Question about 2004 Lexus GX 470

Open Question

I need to replace a fog/driving light bulb on my '04 GX470. I bought an H3 replacement bulb but am confused about the wires There is a wire coming from the cover with a blank socket next to it. There is also a wire coming from the bulb. I assume that I plug the new bulb into the blank socket. It fits! If so what is the extra wire for? I plugged the new bulb into the blank socket in the cover and turned the lights on but it didn't work. Do I have a bad replacement bulb or have I done something wrong? Ron

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: 1998 lexus es 300 dome light

Use a small thin blade screwdriver. Gently pry off where the small slots are located.

Posted on Nov 10, 2008

Ad
  • 65 Answers

SOURCE: how to replace bulb for fog on the front .

You can access it from behind.You have to remove splash shield and go from the underside.

Posted on Nov 29, 2008

  • 1 Answer

SOURCE: I have a lexus ls400

re please and grease the inside the wire harness be for putting in bulbs.

Posted on Mar 01, 2009

crayzeetrayn
  • 837 Answers

SOURCE: Replace a 1999 Lexus LX470 headlight

My information shows that your vehicle has High beam lamps and Low beam lamps .. they are different . which one did you buy?

1) If you bought 1 that is looks like this
1bb151a.jpg
It is the High beam lamp

2) If you bought 1 that looks like this
c35d4b1.jpg
It is the Low beam lamp

Posted on Mar 29, 2009

  • 56 Answers

SOURCE: i have a 04 lexus gx470, does 04 lx470 hood lift

call an auto parts store tell them what type of vehicle you have. they can tell you if the part is interchangable.

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT SHOULD I DO TO FIX THE PASSANGER'S SIDE FOG LIGHT, AFTER TRYING TO REPLACE THE BULB, AND STILL NOT WORKING?


What is the condition of the bulb socket? Contacts show signs of corrosion or overheating? Use a meter to find out if it's missing the 12 volts to the bulb or if the ground is missing (open/high resistance). With the fog lamps powered on, connect the black meter lead to a good solid ground on the body of the car. Touch the red meter lead to each contact in the socket which the bulb plugs into. One of the contacts should measure about 12 volts. If no 12 volts then you will need to check fuses and wiring to find the open circuit causing the no voltage situation. If you measure 12 volts, then you know you have power to the bulb. The problem will then be with the ground. Turn off the fog lamps, set the meter to measure resistance (ohms). Leave the black meter lead connected where it was. Connect the red meter lead to the contact in the bulb socket that you did NOT measure the 12 volts at. The meter should read no/low/minimal resistance. If you measure high resistance, then you will need to locate the corrosion or open/broken wire between the bulb connector and grounding point on the car. Good luck!

Oct 18, 2014 | 2004 Hyundai Santa Fe

1 Answer

2008 Hummer H3 passenger side tail lamp out.


There could be loose wire at the bulb socket ,A break in a wire, Or a bad ground, Or a short, Best way to have it solve is to take it into a auto eletric shop to be check out,

Nov 28, 2012 | 2008 Hummer H3

2 Answers

My fog lights won't work but switch shows power, however when hit the switch can hear the relay on passenger side fuse box can hear it click does that need replaced


Hi, if the light on the switch is coming on, the relay is fine. Unless both bulbs are burned out, the problem is in the wiring between the relay and the lights. I recommend you trace the wiring backward from the passenger side fog light to the power box under the hood to see if the wire is cut. There should be two wires coming out of the power box--one going to each fog light. If the wiring looks good, it is also possible that the ground to the lights is bad.

jturcotte_2157.gif

Aug 29, 2011 | 2000 Oldsmobile Alero

1 Answer

How to replace the fog bulb 2001 nissan frontier


it's easy just done it last night. unplug the wiring harness that goes to the fog light and then there is a bolt on the bottom of the fog light take it out and push the fog light forward and the hole assembly comes out just take off the back and change the bulb. my truck is a 2001 nissan frontier sc 4x4 and it took the h3 bulbs, got mine at wal-mart about $4.00

Read more: http://wiki.answers.com/Q/How_do_you_replace_the_light_bulb_in_a_2001_frontier_fog_light#ixzz1Lt4sxMGk

May 09, 2011 | Nissan Frontier Cars & Trucks

2 Answers

Change light bulb in fog light on 2003 subaru outback wagon


remove lower cover, remove cover on back of lamp and disconnect wire then unhook clip (clip just swings to the side) and remove bulb. dont touch new bulb on the glass part ,will weakin life of lamp. goodluck.

Oct 19, 2009 | 2003 Subaru Outback

1 Answer

Fog lamps won't turn on


OK, you will need to first check the fog light wiring harness. make sure there are no worn wire lines or connections, replace if you see noticeable flaws in the wiring harness. Next, check the clip that fits over the back side of the fog light bulbs. Make sure that the inside copper pins are in good condition and, the the fit is tight. replace the wiring harness if these clips are worn or not fitting properly.

If the above inspections show no apparent wiring harness issues, you will then need to check for bulb failure. make sure that your fog light bulbs are operational. if the bulbs are ok, replace the switch.

Please rata and have a great day:)

May 20, 2009 | 2008 Chevrolet Malibu

1 Answer

1st time install of OEM fog lights into a 1999 Mercury Cougar?


Look under the dash near where the headlamp switch mounts and if yours is equipped you should see I think it is a blue 4 pin connector with the following wire colors OG,OG/WH,OG/GN,BK.
This is for the fog lamp relay.If yours has this connector then you will need to purchase a relay ford part number F6RZ-14N089-AA should list for about $10.

Feb 25, 2009 | 2000 Mercury Cougar

2 Answers

Fog Light Replacement Hyundai Santa Fe


The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.

Jan 29, 2009 | 2004 Hyundai Santa Fe

1 Answer

2004 Maxima driving / fog light bulb replacement


if they are near the bottom of the bumper the only way is take the lower shield off and drop the lt and rt splash shields

Jan 24, 2009 | 2004 Nissan Maxima

2 Answers

Replace rear turn signal bulb on 2007 H3 - driver side


1st::Unscrew the 2 screws that hold the light in.
2nd::Slide your hand behind the light and pull the light towards you. Make sure that you pull it straight, as if the h3 was driving away from you, so you dont break the two pins that are holding the light in...PULL ONE PIN AT A TIME!!!

Dont pull it to far away from the hummer as there are wires attached that need to stay attached.

3rd::turn the back of the bulb to unlock it from the lens...
4th:: slide the bulb out and remove thebulb by pulling it straight out.
5th::put the new bulb in, lock it back into the lens, then insert it back where you got it from,...

MAKE SURE you move the wires out of the way when you put the lens back in...they will get in the way and can be damaged.

Jan 10, 2009 | 2006 Hummer H3

Not finding what you are looking for?
2004 Lexus GX 470 Logo

Related Topics:

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

905 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...