Question about 1994 Honda Civic

1 Answer

Rear washer fluid pump doesn't work

The rear washer fluid pump to put the fluid on the window doesn't work. I have checked all the relays and fuses and I still can't get it to work. How can I fix this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 973 Answers

The pump is probably bad. Take the pump out and connect the leads to 12v and see if it works.

Posted on May 25, 2010

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 651 Answers

SOURCE: Windsheld and rear window washer not working.

yes, but cars not that old. make sure electrical connector is on snug.

Posted on Jan 06, 2009

  • 1 Answer

SOURCE: odyssey rear window washer fluid not spraying where is reservior

The reservoir is the same one for the front washers. There are two electric pumps on the base of the reservoir (one for front and one for rear). You probably need a new pump. It is accessible behind the panel in front of the front right wheel.

Posted on Jan 31, 2009

  • 60 Answers

SOURCE: rear window wiper washer don't work fuses and

The switch may not be making contact or wire to switch may have come off. If poss check voltage on the water pump for your rear screen. You may also have a bad earth.

Posted on Dec 07, 2009

  • 1011 Answers

SOURCE: Window washer fluid won't pump out

check to see when you operate washer switch see are you getting voltage to washer pumpif your getting power to pump then more than likely pump faulty if no power to pump check switch and lever

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear Window washer ceased functioning, wiper works. Swapped relay with another one, no change. Reservoir is full. Front washer works fine.


Do you hear the pump running when you command the rear washer? If not, check fuse #7 and relay #38 in the rear fuse panel. If the pump is running, then you have either a blockage in the line going to the back or a break in the line.

Sep 13, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

2001 Escape. Rear window washer doesn't work. No noise. Front one works. Is there a relay? Where?


I belive on the bottom of the washer fluid resivor their is a pump for the front windshield and a pump for the back glass that pump may be bad.

Jun 05, 2011 | Ford Escape Cars & Trucks

2 Answers

Rear window washer does not spray fluid. When I push the rear window washer button, the front washer/wipers turn on. The rear wipers work normally.


I have the same problem with my 2000 chevy blazer as skornec had posted. I kinda already figured the hose or spray nozzle was plugged. But the problem with checking those items is that I don't know where the hose is located to the back wiper. And the only thing that could be I see that could be the spray nozzle doesn't even have holes that washer fluid could spray from. So basically I just would LOVE if someone could please inform this lame brain of where to find the spray nozzle on the rear window and where in the interior of my blazer does the washer hose run.

Apr 02, 2010 | 2000 Hyundai Accent

1 Answer

On my 06 equinox the rear window fluid is empty and I cant find how to refil it


The fluid for the rear washer just comes from the front fluid container. If it is not coming out through your rear squirter, try and hold the lever that makes it spray for about 10 seconds. If it is still not working, there may be either a blockage in the lines (if you live in a cold climate it could be frozen), or the line may be broken or disconnected, or the pump that supplies washer fluid to the rear window could be burned out, or the fuse could be blown.

If you activate the rear window washer, do you hear any pumps making any noises? If it is making noises, then the pump works, meaning either the line is frozen, broken, or disconnected.
If you do not hear pump noises, then it is either your fuse for the pump, the pump itself, or perhaps even the switch (which is less likely)

All of these solutions are only going to help if you make sure that the washer fluid container is full :)

Jan 19, 2010 | 2006 Chevrolet Equinox

1 Answer

1998 Ford Explorer Where is the rear windshieldwasher fluid resivior located?


The rear windshield washer fluid for the rear window uses the same as the front. if it is like a '99 Explorer, it has one pump that has reversing current controlled by two relays . Access the relay box by removing air cleaner top and hose near right front corner. The front and rear washer relays are the two near the rear of the box. One of the two is sticking or has corroded terminals. You can use the horn or a/c relay from the relay and fuse box near the battery.Good luck and hope this helps.

Dec 08, 2009 | 1998 Ford Explorer

1 Answer

Rear window wiper washer don't work fuses and


The switch may not be making contact or wire to switch may have come off. If poss check voltage on the water pump for your rear screen. You may also have a bad earth.

Dec 07, 2009 | 2002 Chevrolet Blazer

2 Answers

The rear wiper on my '99 model exped isnt working ,ford global says its the motor and it will cost me P13k . any one who can help me find a mechanic do some repair on this?


what is P13K?

check the fuse first. dealer can hook up NGS Tester and get fault codes to see what is wrong.

Principles of Operation
NOTE: The generic electronic module (GEM) will not activate the rear wiper system if either the liftgate or the liftgate glass is ajar. If either the liftgate or the liftgate glass becomes ajar while the rear wiper is in operation, the GEM will park the rear wiper motor.
There are two distinct modes of wiper operation:
  • Off Mode: In this mode, there is no rear wiper activity, and the wiper motor will be in the PARK position.
  • Interval Mode: This mode is selected when the rear wiper switch is in either the Interval 1 or 2 position. When this mode is selected, the rear wiper motor is driven up onto the glass by activating the rear wiper UP relay. When the wiper motor HIGH/LOW/PARK position input reaches the high position, the UP relay is deactivated and the DOWN relay is activated to reverse the wiper motor direction. When the wiper motor reaches the LOW position, as determined by the HIGH/LOW/PARK position input, the GEM deactivates the DOWN relay and will begin a new wiper cycle 1 to 10 seconds later, depending on the interval position selected.
To engage the rear window washer, rotate the rear window washer selector downward to the WASH position. The rear window wiper will run as long as the WASH position is selected. When the rear window washer selector returns to the OFF, INT 1 or INT 2 position, the washer will stop immediately, but the rear window wiper will continue for two to three sweeps and then return to its previous mode of operation.
The low washer fluid indicator chime warns that the washer fluid level is low. The low washer fluid indicator chime is a single tone with a duration of one second. The chime will sound when the low washer fluid indicator is initially activated.
The low washer fluid indicator warns that the fluid level in the washer reservoir is low. The low washer fluid indicator will illuminate when the washer fluid level is low and the ignition switch is in the RUN position.
The low washer fluid indicator will deactivate when the washer fluid reservoir is filled and the ignition switch has been cycled from RUN to OFF, then to RUN.
Inspection and Verification
  1. The wiper/washer system is a generic electronic module (GEM) controlled system; refer to Section 419-10 .
  1. Verify the customer concern by operating the wiper/washer system.
  1. Visually inspect for obvious signs of mechanical and electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Hoses to windshield washer pump
  • Wiper linkage
  • Fuses 6 (5A), 8 (5A), 15 (5A), and 20 (5A)
  • Wiring harness
  • Loose or corroded connector(s)
  • Relays
  • Motors
  • Multifunction switch
  • Washer fluid level switch


----------------------------------------
  • The wipers are inoperative — rear
  • Fuses 6 (5A), 8 (5A), 15 (5A), and 20 (5A).
  • Circuitry.
  • GEM.
  • Multifunction switch (wiper/washer switch).
  • Rear wiper up relay.
  • Rear wiper down relay.
  • Rear wiper motor.

May 12, 2009 | 1999 Ford Expedition

2 Answers

Rear window washer not working.


it could a blockage at the spayer outside .take a safety pin and poke in the small hole outside.
to check the button remove,it from the dash take a
12volt tester check to make sure you have poweon one side

Apr 12, 2009 | 2000 Dodge Caravan

3 Answers

Windshield washer Pump doesn't run, but the pump checks out good


there is another small relay box just below the windshield washer reservoir about 11/2" wide x about 4" long the washer pump relay is in there



Nov 23, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1994 Honda Civic Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...