Question about 2002 Jaguar X-Type
Jaguar xtype 2.2 diesel
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: jaguar rear window removal
I followed the instructions given by your expert Richard.His instrutions were clear and precise,and I had the problem solved in 5 minutes.best regards A.Taylor
Posted on Jul 03, 2008
check out with your dealer as you might have a recall to fix this problem.
Overheating - Cooling Fans Inoperative - Replace Module Prior To Retailing - Service Action S932
This Service Action Applies to Vehicles That Have Not Been Retailed
The cooling fan module on X-TYPE vehicles may fail under certain circumstances. There are various root causes but the design and quality of the printed circuit board within the cooling fan module are the most significant. The NAND gate used in the circuit is detective causing multiple failure modes, this can result in high engine temperature and overheating due to the cooling fans not operating.
A change has been implemented in production from VIN C91720. On these vehicles a 'Philips' printed circuit board has been used that has a modified voltage spike protection strategy.
To prevent customers from experiencing this issue, install the latest specification cooling fan module on 2002-03 MY X-TYPE vehicles within the above VIN range that have not been retailed.
1. Install new cooling fan module (see Workshop Manual, JTIS CD ROM, section: 303-03, SRO 26.25.38).
Warranty claims should be submitted quoting S932 in place of the warranty fault code together with SRO: 26.25.38 and the relevant part number. This will result in a labor time allowance of 0.8 hours to replace the cooling fan module and payment for the part used. Should the vehicle be brought back into the workshop for this action alone to be undertaken, an additional labor time allowance of 0.1 hours can be claimed quoting SRO: 10.10.10 for drive in/drive out.
Warranty claims should be submitted quoting the information found in the table. This will result in payment of the stated time and, where applicable, parts/miscellaneous expense codes.
The options that allow for drive in/drive out may only be claimed when the vehicle has been brought in to the workshop for this action alone to be undertaken.
The SROs and parts items listed above have been included for information only, there will be no requirement to enter the parts or SROs onto the claim.
NOTE: Always perform a DDW claim search first to determine whether this service action has been performed on this vehicle. The warranty selection under the vehicle inquiry will give a listing of all claims against the vehicle. If this service action number appears in the program code field, do not perform this service action.
Posted on Jan 19, 2009
SOURCE: X type diesel oil filter
Hi, the oil filter is a paper element item in a plastic housing, under the car on the front RHS of the engine. You need a end cap filter wrench to undo it. I've tried a set i borrowed and couldn't find one to fit. I had to make a tool in the end by taking a bolt with a head to match the hex shaped piece at the bottom of the housing and wleded bits of flat steel to it. You could use a correctly sized socket (24-26mm?) but be careful not to break it!! Also make sure you locate the O-ring for the filter correctly.
Posted on Apr 27, 2009
Yes! You will have to remove 4 bolts (15mm Socket) and 6 torx screws (T30). Unclip the front 2 clips and slide the undercover to rear of the car.
Posted on Aug 04, 2009
Tips for a great answer:
Dec 06, 2016 | 2002 Jaguar X-Type
Nov 07, 2011 | 2003 Jaguar X-Type
Feb 09, 2011 | 2004 Jaguar X-Type
Nov 23, 2010 | 2002 Jaguar X-Type
Sep 07, 2008 | 2004 Jaguar X-Type
234 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: