Question about 1995 Chevrolet Silverado 2500

1 Answer

I have a 1995 silverado after start up , it idels high, engine light comes on, putting it in gear, it jerks, but if I put in back in park while still idel high and tap gas it will go down to normal, then the engine light will go off, it goes in gear and shifts normal, whats the problem, please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 3,433 Answers

May be throttle position sensor. The engine light comes on because of afault signal from one of the sensors. Going out is temporary. After 3 events, the ligh will come on again. It needs to be scanned to find the problem sensor. more than likely the TPS. Good luck

Posted on May 25, 2010

Testimonial: "thank you , do I need to go and have it put on a machine, if so were, and how much?"

  • Ned C Cook
    Ned C Cook May 30, 2010

    Sorry for such a delay in this answer. You probably already have taken it to someone for scanning.Can I ask what was found? I would appreciate the info and feedback. -Ned-

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 chevy silverado 2500 diesel automatic put in reverse but will not back up


you need to check the code that it set with a scanner and it will lead you to where to check to fix problem

Dec 23, 2012 | 2002 Chevrolet Silverado 2500HD

1 Answer

My mercury montego idels too fast and when you put it into gear it jerks the transmission


This car has an automatically controlled idle speed system, so when you have a problem like this you must have the dealer run what is called an active engine running test, the test puts the engine through the paces and returns data to show possible problems.

Jun 07, 2012 | 2005 Mercury Montego Luxury

1 Answer

94 wrangler dies in gear


You don't need a scanner. If you cycle the key off and on 5 times, the codes will start flashing. Here is a link to jeeps and their trouble codes. There aren't that many in the older OBD-1 systems.
https://www.2carpros.com/articles/retrieve-trouble-codes-for-chrysler-dodge-plymouth-odb1-1995-and-earlier-car-mini-van-and-light-trucks

If you have no trouble codes, check fuel pressure. Multiport injection is high pressure, above 40psi, but Jeep would have specs.

May 11, 2017 | 1994 Jeep Wrangler

1 Answer

How to adjust idle on park ave


Sounds like you have another Vacum Leak, What is this thing idleing speed AT...?????? Vacum Leak Cause high Fast Idel...so i would check futher into more leaks

Dec 16, 2009 | 1996 Buick Park Avenue

1 Answer

1995 lesabre keeps jerking when i put it into gears.


There has been a rash of 60% Ethanol gas in my area lately which has caused the same problems. Gas should only contain 10% Ethanol max. You may want to run it out of gas or drain the tank. May also be a dirty fuel filter.

Jul 28, 2009 | 1995 Buick LeSabre

1 Answer

Wont idel when warmed up


seems to me there may be a problem with the transmission, because you say it runs fine in neutral and dies when you put it in gear!!!
only logical thing if everything else you mentioned has been ruled out!!!

Jun 18, 2009 | 1995 Dodge Dakota

1 Answer

Vibrations in truck when ideling and when accelerating


That might be a problem with motor mounts. Raise the hood,start truck and while holding the brake put in gear and slowly press accelerator. A bad motor mount will allow the engine to twist in place. Don't forget to check the transmission mounts also.

Feb 09, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Safety switch in transmission ?


Your Gear Position Sensor is failing. It's common on these models for this part to fail. It's common for the check engine light to also come on and store a code for this sensor.

http://repairpal.com/volvo-850-1995


Nov 18, 2008 | 1995 Volvo 850

Not finding what you are looking for?
Cars & Trucks Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...