Question about 2004 Chevrolet Silverado

1 Answer

There is a grinding sound while driving my 2004 Chevy Silverado 4x4. I have changed the Wheel Bearing Assem., checked the brakes and I dont believe its the CV joints, because there is not a clicking sound while turning. Any idea of what it could be?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Check the brake pads

Posted on May 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn right my rearend pops and grinds like its breaking something


Joe, Could be a few things, U joint, E brake shoes falling off inside rotor, bad bearing in diff. better take it into a good tech. and have checked. too hard to diagnose from here. "Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info.
Grinding noise Chevy Silverado and what caused it
So the front seal on my 2004 Chevrolet Silverado rear Diff was leaking so...
http://www.fullsizechevy.com/forum/general-discussion/technical-maintenance/415961-grinding-noise-coming-under-truck-rear-truck-help.html
Understanding and Diagnosing Rear Differential Noise Fuel Friction An...

Apr 20, 2016 | 2004 Chevrolet Chevrolet Silverado 1500...

1 Answer

I have a 2004 chevy silverado four wheel drive and


Could be the brake caliper bracket is touching the rotor and making the noise. Check for shiny spots where close to rotor.

Sep 25, 2014 | 2004 Chevrolet Silverado

1 Answer

2003 Chevy Silverado is making a clunking noise, on and off sometime over bumps. Also a deep grinding type noise in the same location while driving not constant


Hello Karla,

It sounds like you may have a bearing or CV joint going out. Your vehicle will need to be jacked up and inspected. It may be more than one problem too. Its possible the dragging noise could be something between brake pads and rotor, but the grinding that comes and goes in reference to direction sounds like a bearing or joint. I would take it to a professional right away and ask for an estimate only, and then get other estimates from other shops as well. Good luck to you.

Nov 25, 2013 | 2003 Chevrolet Silverado 1500

1 Answer

Grinding sound in front


Check your front brakes. If the fluid in the brake master cylinder is down so are the brake pads

May 25, 2010 | 2004 Chevrolet Silverado

2 Answers

Grinding sound front end not the brakes when car is moving


If you know for sure it is not the brakes, then the other 2 options are the bearing in your drive shaft hub, or the drive shaft CV joint assem.
Really the only way to tell is put it up on safety jack stands with the park brake on, and rear wheel chalked, remove the front wheels and have someone listen while you put the car in drive. Let the drive turn slowly at idle and see what you find.
Please let me know what you find

Feb 08, 2010 | 2003 Saturn ION

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

1 Answer

2004 silverado 4x4 2500 left front wheel bearing


  1. Raise and support the vehicle.
  2. Remove or disconnect the following:

    Tire and wheel assembly Caliper and rotor Wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle Electrical connection for the wheel speed sensor Front drive halfshaft assembly on four wheel drive models Hub and bearing assembly mounting bolts Hub and bearing assembly O-ring seal from the steering knuckle bore (2500 series)
  3. Clean and inspect the O-ring seal
To install:
  1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly.
  2. Install the O-ring to the steering knuckle (2500 series).
  3. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent.
  4. Install or connect the following:

    Hub and bearing assembly Hub and bearing assembly mounting bolts. Tighten the bolts to 133 ft. lbs. (180 Nm). Front drive halfshaft assembly on four wheel drive models Electrical connection for the wheel speed sensor Wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle. Tighten to 106 inch lbs. (12 Nm). Rotor Tire and wheel assembly.
You can go to autozone.com and register for free online repair manual with everything you need.

Jan 19, 2010 | 2004 Chevrolet Silverado 2500 Crew Cab

1 Answer

Grinding in front end


If the sound changes as you turn side to side it is your wheel bearing (hub assy)

Sep 24, 2009 | 2003 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2004 Chevrolet Silverado Logo

584 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...