Question about 1994 Chevrolet C1500

1 Answer

Brake light on dash stays on while driving and when i come to a stop i here brakes queeking. but i dont know what brakes are bad. the front or back. also when im driving i here a clicking noise. i had the brakes done about a year ago. how do i check the brakes? and the clicking noise i dont know if that has any thing to do with the brake. but the noise is coming from the front of the truck.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

You may have a frozen brake caliper . That well wear out your brakes quick & when brake pads are worn
out that lowers your brake fluid causing brake lite to come on . To check brakes remove wheel and look for groves in rotors in front . rear is a bit more complex you need to back the automatic brake adjuster remove brake drum all pads should be at least 3/8th inch thick if not replace hope this helps CJ

Posted on May 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2006 f150 has new brakes and rotors,fluid full but my dash brake light stays on. Soon as you start it and the whole time you drive. Also the cruise quit too. Once the light went off then the cruise


This sounds like the brake light switch or the control switch on the brake pedal is bad or loose. Check under the dash above the brake pedal there should be one or two switches that tell the brake lights to come on and the cruise control to shut down.

Feb 13, 2015 | 2006 Ford F-150

1 Answer

1995 Chevy Caprice Wagon, right side signals and brake lights dont work


change the bulb if still out then check and test socket/ground wiring/wire harness for damage

Apr 28, 2017 | Cars & Trucks

3 Answers

1998 nissan frontier dashboard brake light will not go out unless motor is turned off...


You have a brake light switch attached to your brake pedal,may be loose or bad.Read what it says,if bad light will stay on,easy to replace,just disconnect electrical connector,then unscrew nut,then remove,the end piece clicks on and off,I have a 85 Nissan 720 truck,have replaced mine before years ago. Duralast Stoplight Switch JA413 Read 1 Reviews on Duralast JA413

May 20, 2017 | Cars & Trucks

6 Answers

My tail lights stay on when I turn car off and put in park which is killing my battery, also my brake lights do not come on when i press brake pedal I checked fuses and they are good. I bought a stop light...


It sounds like your brake pedal switch is not working right. Are the lights on all the time, or just when you turn ignition off? If the former, it is bad brake switch. If the latter, you likely have a bad ground located somewhere in the wiring harness.

Most vehicles have the switch located on a small plate next to the brake pedal arm. Follow the pedal up the arm and to the firewall. Along the way you should see a plunger style switch that looks like the one that you bought. It might also be found inside or next to the brake booster under the hood.

Aug 25, 2009 | 1992 Honda Civic

1 Answer

Brake light stays on and has always been on since i acquired the vehicle. Front brake pads are new and fluid is good dont yet know about the back.


Hi..my name is Keith..and the brake light on the dash comes on when the fluid is low..so if its full..you might need another brake master cyclinder..to get the light to go out..i hope this helps

Jun 29, 2009 | Dodge D150 Cars & Trucks

1 Answer

Brake light on dash stays lite. What does this


There is a pressure sensing switch on the master cylinder that will turn on this indicator light on the dash if there is enough of a pressure difference between the front brakes vs the rear brakes. It would be a good idea to check brake system for leaks and fluid level.
Sometimes it's just a matter of readusting the switch by having someone hold pressure on the brake pedal while you slightly bleed either the front or back brake line at the master cylinder. Be sure you are confident you are knowledgeable to handle this... you don't want braking problems afterward... Good luck and be careful.

May 10, 2009 | 1989 Plymouth Acclaim

2 Answers

Back brake lights - all 3 - stay on.


REPLACE THE BRAKE LIGHT SWITCH AT THE BRAKE PEDAL ARM.

Feb 17, 2009 | 2004 Land Rover Discovery

2 Answers

Brake? Problem with 01 Saab 9.3


to begin i dont know what it means to say expensive or not how ever, all the lights at the same time could only mean one thing the problem could be in one of the diodes in your alternator is bad thus turning on all the lights on the dash board,

now regarding your brakes especially on saab;s shake or vibration is caused by uneven surface on the brake rotors (usualy the front) my suggestion is to replace the front rotors and the brake pads at the same time.

Nov 12, 2008 | 2001 Saab 9-3

1 Answer

95 Ford Windstar brake or ABS chatter


the ABS antilock braking system will if a fault occures? light up indicator light on dash but this means ABS is none operational thereby you will still be able to stop as if car not fitted with system i am conserned at your comment having to pump brake pedal? why? too much travel on pedal? but will pump up harder?? when you replaced front brakes? were the pads and discs replaced? did you bleed the brakes hydraulc system after ? from what you've said i am sure the ABS is working but a sensor /s is sensing premature brake lock up on either front or rear? so if you are certain front brakes ok? thencheck rears? if rear brakes are drums ? remove and inspect for wear or possible contamination ie cyl leaking fluid on shoes would cause brakes to adhese to drum on application also grabbing ? hope this helps some?

Oct 24, 2008 | 1995 Ford Escort

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...