Question about 2001 Chevrolet Blazer

1 Answer

How do I change the windsheild wiper arms? - 2001 Chevrolet Blazer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,382 Answers

Hi,
Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage. Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later. Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of work to break it free, but with the right amount of wiggling, it will disengage. Then you can replace the new windsheild wiper arms to it.

Thank you !!

Posted on May 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I moved my windsheild wiper arms to remove the snow. now the driver side windsheild wiper keeps going off the wind sheild


Where is the blade when switch is off? Some of the GM cars in the 2000 years had problems with the post where the wiper arm attaches. The post will strip the groves when trying to move heavy snow. You will have to remove the arm, and reinstall it when the wiper switch is off.

Mar 11, 2015 | 2000 Pontiac Grand Prix

1 Answer

Driver side wiper doesn't work. It moves if you hold it away from windsheild. Did I strip it from frozen snow on windsheild


remove black plastic cap at base of wiper arm,tighten 14mm nut underneath cap while wipers are off and arm is in normally parked position ,replace balck plastic cap and you should be good to go!you might want to snug up the nut on the other one too!

Feb 02, 2011 | 1996 Nissan King Cab

1 Answer

HOW DO YOU ADJUST THE WIPER ARM TENSION HAD WINDSHEILD REPLACE AND NO WIPER IS BLOWING AROUND NOT CLEANING OF WINDSHEILD WHEN DRIVING OVER 45 MPH EVERYTIME A TRUCK GOES BY THE WIPER FLOPS


Hello: From your description of the problem it sounds like the wiper arm is bent. This could have occurred when the windshield was replaced. You might take truck back to who ever replaced windshield and DEMAND they correct the problem. The w/w arm will have to be replaced.

Jan 24, 2011 | 2002 Ford Windstar Cargo

2 Answers

I pulled the wiper arm up to clean under it and now I cannot get the wiper arm to go back to the down position. I understand it's probably something simple.


first remove wiper arm again and ignition on then switch on wiper without arm, let it run few second and switch off wiper wait few second and switch off ignition, now it has come to the rest position so you have to install wiper arm at rest position. don't let it to move when you tight it hold it by hand, I think this information be help you if you think right way what i mean. is this information helped you?

Oct 31, 2010 | Mercedes-Benz E320 Cars & Trucks

1 Answer

The wipers go off the windshield on the drivers side


turn your wipers off, then take the drivers side wiper arm off, thenlay the wiper on the windsheild where u want it to stop , then put the arm into the grooves(on the wiper motor) accordingly.

Oct 28, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

Windsheild wiper does not remain in contact for the full stroke.The blade actually raises off the windsheild.1995 volvo wagon. three sets of blades, two sets replaced by mechanics.


Try this:

With ignition on, turn on wiper switch. When wiper arm gets to point where blade does not touch screen, turn off ignition switch so that wipers do not return to park position. It may take a few goes to stop arm in the right position so repeat process until it is in the best position.

Check main wiper arm and bend slightly towards windscreen so that blade touches screen and there is some spring pressure from the arm to keep blade on screen. Also check that there is no interference between main arm and the section which supports the rubber blade. If you get blade chatter as the arm sweeps, twist the end of the main arm slightly in the opposite direction to the movement that produces the chatter. It may take a bit of trial and error to get it all right.

Oct 04, 2010 | Volvo 850 Cars & Trucks

1 Answer

Windsheild Wipers will not move, the arm seems to be slipping on the motor shaft,


It sounds like you live in a climate were snow and ice occurs. If so a lot of people leave their wipers on upon shutting off their cars. If you happen to do that and the windsheild had moister on it or if the snow starter falling while your vehicle was still warm it will freeze. The larger the snow amount the stronger the force will be if you start your vehicle up the next morning with your wipers buried in frozen ice & snow. Since the wipers were not shut off the wiper motor will run and the wiper blades will not. This will strip the linkage the wiper arms press onto leaving you with out working windsheild wipers

Jan 27, 2010 | 2003 Chevrolet Tahoe

1 Answer

Wipers


If your just changing the wiper blades, turn the wipers on and when they get to the top, take the key out. They dont move back much but its enough to change them. If you want to take the arms off, lift the hood up and use a 13mm socket or wrench to loosen the nut and then wiggle the arm off. If you need to change the motor, unclip the black molding that the wiper arms are on and you have full access to the motor.

Apr 16, 2009 | 2000 Chevrolet Malibu

1 Answer

Wiper arm assembly mechanism


I THINK YOU SHOULD TURN OFF WIPERS TAKE WIPER ASSEMBLY OFF PUT BOTH ON AT LOWEST POINT ON WINDSHEILD, TRY THAT.

Sep 05, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...