Question about 1995 Jeep Grand Cherokee

1 Answer

Engine code What means this code on 1995 jeep grqnd cherokee limited : flash pause flash flash pause flash flash flash flash flash pause flash flash flash flash flash

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

12 and 55. The 55 means end of code session, the 12 means no distributor reference. Both of these codes are normal with the engine not running, so do not go out and purchase a dstributor. Is there another problem with the vehicle, or did you just want to know the codes? Comment back to continue,thanks.

Posted on May 26, 2010

  • james Jun 07, 2011

    12 means the battery has been disconnected or dead in the last 50 key turns.... 55 means end of diagnostic test...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the obd port on a1994 jeep grand cherokee


HI there:
For the engine computer, the connector is in the engine compartment, right beside the coolant overflow bottle. It should be clipped to the wiring harness, and may have a plastic cap on it. It's shaped like a fat L.



Extracting Fault Codes:
Without ever starting the engine Turn the ignition switch ON, OFF, ON, OFF, ON and observe the CHECK ENGINE LIGHT. The CHECK ENGINE LIGHT should begin to flash a series of codes. The flashes will be separated by short and long pauses. The long pauses separate the "ones" and "tens" positions, and each code from the next. A code 55 will be displayed at the end of the test.



Hope this helps.

Feb 12, 2013 | 1995 Jeep Cherokee

1 Answer

Can codes be pulled from 95 jeep without a scanner


Yes. Turn the ignition switch to ON, do not engage the starter. Do this 3 times. On the third time leave the key in the ON position and start counting the number of times that the Check Engine Light flashes on and off. There will be a slightly longer pause when it is flashing out the next digit. Then go to http://autorepair.about.com/library/ts/obd-i/bl-dtcs-75a.htm and see what your code(s) mean.

Aug 25, 2012 | 1995 Jeep Grand Cherokee

1 Answer

What is service engine light code 12 mean



READING CODES USING MIL (CHECK ENGINE) LAMP

Be advised that the MIL or CHECK ENGINE light can only perform a limited number of functions and it is a good idea to have the system checked with a scan tool to double check the circuit function.

  1. Within a period of 5 seconds, cycle the ignition key ON - OFF - ON - OFF - ON .
  2. Count the number of times the MIL (check engine lamp) on the instrument panel flashes on and off.

The number of flashes represents the trouble code. There is a short pause between the flashes representing the 1st and 2nd digits of the code. Longer pauses are used to separate individual 2-digit trouble codes.
An example of a flashed DTC is as follows:


Lamp flashes 4 times, pauses, then flashes 6 more times. This denotes a DTC number 46. Lamp flashes 5 times, pauses, then flashes 5 more times. This indicates a DTC number 55. DTC 55 will always be the last code to be displayed.


0900c1528007935b.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Diagnostic trouble code chart (1 of 2)-1995-97 engines


0900c1528007935c.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Diagnostic trouble code chart (2 of 2)-1995-97 2.0L engines

Jul 26, 2012 | 1995 Dodge Neon

1 Answer

1995 jeep grand cherokee larado engine code reading 34155


Hi Angela:
We cannot understand your "345155" fault code, keep in mind that 1993-1997 codes just have two digits. I suggest re-check to read and note your fault codes acdording with this read codes procedure, with out starting the engine: turn the ignition key on, off, on, off, and finally on.

The check engine light on the dash will begin to flash. The light will flash the first number of the first digit pause and flash the number of the second digit. Example: five flashes, pause, three flashes = Code 53 PCM failure or Code 54 no cam shaft position sensor signal from distributor etc, etc.

Try this and send us this fault code to send you additional detaild.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 05, 2011 | 1995 Jeep Grand Cherokee

2 Answers

Fault code


There you have two codes:
1 2 or 12 = Battery recently unpluged
5 5 or 55 = End of Test.

So, you dont have malfunction codes in there, this is good.

More details can find in :
- Read Check Engine Codes
- Reset ECU Procedure

Hope help with this (remember rated this DIY and this post, an comment it).

Mar 18, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Check engin light


it is flashing the codes if you got the sequence right it is codes 12,21,55 what engine? 12 battery disconnect,21 isO2S shorted to voltage, and 55 is MIL may not come on

Mar 05, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Check engine on jeep grand cherokke 1995


Try again and verify, for example.
3 flashes,pause,then 3 more, is 33. etc.
5 flashes, pause 5 more, is code 55.(end of message)
always 2 digit number, then slightly longer pause in between those 2 digits.

Feb 23, 2010 | 1995 Jeep Grand Cherokee

2 Answers

How to retrieve without a scanner the fault code on jeep grand cherokee limited 1995


buy a middle of the road good scanner for 150.00 at pep boys well worth it!

Jan 04, 2010 | 1995 Jeep Grand Cherokee

2 Answers

Jeep grand cherokee


its under the hood along the wiring harness

Jan 19, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Check enggine


Do a self test. Turn key to on position and back to off position 3 times. a series of flashes will commence from the "check engine" light. The first set of flashes is the 1st digit of the code, then there will be a pause, then a 2nd set of flashes, This will be the 2nd digit of the code. For example, 3 flashes, pause, 7 flashes, means code 37. Check what the code means in a Haynes auto repair manual. This will tell you what the engine light on your car means.

Jun 12, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...