Question about 1999 Dodge Intrepid
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 27, 2016 | 2000 Dodge Intrepid
May 09, 2011 | 2001 Dodge Intrepid
Apr 21, 2011 | Dodge Intrepid Cars & Trucks
Aug 12, 2010 | 2000 Dodge Intrepid
Jul 14, 2010 | 2000 Dodge Intrepid
I have a problem with a 1999 Dodge Intrepid 2.7. Looking for some help or suggestions.
Problem: I only have a spark from the #2 coil.
Vehicle purchased from an Auction and would not start. The vehicle would only backfire. When I removed the valve covers I found that one of the rocker arms had popped out. I replace the heads with heads from a 2001 Intrepid 2.7. I used the cams, primary and secondary timing chains from the 1999 heads. Not sure if I used the original primary (left) cam sprocket from the 1999 or one I purchased in a kit from a Dodge dealership. I tried to use the new primary timing chain but it was not the same. The replacement heads were surfaced and a new head gasket was used. When I tried to start the vehicle it had no spark. The vehicle had set at several locations and parts may have been removed or changed.
I tried 4 ASD relays with no effect. I then tested all 4 on a 2002 Intrepid 2.7 that runs and all worked. I then discovered that the Crank PS has missing. I replaced the Crank PS with one from a 2002 Intrepid 2.7 with no effect. I then replaced the Crank PS with a Crank PS from a 1999 Intrepid 2.7 and got a spark at the #2 coil only. I then replaced the PCM and TCM from the same 1999 Intrepid I got the Crank PS from and still only have spark from #2 coil. I then changed the Cam PS, still spark only from #2 coil. I have tried several coil packs on connector #2 and all have spark. Each coil pack that sparks on #2 will not spark on any other connector. Spark from #2 coil is weak.
I then replaced the wire harness from the PCM to the coils and fuel injectors and still only have spark from the #2 coil. What am I missing? Any suggestions, advice or related information will be greatly appreciated!
Keith P. Richardson
May 20, 2010 | 1999 Dodge Intrepid
Jun 14, 2009 | 1998 Dodge Intrepid
Dec 21, 2008 | 2000 Dodge Intrepid
Nov 28, 2008 | 1993 Dodge Intrepid
Jul 21, 2017 | 1999 Dodge Intrepid
374 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: