Question about 1994 Dodge Spirit

2 Answers

The fan doesn't turn so I think the motor for the fan is shot. Where can I get a new assembly ?

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Huck up jumper wires from the battery directly to the fan, if fan is good it wlll start. I just got done dealing with that problem. Mine turned out the fan didn't work I got another fan assembly at my local junk yard for $30.00 If you feel better hook up a test lightto one of the fan terminals and a ground to the other the light should light up if not the fan is junck

Posted on Jun 20, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 343 Answers

It is very unlikely that the fan motor is bad. Check the fan relay which is located in the engine bay on either the left or right side. That is a lot cheaper than what you will pay for an assembly ($100 or more) which may not fix your problem. Call or go to your local auto parts store and ask for a cooling fan relay for your vehicle. That is a good place to start.

Posted on May 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fan button doesn't work

Can you hear the fan runing at all? Have you check for a blowin fuse? Or there could be a defective relay, Fan blower motor could be shot, Or the switch it self, Hope this helps you out,

Nov 03, 2012 | Cars & Trucks

1 Answer

Fans only kick on when I run my ac. I replace my coolant sensor still nothing. I have checked the fuses. Where do i go from here?

Sounds like this may be a faulty fan motor, the low speed in these fan assemblys go bad, but the hi speed works when the a/c is turned on. I would check for the cooling fan relay first... you can usually switch this relay with another relay of the same and see if that makes the fan kick on, if it doesn't then i would go with replacing the electric cooling fan motor. Hope this helps

Oct 27, 2012 | 1998 Plymouth Voyager

1 Answer

Air Conditioner fan problem. AC fan very noisy and doesn't blow with full power

bushing in motor is probably shot,or some critter put it's nest in there ,either way the motor has to come out.

Jan 11, 2012 | 2003 Chevrolet Malibu

1 Answer

I have a 1998 jeep grand cherokee 4.0 4x4 it is running a little hot, the air cooling is not good, as I inspected the water, it was rusty and milky. do you think I need to replace the thermostat? oR JUST A...

Several things may be the culprit:

Fan relay - this tells the fan to turn on when the AC is turned on - $50 part DIY
Thermostat - should be in the front of the engine on top with hose running to it - $9 part DIY
Radiator Fan shot - u can replace the fan motor for about $100 DIY
Coolant temperature sensor - tells the fan to kick on when the coolant gets to a certain temp

While the engine is running and warmed up, lift the hood and listen or look to see if your radiator fan is running (the fan should kick on around 190-210degrees) if not, turn on the ac and and see if the fan starts running, if not, your fan motor is bad

Hope this helps

Jul 12, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

When i turn on the contol knob for the air conditioner it will not blow, i have a 2006 hummer h3.

It sounds like your fan is not getting power or the motor is shot.

You can check the fuse panel to see if there is a blown fuse. Your manual should be able to tell you where the fuse panel is and which fuse controls the AC fan.

If that doesn't work either the fan motor is fried and needs to be replaced or there is a wire between the control panel and the fan that is severed/shorted. If you can find the blower fan and you have a multimeter you can test the motor to see if its good. Let me know if you need any more help.

Jun 07, 2011 | 2006 Hummer H3

1 Answer

The heater fan needs to be replaced. I think the bearing is bad cause it makes a vibration noise when its on HI. Just need to know the location of the fan and is it easy to replace.

You should be able to see it under the hood on the passenger side of the car. If you have trouble identifying it...just follow the noise. To replace it all you have to do is disconnect the electrical connector. remove the screws from the motor flange, and remove the motor and fan assembly as an assembly. Your new blower motor may or may not come with a new fan. You may have to transfer the fan from one motor to the other. If it is vibrating really bad, the fan itself may be damaged and you might have to replace it also. There are blower assemblies for some vehicles that come with a new fan already installed - check with your local parts supplier.

Mar 08, 2011 | 1986 Buick LeSabre

2 Answers

Radiator fans not working .how do i know what to check and where on a 1999 honda accord ex

first thing to do is put multimeter in fan connector and check for voltage coming into fan through wire connector. If there is power chances are the electric fan motor in fan is shot. TRY STARTING FAN MANUALLY BY SPINNING THE FAN IF IT PICKS UP AND RUNS YOU NEED NEW FAN MOTOR

Sep 29, 2009 | 1999 Honda Accord

1 Answer

I just bought a new radiator fan relay.(not the one in the fuse box, the one with a heat sink) I've been told it's behind the bumber and also told right side of engine. any help on location?

This is a fan module(relay)It should be ,if you are standing in front of van,and facing motor,down to your right.Look under the van,up at the radiator,and you should see it.I think if you follow the wires from the fans,it will go right to it.If the module went out,chances are one of the fans are replace the fans order the fan assembly.If you try to replace one fan in the fan assembly,the blade will break.Then you will be stuck with a motor you bought,and need the whole assembly.If I can help,let me know.

Aug 29, 2009 | Chrysler Pacifica Cars & Trucks

1 Answer

My fan also has quit the assembly is new so i

Use a known working relay of the same type and turn on your a/c on high, then put in the relay where the old high speed fan relay was. If it comes on, it's the relay. Try this on low speed as well. If they don't come on when the A/C is on, it could be your pcm/ecu as well. If it doesn't communicate with the sensor, it won't turn on. Check with A/C running to narrow it down. If they work here, look into the engine coolant temperature sensor.

Jul 17, 2009 | 1999 Chrysler 300M

1 Answer

Fan and window problems for 2003 Grand Cherokee

Cooling fan relay is most likely shot
underneath & behind the L headlamp assembly

Jun 19, 2009 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Dodge Spirit Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides