Question about 2000 Jeep Grand Cherokee

1 Answer

2000 Jeepgrand Cherokee,has no brake lights, bulbs are good

Posted by on

  • Richard Scordino May 25, 2010

    fuse good? switch have power and working? check the body control module? Outside part of bulb sockets grounded properly?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 715 Answers

Replace switch at the top of the brake pedal

Posted on May 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 grand Cherokee Laredo v8 all my brake lights went out checked the bulbs fuse and brake switch all are good the tail and signal lights are good. what should I do nextto fix the problem


Have you checked the brake light fuse to see if there is power at the fuse and out of the fuse, also check the brake light switch for power in and out when the pedal is pressed, do that and get back to me.?

Oct 26, 2016 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Have a 2000 Jeep Grand Cherokee my rear running lights work, but brake lights are not working.


try putting in new bulbs it could be the brake part of the bulbs are defective

Nov 19, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee, I had blinkers and flashers no brake lights, and after checking the bulbs in the light itself I dont have blinkers or flashers at all


Just no turn signals in the back now? Maybe didn't install the bulbs tight back into the asm? No brake lights...do the lights work with headlights on and just no illumination with the brake pedal depressed? Could be brake light switch.

Oct 01, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2000 Cherokee: brake lights out but bulb still works. fue ?...


replace bulb using twin element bulb if still no joy then check for power at bulb if ok then replace brake light switch located at brake pedal

May 05, 2010 | 2000 Jeep Cherokee

1 Answer

Jeepgrand cherokee 2000 engine warning light on


go to your local auto patrs store and ask them to read your computer to see you CODES on it. it many just be an O2 senors easliy replace.

Apr 18, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Brake light out not necessarily the bulb.


Get test light, straight wire from good side too bad side.

Mar 29, 2010 | 2000 Jeep Grand Cherokee

1 Answer

My 2000 jeep brake lights don't work but the rest do all bulbs are good


check the brake light fuse with a test light on both sides of the fuse,if it is good use the test light to check for power at brake light switch,then push on pedal while using test light to see if power is going out of stop light switch in the other wire,

Jan 12, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Brake lights out on jeep


This may sound too simple, but it's the same with low beam headlights, until they both burn out you didn't know you had any problems. The cops are usually good for helping us keep track of this. Try two new bulbs.All three bulbs are on the same fused circuit so that eliminates that problem. Let me know how this turns out, Dana

Aug 20, 2009 | 2000 Jeep Grand Cherokee

2 Answers

1997 Jeep grand cherokee


Sounds like your brake light switch needs to be replaced.  It is attached to the brake pedal and should cost you around $20 from an auto parts store.  If the fuses and bulbs are good there is a 99% chance it is the brake light switch.  Hope this helps!  Thanks for an honest rating and for using FixYa.

May 19, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...