Question about 2007 Mazda B3000

1 Answer

What does: "Diagnostic Trouble Code: P1451 Manufacturer Specific Code" mean on a 1999 Mazda B3000. I failed an emissions test due to this code.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Technical Description:
EVAP Control System Canister Vent Solenoid Circuit Malfunction
The EVAP system monitors the canister vent (CV) solenoid circuit for an electrical failure.
The test fails when the signal moves outside the minimum or maximum allowable calibrated parameters for a specified canister vent duty cycle by PCM command.
Symptoms: You will likely not notice any drivability problems.
Causes: A code P1451 may mean that one or more of the following has happened:
*VPWR circuit open
*Damaged canister vent solenoid
*Canister vent solenoid circuit open or shorted to ground, power, etc.
*Damaged Powertrain Control Module (PCM)
*Possible SolutionsVerify canister vent solenoid - To verify normal functioning, monitor the EVAP canister vent solenoid signal PID EVAPCV and the signal voltage
(PCM control side).With the valve open, EVAPCV indicates 0% duty cycle and a voltage approximately equal to battery voltage.
When the valve is commanded fully closed, EVAPCV indicates 100% duty cycle, and a minimum voltage drop of 4 volts is normal.
Output test mode may be used to switch output on/off to verify function.
*Replace canister vent solenoid

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question&&&&

Posted on Sep 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does code dtc3 fail mean on my emissions test,,97 nissan pathfinder


I means that the vehicle failed it's emissions test as it failed the digital trouble code reading test 3
the testing station tests the exhaust emissions and the onboard computer
Your computer failed the test

May 16, 2017 | Nissan Cars & Trucks

1 Answer

Whats this code mean on 99 f150 P1451


It means the circuit is malfunctioning.
You need to perform the basic checks of the associated wiring and connectors. There could be a short or open circuit, or a bad connection, or a bad vent solenoid. You need to test the circuit to find out where the problem lies.

Jan 26, 2014 | Cars & Trucks

1 Answer

I have a 1998 Nissan Maxima GLE, I Failed the Emission Inspection (DTC) Diagnostic Trouble Codes of "P1492","P1105" What these Codes exactly? mean


A code P0300 may mean that one or more of the following has happened:
  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective compute
  • P1105MAP/BARO Pressure Switch Solenoid Valve
  • Check and clean the MAP sensor, or replace.
  • P1492EVAP Canister Purge Control/Solenoid Valve (Circuit)
  • Replacing the purge solenoid will clear code P1492 This should also clear code P0300 as well.

Oct 16, 2012 | 1998 Nissan Maxima

1 Answer

2003 Land Rover Range Rover;SES light came on, had it scanned and came back w/code p1453. Can you tell me common symptoms of this code and what a fix may be?


Diagnostic Test Code (DTC) P1453 is a "Manufacturer Specific" code, which means that it is defined only by the manufacturer of the vehicle and does not exist in any standard lists of DTCs, such as the standard SAE J2012 listings.

DTC P1453 for a 2003 Land Rover Range Rover, is defined by the vehicle manufacturer as "DM-TL REFERENCE CURRENT TOO LARGE"

The possible causes listed by the manufacturer are"

> DM-TL Module

Please note that DM-TL is an acronym for "Diagnostic Module - Tank Leak". This is the module that performs the diagnostic testing on your evaporative emissions system.

So, basicly what is happening here, is that the system that was designed to test the system and warn you of an impending failure, is what is actually causing the system to fail.

Jun 13, 2012 | Land Rover Cars & Trucks

1 Answer

What does a p1451 Manufacturer specific code mean?


P1451 FORD - EVAP (Part of the fuel vapor emission control system) Control System Canister Vent Solenoid Circuit Malfunction.The Purge control vent valve is located on the carbon cannister tray near the gas tank in rear of the truck, it is either damaged or has stopped working.

Aug 17, 2011 | Ford Explorer Cars & Trucks

1 Answer

Did not pass state inspection (vehicle)


First the fault codes,
U110C is No Fuel Level Bus Message
U0155 is No Cluster Bus Message.
Unfortunatly you have to be able to communicate with the instrument cluster with your scanner to diagnoise and I do not think an aftermarket scanner can do this.




Mar 02, 2010 | 2005 Chrysler PT Cruiser

1 Answer

Manufacturer Specific Code P1171


Change upstreamO2 sensor on bank #1



FixYaWIZ...saailer

Dec 10, 2009 | 1997 Saab 900

1 Answer

Emission test found some trouble codes


U0121 Communication error to ABS HU/CM

Apr 06, 2009 | 2005 Mazda 6

1 Answer

Auto Diagnostic Trouble Code


cORRECT. tHIS CODE DOES DEALs With emmissions. P1400 deals with the EGR valve. In case u are not aware, EGR stands for Exhaust Gas Re-circulation. What really this valve does is that it re-cycles some of the exhaust gases into the cylinder for combustion. The EGR valve might be blocked or has malfunctioned. It is advised that this valve changed or consult with a mechanic who is knowledgeable about this technology. a malfunctioned/dis-abled EGR system will cause the car to fail an emissions test, and may cause the EGR passages in the cylinder head and intake manifold to become blocked with carbon deposits, necessitating extensive engine disassembly for cleaning. So it is advised that u repair this ASAP

Jan 19, 2009 | 1997 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...