Question about 2005 Chrysler Town & Country

1 Answer

Running lights in rear do not wk brakeslights ok turn signals ok just running lights

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

There can be one of four reasons you'll need to check: bulbs are burnt out, switch or relay is bad, fuse is burnt out, or there is a broken or bare wire that is interrupting the current flow.
Check the fuse, then the bulbs (if those are burnt out it means there might be a short somewhere that needs to be traced or replacements will burn out), if you can get to the switch/relay then check connections and continuity. If none of these works you will need to either do an electrical trace for a short or get someone to do it (can be a real pain). Good luck.

Posted on May 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The rear stop lights,turn signals,rear flashers do not work.The rear running lights work.

Hi Sam:
The first thing I'd do would be to check the bulbs.
If you have a voltmeter the next thing would be to make sure you're getting power to the sockets on the brake/signal circuit.
The ground should be OK since the running lights are working.

May 30, 2015 | Cars & Trucks

1 Answer

Why are my turn signals, daytime running lights and low beam lights not work?

The diagram is left rear turn. For the turn signal, the top wire is voltage and the bottom black wire is ground. If the other lamps in that assembly work, the ground should be ok.
At the moment, I suspect you flasher or a wiring circuit problem. For rear turn signals, red wire with white tracer and red wire with blue tracer are the voltage wires for right and left turn at the rear. If you missing voltage, I'd have to use test light and start testing.
left rear turn-ykz1sdp1hrsisoqavsx0xo4z-3-0.jpg

Nov 07, 2017 | 2001 Kia Sportage

1 Answer

1995 saab 900 convertible turn signals and brake lights not working

Check your fuses, even fuses not associated with lighting. If all ok it is probably the muti-funtion switch on the steering column, It is the switch that your turn signal lever connects to.

Oct 03, 2012 | 1995 Saab 900

1 Answer

My 2003 Pontiac Vibe tail lights do not work. The brake lights work. I checked the tail fuse. Turn signals work also. Why no tail lights?

Your turn signal lights and brake lights are the same lights . Question : do the front parking lights work ? The front and rear running lights or parking lights are all on the same circuit and fuse . If the front lights work , and the rear lights don't , make sure the bulbs are good first . If OK , I would suspect the problem is either a bad ground in the rear taillight wiring harness or a bad connection in the rear taillight connector Itself .

Sep 16, 2010 | 2003 Pontiac Vibe

1 Answer

Signal/hazzard lights dont wk. what fuse is it

Check the position 20, 10AMP (color RED)...


Work with: Ignition Run / Heated seats / A/C Heater control / Flasher - Left and Right turn signal switch sense

Hope help with this (remember rated and comment this).

Mar 12, 2010 | 2000 Jeep Grand Cherokee

1 Answer


Check for power at the turn signal switch. White wire comes from brake switch switch into the turn signal switch. The brake light switch is working because the high mount brake light is working..right? Do the turn signals work ok? if so, then the wiring is OK. The brake signal wires that come out of the turn signal switch are dark green(right) and yellow (left).

Oct 27, 2009 | 2001 GMC Safari

1 Answer

No brake,turn, but lights wk

check fuse's, if that doesn't work check bulbs

Jun 14, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

Rear brake lights don't work

you prob got a trailer plug prob bad wires if not tail lights run through turn signal switch tell fix ya bout me ok

May 23, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Rear brake light function not working

You may just have a bad earth in wiring on the lighting or your light control modual could be fuilty has any one tested this for you

Dec 31, 2008 | 1996 Lincoln Town Car

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides