Question about GMC Denali

2 Answers

I have GMC Denali 2002, How can I reset the Meteres for the oil change?? and the sign service engine soon is there all the time, how I can remove it?? tanks

Posted by on

  • bits2009 May 27, 2010

    How I can get that code??

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 19,396 Answers

Hi.

Here the procedure

  • Trun off the engine.
  • Put the ignition key in RUN position.
  • Press and release the accelerator pedal in full and slowly for three times within 5 seconds. I
  • A reset message should flash to indicate that the system is resetting.
  • Turn the key to lock position.

Regards.

Posted on May 27, 2010

  • bits2009 May 27, 2010

    what about the sign "service engine soon".



  • Ginko
    Ginko May 27, 2010

    The light is reset when you do a code scanning on the car computer. Go to Autozone, have a free code scan done and reset the light.

    An alternative way to reset the light is by attempting to start the car with no ECU fuse in the underhood fuse box. This method is risky and there is chance to damage the ECU (car main computer), better doing a code scanning wiht an OBD tool. The ECU fuse method is described here.

    Please do not forget to rate the answer.

    Regards.

    Ginko.


×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

Have the vehicle scanned for codes and take note of the description. The person who is scanning the vehicle can also erase the code if it will take. Get back to me with the code they retrieved and I will advise on how to keep the light off. iambanshee74@yahoo.com

Posted on May 27, 2010

  • Kori Policy
    Kori Policy May 27, 2010

    Alot of autoparts stores will do this service for free. Try Autozone, O'Reilly's, Advanced auto, etc..

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2002 DENALI THAT I JUST PURCHASED. IT HAS 253000 MILES ON IT. I HAVE DROVE IT FOR 3 DAYS AND NOW MY SERVICE ENGINE SOON LIGHT IS ON. CAN YOU TELL ME WHAT PROBLEMS IT COULD BE?


Time for oil change? Loose gas cap? Auto zone and several other parts stores will hook a reader to the plug under the steering column and read the code. Best news is they do it for free.

Feb 14, 2014 | GMC Yukon XL Cars & Trucks

2 Answers

Oil change light will not reset on 2002 Denali


Hello: Try this, Key on engine off Check for flor mat(s) under accelerator pedal, depress accelerator pedal all the way to floor 3 times within 5 seconds.

Jan 13, 2011 | 2002 GMC Yukon Denali

2 Answers

What is the engine oil capacity for GMC 2002 model 8 cylinders


7 quarts for most models but to make shure you can call autozone and they can tell you for shure but all of my 5.7 engines in my chevy trucks take 7 quarts

Dec 12, 2010 | 2002 GMC Yukon Denali

3 Answers

I have just over 60000 mile on my 02 Yukon Denali and my "engine service soon" just came on. Should I take it to the gmc dealer or my nearest Union 76 gas station who has mechanics that can work on cars...


service engine soon is a driver/owner reminder, check your engine oil or rest it after changing to 100%, if you have the owners guide book, read it and follow the maintenance procedure to avoid severe damage to your car

Jul 14, 2010 | 2002 GMC Yukon Denali

1 Answer

My 2004 denali oil percent counter won't reset after an oil change.


turn the key to the on postion, but dont start the car and press the gas pedal up an down 3 times

Mar 21, 2010 | 2002 GMC Yukon Denali

2 Answers

2002 yukon set oil change light


Hello joecradd: My name is Roger and I will help you. With the key on engine off. Depress the foot feet 3 times with in 5 second. If the CHANGE ENGINE OIL flashes for 5 seconds, the system reset. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. Roger

Mar 21, 2010 | 2002 GMC Yukon Denali

1 Answer

HOW DO I RESET THE CHANGE OIL LIGHT ONCE THE OIL


look in the manual......turn the ignition to the on position not starting it of course and then pump the gas petal 5 times then the light will blink a few times turn off then back on...problem solved

Jan 30, 2010 | 2002 GMC Yukon Denali

1 Answer

Service engine light staying on


Hello tdamm...No...the service engine soon (SES) light on your yukon is not telling you to change the oil.
This is a warning light that is illuminated when there is a problem affecting the Emission system and the engines computer management (ECM) has detected it from a fault. It could be something as simple as a loose or defective gas cap. If the SES light is blinking, it's more serious....
The yukon needs to be connected to diagnostic equipment (scanner) for fault diagnosis.
You can go to autozone they will hook up an OBD II scanner to your vehicle and explain the codes to you.
Good luck...i hope this helps and will fixya up.

May 25, 2009 | 1999 GMC Yukon Denali

1 Answer

Engine Oil Life


Change Your Oil And Filter Then Remove The Negative Battery Cable To Reset It.

Jan 07, 2009 | 2005 GMC Yukon Xl Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...