Question about 1987 Suzuki Samurai

Open Question

What is the spark plug wire diagram for a 1.3 suzuki samuria 1987

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 512 Answers

SOURCE: 2001 dodge ram 1500 v8 spark plug wire diagram

the firing order is 1 8 4 3 6 5 7 2 clockwise around the cap

Posted on Jan 03, 2009

Ad
  • 462 Answers

SOURCE: need a diagram of the firing order of spark plug wires from coil packs to spark plugs

FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

Posted on May 31, 2009

localwonder
  • 6784 Answers

SOURCE: 2004 ford ranger edge 3.0L spark plug wire diagram

The diagram you seek is below.


374d96b.jpg

Posted on Jul 26, 2009

  • 158 Answers

SOURCE: spark plug wiring diagram for gm 3.4 liter v6

http://autorepair.about.com/od/enginefiringorders1/Engine_Firing_Orders.htm

Posted on Aug 30, 2009

  • 432 Answers

SOURCE: how to adjust air fuel mixture

On any carburator,one screw is for the idle speed, the other the air/fuel mix.Start the engine and let it get plenty warmed up. Adjust the idle screw to make the engine run slow. Turn the air/fuel screw in until the engine starts to die then out till it starts running loady.You want the screw between these two locations. Adjust it till the engine runs the fastest. Now adjust the idle speed screw to about 1000 RPM.
I hope this helps you.

Posted on Sep 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suzuki samari JX 1987 engine miss.


Headgasket is blown between those 2 cylinders. Do a compression check on all cylinders probably between 150 - 180 lbs in good condition. Adjacent cylinders will be nil. If there is some pressure, say 50 lbs, check the valve clearances on all cylinders.

Apr 08, 2017 | Suzuki Cars & Trucks

1 Answer

What is the firing order for a 2004 suzuki aerio 2 ltr 4 cylinder


Suzuki firing order diagram spark plug wires Cars & Trucks ...

www.fixya.com > ... > Cars & Trucksfiring order for a 1992 Suzuki Sidekick 4 cylinder 16valve The firing order is 1, 3, 4, 2. ... I have a 2003 Suzuki Aerio and it stopped running. ... firing order diagram 2004Suzuki Forenza firing order diagram which engine?, but all 4 bangers not ... ...firing order for plug wires 2007 suzuki forenza 2.0 engine Look at the engine.

Sep 22, 2015 | Suzuki Cars & Trucks

1 Answer

I have 1987 Dodge ram 50 2wheel drive 2.0l engine i need a diagram on how the spark plug wires go


Firing order 1-3-4-2 --------- front ' ' of ' 1 2 3 4 'Distributor rotates clockwise vehicle ' ' ---------

0900c15280088b64.jpg

Feb 19, 2011 | 1987 Dodge Ram 50

3 Answers

Location of spark plug wires to distributor cap for jeep cherokee 4.0 1987


Here is a firing order diagram for that vehicle and engine, and let me know if you need any help to understand this diagram, or if you require any further assistance.


f833d4b.jpg

Sep 28, 2010 | Jeep Cherokee Cars & Trucks

1 Answer

I need a spark plug wire diagram for 1987 ford 302 crown vic


1987 Ford Crown Victoria 5.0L FI 8cyl

Duraspark Type Plug Wires
The spark plug wires used with the Duraspark type ignition system are 5 / 16 in. (8mm) in diameter to contain the higher output voltage. There are two types of wires used in this system, and some engines may have both types installed. It is important to properly identify the type of wire used for each cylinder before replacements are made.

Both types are blue in color and have silicone jacketing. The insulation material underneath the jacketing on some plug wires is a silicone layer separated by glass braid. The plug cable not incorporating the silicone layer is used where engine temperatures are cooler and are identified with the letter SE with black printing. The plug cables with the silicone insulation are used where high engine temperatures are present. These cables are identified with the letters SS with white printing.
Each spark plug cable, if original, is marked with the cylinder number, model year and date of cable manufacture (quarter and year). Service replacement wires will not have cylinder numbers, or manufacture date.


On any vehicle equipped with a catalytic converter, never allow the engine to run for more than 30 seconds with a spark plug wire disconnected. Unburned fuel in the cylinder may ignite in the converter as it is exhausted and damage the converter.

When removing spark plug wires, mark and tag the individual wires. Grasp, then slowly, twist the insulator back and forth on the spark plug to free the insulator. Do not pull on the wire directly as it may become separated from the connector inside the insulator. Special tools are available which can help ease plug wire removal, and prevent damage to a cable.

When installing a new set of spark plug wires, replace the wires one at a time so there will be no confusion. Start by replacing the longest wire first. Route the wire exactly the same as the original.

6bd8840.jpg

Fig. 1: 6 cylinder engine-240Firing Order: 1-5-3-6-2-4Distributor Rotation: Clockwise

e1455b9.jpg

Fig. 2: 8 cylinder engine-255, 302, 351, 400Firing Order: 1-5-4-2-6-3-7-8Distributor Rotation: Counterclockwise

41629e9.jpg

Fig. 3: 8 cylinder engine-390, 427, 429, 460Firing Order: 1-3-7-2-6-5-4-8 DistributorRotation: Counterclockwise


Visit autozone.com (free register) for more details.

I hope helped (rememer rated this) Good luck.

Oct 15, 2009 | 1987 Ford Crown Victoria

1 Answer

Firing order diagram on a 1987 mazda B2600


To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired.


0900c1528007698b.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 1: 2.2L Engine Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise


0900c1528007698c.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 2: 2.6L Engine Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise

Jul 10, 2009 | 1987 Mazda B-Series

1 Answer

The plug wires are all off of the plugs on my suzuki samairi. i need to know which one goes where.


The best information I have is;
The order is 1-3-4-2
This is the Firing order for the 1987 suzuki samurai with a 1.3 motor.

When changing plugs, do them one at a time to prevent mixups.
When changing plug wires, do them one at a time to prevent mixups.

Apr 09, 2009 | 1987 Suzuki Samurai

1 Answer

87 samuria tansfercase problem


It doesnt need rebuilding. The shifter sheet that the gear shifter sits on is worn out or not even there which allows the shifter not to operate properly.

You can order a poly one from vendors like Lowrangeoffroad, Trail Tough, Petroworks, and some others.

Mar 05, 2009 | 1987 Suzuki Samurai

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...