At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Change bulbs and or reseat bulbs. Flaher relay may be bad. Check for clicking noise once you engage signals. If no clicking noise then flasher realy is bad or needs reseated. The clicking noise is your flaher relay. If you dont hear any clicking more than likely flasher relay is your problem. Easy fix
the fuse box is located lower dash drivers side ,cover/lid usually has list inside to the fuse locations etc, does the four way switch turn the signal lights on ? if so the fuse for the turn signals is probably the issue , if the four ways don't come on it may be the flaher relay which may be in the interior fuse box but if not the fuse box in the engine compartment is the next place to look, hope this helps
Chevy puts more then one fuse box. Chevy's have wiring problems due to using a wire that is to small & hard. After you have replaced bulbs & fuses. And it's still not working if you can take it to a shop. You could have a broken wire OR a bad switch.
first you need to check the ground connection of the tail lamp, poor ground connection might be the cause. about the turn signal, clean the turn switch using contact cleaner spray. If this cannot solve the problem. The switch have to dissmantle and service manually.
your flaher relay is actually your 4 way flaher unit. just remove the trim panel from the front of your center consol (the one that surrounds your radio) and remove the switch ffrom behind. btw is it only your signal lamps not working or are your 4 ways not working either. your problem may also lie in your multi-function switch
×