Question about 1995 Chevrolet K1500

1 Answer

Fan only works on high on 1995 Chevy K1500. I tried replacing the relay(?) behind the glovebox, but no change.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 749 Answers

The blower motor resistor is the culprit.Usually is located near the blower motor.Generally an inexpensive repair.However it is possible that the blower motor may have caused the resistor to burn out.

Posted on May 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 93 toyota have replaced the heater core and the blower fan and also had to replace the relay, after replacing the blower I can hear and feel the fan blowing but I barely have air coming out of the...


no. they probably cut the duct work so they could change it easier. open glovebox and if you feel lots of air in there they didnt do the heater core correctly. u may even see the plastic all broken behind glove box. they got lazy.

Mar 11, 2013 | Cars & Trucks

1 Answer

2005 Chevy Trailblazer fan only works on settings 2 and 3. Is the relay going bad and where is it located?


This not the relay, the problem is probably the blower motor resistor pack or the wiring connector for it. These are located near the blower motor behind and below the glovebox.

Oct 17, 2011 | 2005 Chevrolet TrailBlazer

1 Answer

The code reader says i need a fan relay but when i checked under the hood it was a big 30A fuse,i changed it but the fan still doesnt turn on, also i took out one of the fans before i used the code reader,...


you do need both fans in order for the system to work the other fan relay is on the firewall behind the glovebox check that but usually the computer says its a relay but in all reality its usually the fans I would certainly check the relay but would also try running a jumper wire from the battery to the positive wire to the fans if they power up its not the relay but the switch

Aug 15, 2011 | 1995 Dodge Neon

1 Answer

I need the location of the resistor for the heater blower, my heater fan only runs in high. It is a 95 Chevy z71.


its right behind you glove box on top ,its not easy to get to you will need a stuby 5/16 to get it

Feb 01, 2010 | 1995 Chevrolet K1500

3 Answers

1995 Chevy Pickup- Blower works on high only


the resister is usually located in the air box above the passengers feet ,high indicates the resistor needs to be replaced

Sep 04, 2009 | 1995 Chevrolet K1500

1 Answer

1995 Chevy 1500 ac problems


replace the fan 'resistors" near the fan under the hood they are under a cover and, are marked Hi,Low.Med(ium)

Aug 28, 2009 | 1995 Chevrolet K1500

2 Answers

Camry 1991 4 cyl.LE.Blower fan in dashboard stopped working


heater fan speed switch located in heater box by passengers feet up in heater box one plug on it cant miss two screws hold it in!!!!

Dec 27, 2008 | 1995 Toyota Camry

2 Answers

Heater relay


First, turn on the fan motor to high, and then tap the bottom of the motor. The brushes stick to the armature, and tapping the motor will release them. Second, check for voltage at the connector for the motor. It should be 3 VDC at position 1, 6 VDC at position 2, 9 VDC at position 3, and 12 VDC at the highest position. No voltage at 1/2 & 3 = replace the heater resistor, located in the air box between the fan & the heater core. No voltage at all? Replace the fan switch.

Jun 07, 2008 | 1995 Toyota Pickup

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...