Question about 1981 Chevrolet Corvette
Check the fuse to see if it is blown,be sure to have the head lights on,and the dash dimmer on all the way bright,when checking the fuse,if it is not blown,check the fuse to see if it has voltage on that fuse,if it does not,then replace the head light switch.If the fuse has voltage to it,then either a bad connection at the cluster,or the bulbs are burned out in the cluster.
Posted on May 26, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
unhook speedometer cable from transmission and spin cable by hand it should turn smoothly if it des hook end to a low sped drill and see if it holds at a steady speed if it does the the problem is in the plastic speedo gear in the trans if it dos not remove the dash and inspect the connection on the speedo head
Posted on Oct 17, 2008
choke plate may not be moving how does it run? the heater may be burned test by pulling the wire off the auto choke and put the leads of a volt meter on it on ohms if it reads max oms the heater is ok next stick finger into carb and press the throttle plate down, is it moving freely? if not lube the shaft and adjust it so that it will open easily
Posted on Jul 09, 2009
Tips for a great answer:
Sep 26, 2013 | Cars & Trucks
Mar 15, 2011 | 1981 Chevrolet Corvette
Feb 03, 2011 | Chevrolet Corvette Cars & Trucks
Mar 14, 2010 | 1981 Chevrolet Corvette
Oct 25, 2009 | 1981 Chevrolet Corvette
Jul 02, 2009 | 1981 Chevrolet Corvette
Apr 29, 2009 | 1994 Chevrolet Corvette
Oct 17, 2008 | 1981 Chevrolet Corvette
280 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: