Question about 2000 Volkswagen Jetta TDI

1 Answer

What is the "Cylinder compresion" on a Jetta TDi 2000 engine? Everybody talks about 155 lbs/ft @ 1900 rpm but I need to know in terms of "Bars" or "PSI" per cylinder.

Posted by on

  • yadayada
    yadayada May 26, 2010

    You don't check compression at 1900 RPM, also compression is read in PSI (pounds per square inch), if u are curious about this kind of stuff suggest you purchase a factory sevice manual

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello gilvega69: My name is Roger and I will help you.Depending on your compression Gage.it should read bars or psi.The compression should be 10 to 13 bars (145 psi to 189 psi.) With no more then (3 bars or 43 psi.) maximum difference between cylinders.Should you need further help please just ask. Please rate your answer. This way I know it was useful. Thank You for using Fix Ya. Roger

Posted on May 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is my glow plugs in a 2002 jetta 1.9 TDI is there a torque on tightening glow plugs


all 1.9 tdi engines with 8v cylinder heads have glow plugs out side cylinder head, you will find them easy. Torque is from 12 - 14 Nm.

Mar 07, 2014 | 2000 Volkswagen Jetta TDI

2 Answers

Rebuilding 4.2 v6 ford need torque spec for main bearing


V8 Engines Component Torque Camshaft Sprocket Bolt 40-45 ft. lbs. Camshaft Thrust Plate-to-Engine Bolts 9-12 ft. lbs. Crankshaft Pulley-to-
Vibration Damper Bolts 35-50 ft. lbs. Cylinder Head Bolts All Except 1993 Flanged Bolts Step 1 55-65 ft. lbs. Step 2 65-72 ft. lbs. 1993 Flanged Bolts NOTE 1 Exhaust Manifold Bolts All Except 1993 HO Cobra 18-24 ft. lbs. 1993 HO Cobra 26-32 ft. lbs. Flywheel/Driveplate-to-
Crankshaft Bolts 75-85 ft. lbs. Intake Manifold Bolts Note 2 Upper Intake Manifold-to-
Intake Manifold Bolts 12-18 ft. lbs. Main Bearing Cap Bolts 60-70 ft. lbs. Oil Filter Insert-to-Engine Adapter Bolt 20-30 ft. lbs. Oil Pan 1979 Step1 Large Bolts 11-13 ft. lbs. Small Bolts 7-9 ft. lbs. Step 2 Large Bolts 15-17 ft. lbs. Small Bolts 10-12 ft. lbs. 1980-87 9-11 ft. lbs. 1988 and up 6-9 ft. lbs. Oil Pick-up Tube-to-Main Bearing Cap Nut 22-32 ft. lbs. Oil Pick-up Tube-to-Oil Pump Bolts 1979-87 10-15 ft. lbs. 1988 and up 12-18 ft. lbs. Oil Pump Bolts 22-32 ft. lbs. Rocker Arm Fulcrum Bolts 18-25 ft. lbs. Thermostat Housing-to-Engine Bolts Through 1987 9-12 ft. lbs. 1988 and up 12-18 ft. lbs. Timing Chain Cover Bolts 12-18 ft. lbs. Valve Cover Bolts 10-13 ft. lbs. Water Pump Mounting Bolts 12-18 ft. lbs. NOTE 1 Step 1 Tighten bolts in sequence to 25-35 ft. lbs. Step 2 Tighten bolts in sequence to 45-55 ft. lbs. Step 3 Tighten bolts in sequence an additional ¼ turn. NOTE 2 Step 1 Tighten bolts in sequence to 23-25 ft. lbs. Step 2 After assembly, retorque all bolts in sequence to 23-25 ft. lbs.let me know if this helps and how about a rating.

Apr 23, 2011 | Ford F-150 Cars & Trucks

2 Answers

Anyone know sequence and torque specs for a Volkswagen JETTA 2.0 L, AEG cylinder head?


Per Chiltons...
Step 1: 30 ft lbs
Step 2: 44 ft lbs
Step 3: Plus 90 degrees
Step 4: Plus 90 degrees
Here is the tightening sequence...
10 4 2 6 8
7 5 1 3 9

Mar 06, 2011 | 2001 Volkswagen Jetta TDI

2 Answers

Need to know torque specs for head bolts on a 2002 pontiac sunfire 2.2


Cylinder head bolt torque spec are

First Tightening Pass --- 22 Ft. Lbs or 30 N.m
Second Tightening Pass --- 155 Degrees

Here is the tightening sequeuce just in cause



best_try_17.jpg

Dec 23, 2010 | 2002 Pontiac Sunfire

2 Answers

Torque Specs for Head Bolts on 1997 GMC Sierra V8 5.0 Vortec?


.0L Torque Specs Belhousing to engine bolts 28-38 ft/lbs Camshaft sprocket bolt 40-45 ft/lbs Camshaft thrust plate to engine block bolts 108-144 in/lbs Crankshaft pulley to vibration damper bolts 35-50 ft/lbs Cylinder head bolts -1979-1992 --Step 1 55-65 ft/lbs --Step 2 65-72 ft/lbs -1993-up --Step 1 25-35 ft/lbs --Step 2 45-55 ft/lbs --Step 3 75-85 ft/lbs Differential shaft lock bolt 15-30 ft/lbs Driveshaft U-joint to pinion flange bolts 70-95 ft/lbs Exhaust manifold bolts 26-32 ft/lbs Flywheel mounting bolts 75-85 ft/lbs Front engine mount nuts 72-98 ft/lbs Intake manifold to head bolts --Step 1 96 in/lbs --Step 2 16ft/lbs --Step 3 23-25 ft/lbs Intake manifold (upper intake to lower) 12-18 ft/lbs Oil filter insert to engine block adapter bolt 20-30 ft/lbs Oil pan mounting bolts -1979 --Step 1 (Large bolts) 11-13 ft/lbs --Step 1 (Short bolts) 7-9 ft/lbs --Step 2 (Large Bolts) 15-17 ft/lbs --Step 2 (Short Bolts) 10-12 ft/lbs -1980 to 1987 9-11 ft/lbs -1988 to 1993 6-9 ft/lbs -1994-up 110-144 in/lbs Oil pickup tube to main bearing cap nut 22-32 ft/lbs Oil pickup tube to oil pump bolts -1979 to 1987 10-15 ft/lbs -1988-up 12-18 ft/lbs Oil pump mounting bolts 22-32 ft/lbs Pinion bearing preload 8-14 in/lbs Pressure plate to flywheel bolts 12-24 ft/lbs Rocker arm fulcrm bolts 18-25 ft/lbs Spark plugs 7-14 ft/lbs Timing chain cover bolts 12-18 ft/lbs Vibration damper to crackshaft bolt 110-130 ft/lbs Wheel lug nuts 85-105 ft/lbs

Mar 16, 2010 | Chevrolet C1500 Cars & Trucks

1 Answer

I need the cylinder head torque settings for the 1.9 tdi turbo engine on my 2002 jetta


4 steps, starting from center and doing the normal pattern. 30 ft lbs, then 44 ft lbs.

3rd step 1/4 turn

4th step addional 1/4 turn. Make sure you are using new bolts.

Jul 15, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

2000 VW jetta; what is the torque for valve cover and plenum


I briefly looked online and did not see any info direct6ly relating to the torque spec of the cover bolts. I would guess around 15 ft lbs.--not too much--the head is aluminium--best way to go is to walk up to the service counter of the VW dealer and ask him to provide that information. You have the car and they built it!

Apr 09, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

VW Jetta torque setting and hub nut size????


129 ft/lbs. Per Bentley...I'm pretty sure it's a 30 mm 12 point socket.

Mar 13, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

Overheated a 2000 isuzu rodeo 2.2 litre


  1. Sorry.... I did not see the 2.2 in title. Install the cylinder head with a new gasket. Tighten the bolts in sequence as follows: Step 1: 18 ft. lbs. (25 Nm)Step 2: Plus 90 degreesStep 3: Plus 90 degreesStep 4: Plus 90 degrees
    1. Step 1: 18 ft. lbs. (25 Nm)
    2. Step 2: Plus 90 degrees
    3. Step 3: Plus 90 degrees
    4. Step 4: Plus 90 degrees

Aug 24, 2008 | 2000 Isuzu Rodeo

Not finding what you are looking for?
2000 Volkswagen Jetta TDI Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...