Question about 2000 Renault Sportwagon

2 Answers

I have a renault megane 1998 2.0L rxe saloon could i put a 1.6 airbag ecu in to it to replace my broken one.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

Hi

NO
Any repairs carried out on the airbag system the main airbag computer has to be locked by the diagnostic tool otherwise this could trigger airbags to go off.

All configurations to airbag computer must be printed out for a new computer to be stored and configure rated.
If the vehicle is only equipped with pretensioners and a driver’s air bag or only with pretensioners,
the computer configuration will have to be changed.
In the event of the computer configuration not corresponding to the vehicle equipment, the air bag warning light remains illuminated.

Anyhow I don't believe that the connector connected to the airbag computer will be the same to start off with.
You can confirm this by checking the part number.

I hope this information will somehow hopeful!

Posted on May 27, 2010

  • Roy464 May 27, 2010

    I hope this information is somehow helpful

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

If the computer in your car will except it then i wouldnt see why not, make sure you test sensors before actually installing, you might get it all together and find out that it will not work or it will fail other sensors in the vehicle

Posted on May 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renault megane 2007 model 1.6 - ECU Repaired. Car starts now but is in limp mode. My Mechanic tells me that the looses volts on tps body after start. He cannot figure out why


Get another technician that knows what he is doing Who suggested the ECU? They very seldom fail (2% fail rate industry wide) and many times customers are told "OH it must be the computer" sound familiar?

Jun 21, 2016 | 2007 Renault Megane II

1 Answer

Renault megane 2006 has airbag light on and the codes are DF077, DF 182 and DF183 please answer


Look under both front seats and you will see thin wiring with yellow or orange plugs secured to underside of seat. Undo the plugs, spray with contact cleaner and plug back together. Usually puts light off too.

Feb 21, 2015 | 2006 Renault Megane 1.6

1 Answer

Where is the airbag control module on a megane


The main control module/ecu for the airbags is under the center console

Feb 18, 2015 | 2006 Renault Megane 1.6

1 Answer

My 2001 renault megane prelude 1.6 16v rxe hatchback automatic is difficult to start when hot can someone please help


most likely cause is the temperature sensor for the autochoke ,cannot remember where it is exactly on this model but look around the head area

May 19, 2012 | Cars & Trucks

1 Answer

I have difficulty starting my 2001 renault megane 1.6 16v rxe hatchback automatic when hot can someone please help


2001 renault ,you jest here iam sure this vehicle is all encrypted software the only thing that can be read via the OBDII is the chassis number so its a grin and bear it and pay through the nose at the dealers job ,My favourite car a renault as their is pratcicaly nothing i can do to these cars fault finding wise ,yes i know a few tricks on what goes wrong but often disconnect a sensor and the thing goes do dally tat and will not start at all but try the auto choke temperature sensor on the cylinder head

May 19, 2012 | Renault Megane Cars & Trucks

1 Answer

Where is fuel cut off switch on 03 megane


The fuel cut out switch is built into the airbag computer (ecu), as it is only required to operate in the event of an accident. The airbag computer is located under the centre console. It is more likely that the tdc sensor has a faulty connection or the camshaft sensor is faulty. If the fault persists after you have filled up with fuel the best thing to do is get a diagnostic test carried out on the injection system to check for any possible fault codes.

Apr 04, 2012 | Renault Megane Cars & Trucks

2 Answers

Error message "Steering Fault" : Renault Megane


  • This is a common fault with this vehicle. You have electric steering and it starts out not to bad and then becomes impossible to turn. It would be best to have yours refurnished as new ones are quite pricey.


  • Hope this helps.
Regards, Tony

Oct 27, 2011 | Cars & Trucks

1 Answer

Steering wheel started clicking and got airbag warning light on - renault megane 5 plate


When the airbag light (SRS) is on or blinks it means a fault has occurred in the system and the airbag diagnostic monitor has disabled the system, the most common problem that turns the light on is a break in the connection to the steering wheel mounted airbag, this is due to a rotating ribbon contact that breaks under the steering wheel that connects the airbag to the wiring harness and the diagnostic monitor, the part is called the clock spring contact, a coiled up ribbon electrical contact that turns with the steering wheel while maintaining a mechanical connection to the airgag mounted on the steering wheel, to replace this part you must disarm the airbag system and remove the steering wheel, this requires a special steering wheel puller tool and that you disarm the airbag system before you start the work, to do this disconnect the battery negative cable for 1/2 hour prior.

Apr 27, 2010 | Renault Sport Cars & Trucks

1 Answer

Renault Megane RXE if the cam belt breaks while driving and the engine stops will it have caused any damage to the engine?


you prob bent some valves or worse. you will need to get someone to remove the head and check it. its a big job

Oct 08, 2009 | 1997 Toyota RAV4

1 Answer

Renault megane classic 11 engine vibrates with loss of power when started


famous froggy electrics again ,renault garage to get ECU sorted ,buy a new car its cheaper than paying garage

Jul 20, 2008 | 2004 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...