 solenoid lifting hitch
387 Solenoid lowering hitch
388 Contact line solenoid coupling
389 The probe neutral auxiliary lever
The solenoid 390 controlling the flow of hydraulic oil through the forward clutch
The solenoid 391 controlling the flow of hydraulic oil through the reversing
392 solenoid oil supply
The solenoid 393 to drive the front wheels
The solenoid 394 controlling the flow of oil through the drive motor
395 solenoid switch actuator pressure of the front wheel
396 Light on lamp-wheel drive (AWD)
397 contact pressure transducer feed pump
398 pressure sensor in the front wheel drive
399 sensor to the control lever-wheel drive (AWD)
400 The secondary windings of ignition coils

More Fault Codes HERE Caterpillar DTC

on Dec 20, 2016 | Cars & Trucks

1 Answer

Rx8 blue smoke


Blue smoke is caused by burning oil, if it only puffs for a minute on initial start up I wouldn't worry. It is really common for newer fuel injected engines to blow a small amount off blue smoke on cold startup. Plus rx8 use oil while the engine is on, if you are new to rotary engines then a little bit of history on this engine is they do burn much more oil than a typical piston combustion engine, that is due to the lubrication system, it actually uses oil in the entire rotary housing so the rotors dont get too hot. you are supposed to check/add oil every 2 gas fill ups. you would think the would come up with a better system, but thats the downside to a rotary. they are mean engines though. they are a 1.3L but, your oil seals might be going or your ignition coils or spark plugs may be going bad.

Apr 23, 2014 | 2004 Mazda RX-8

1 Answer

ENGINE SMEELS HOT AFTER DRIVING ANY DISTANCE.


Hi Dianne, sorry, but I have to ask: after the oil change, are you sure the oil was re-filled? Maybe some got spilled on the exhaust manifold and needs to burn off (any smoke?) Is there coolant visible in the overflow tank? If the coolant is low, perhaps there is a leak in a hose to and from the radiator. "Hot smell" can also be rubber burning, i.e. drive belts, clutch pressure plate. Hard for me to tell w/o being there-hope this helps!

Jan 29, 2014 | 2008 Subaru Legacy

1 Answer

Nissan cefiro s.touring vq20de consuming a lot of oil and white smoke coming from the exhaust


having a blue smoke no white with a lot oil consumption,means that you have a problem with either valve stem seals got hard and can not hold oil getting in the combustion chamber through the valves.Or your engine bores are worn due to long mileage if you have and the piston rings are not strong enough to hold oil below piston rings in the oil pan. or your piston rings or piston channels broken and oil goes into combustion chamber and burnt through the exhaust system. What you have too do? visit a qualified workshop for a correct inspection and decision taken.Good luck.

Sep 14, 2012 | Nissan Cars & Trucks

2 Answers

Car smokes in front when started then goes away


Blown head gaskets cause this symptom.
Also, oil leakage on to the hot parts of your engine can cause this problem.

The smoke can be either antifreeze or oil that accumulated in a plenum or low spot that gets hot when you start your engine.


Jul 08, 2010 | 2000 Buick Park Avenue

5 Answers

Isuzu bighorn automatic transmission slips after heating


Change your gearbox oil, and clean out the oil strainer.
Should help.

( On some models, you have to remove the gearbox oil pan to clean the strainer )

Nov 01, 2009 | 1994 Isuzu Trooper

3 Answers

What would cause smoke to come out the exhaust pipe


WHITE SMOKE IS BLOWN HEAD GASKET. BLUE SMOKE ENGINE BURNING OIL.DUE TO WORN PISTON RINGS AND WORN VALVE GUIDES.BLACK SMOKE EXCESSIVE RICH MIXTURE.CLOGGED AIR FILTER. FUEL PUMP PRESSURE TOO HIGH.SEVERE MISFIRE.LOW ENGINE COMPRESSION.

Sep 28, 2009 | 1998 Chrysler Sebring

1 Answer

Oil leaking between the gearbox and engine???


Hi,
The main reason for the oil leakage is most probably due to the rear crankshaft seal.
First thing to do is check the engine breather is clear. You can clean it with isopropyl alcohol and dry with a heat gun.


Thank you for contacting www.Fixya.com

Jul 30, 2009 | 1997 Nissan Sentra

2 Answers

What gearbox oil do I buy for my Alfa 156 selespeed?


would be the selenia automatic transmision fluid but if not any automatic gearbox oil will do mate

Jul 18, 2009 | 2000 Alfa Romeo 156

Not finding what you are looking for?
2007 Mercedes-Benz ML320 CDI Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...