Question about 2001 Dodge Grand Caravan

1 Answer

Heater blower motor only has off and high nothing inbetween

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 1,757 Answers

This is a common problem (mine in a 2002 Dodge Grand Caravan) with the Blower Motor Resistor.
Disconnect the Battery and wait at least 2-mins (to prevent a accidental discharge of the Passenger side Air Bag).
Remove the Dash-Glove Box. The Resistor is located directly behind the Glove Box on the fire wall, and is held on with two (2) (I believe) 8mm screws.
Unplug the Resistor, remove the screws and it pulls-out.
Install the new Resistor, install the screws, plug back in, reconnect the Battery and recheck the Blower Speed operation. Re-disconnect the Battery (Air Bag!) and reinstall the Glove Box.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Posted on May 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Seat leon problems

Your heater control motor has probably went out.

Apr 06, 2014 | 2008 Seat Leon 1.6

1 Answer

Ford F-350 blower only works on high?

It will either be the switch or the blower motor. You can test the switch with a volt meter at the blower motor conection and see if the voltage changes with the switch. I do not know what the actual voltage should be, but if you get nothing accept on high the its the switch. Otherwise look towards the blower.

Feb 02, 2013 | 2008 Ford F-350 Super Duty

1 Answer

Lost my heater/blower all nothing

u need a new blower motor, just replace mines last winter

Nov 21, 2011 | 1999 Pontiac Grand Prix

1 Answer

1999 GMC Denali heater blower motor is always on high. The only way to stop it, while the vehicle is running, is to pull the 25A fuse. The switch does nothing, even in the "off" position.

Hi,Sounds like your resister for your blower motor is shorted. this is mounted under the passenger side of the heater box where the blower motor is. This resister board has a reley mounted on it for high speed operation. very easy to change around 40 bucks at auto zone.

Aug 25, 2010 | GMC Denali Cars & Trucks

1 Answer


It's quite likely the the blower moter relay needs replaced. When this relay burns out you end up with off and high, nothing inbetween. I hope this helps.

Mar 15, 2010 | 2001 Ford Focus

1 Answer

Ac/ heater fan only works on #4 high . is it the switch or the fan itself ? #1-3 nothing . ac is cold and heater is still hot.

u will need to replace the blower motor resistor, it is located next to the blower motor under the hood on the passenger side

Nov 02, 2009 | 2001 Ford Explorer Sport

2 Answers

2003 Dodge Durango A/C Heater Blower does not work?

Sounds like a bad blower motor resistor. That part is what changes the speed of the blower, and your original blower motor may not be bad if it was running on high only. It may have been the resistor.

Aug 18, 2009 | 2002 Dodge Durango

2 Answers

'05 Freestyle Heater/AC blower only works on high(4). How do I get at the switch or blower motor. Everything is plastic! Does anyone have a solution? Thanks, Bob.

here is what my book says:
Blower Motor Speed Control To Remove:
  1. Remove the right lower instrument panel insulator.
  2. Disconnect the electrical connector from the blower motor speed control.
  3. Remove the blower motor speed control mounting screws.
  4. Remove the blower motor speed control.

Jul 06, 2009 | 2005 Ford Freestyle

1 Answer

Heater control only works on high

You need a blower motor resistor,and the heater blower motor should be checked for high amp draw. check Napa for the part or go to Dodge..prpbably about 60.00 dollars.

Dec 19, 2008 | 1996 Dodge Caravan

1 Answer

Heater / Air only work when blower is on set on high

You need to replace the blower speed control module, it is behind the glove box near the b;lower motor.

Oct 26, 2008 | 2001 Dodge Intrepid

Not finding what you are looking for?
2001 Dodge Grand Caravan Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides